Passing the Huawei H19-404_V1.0 exam at first attempt is a goal that many candidates strive for. However, some of them think that good HCSE-Presales-Campus Network Planning and Design V1.0 (H19-404_V1.0) study material is not important, but this is not true. The right H19-404_V1.0 preparation material is crucial for success in the exam. And applicants who don’t find updated Huawei H19-404_V1.0 prep material ultimately fail in the real examination and waste money. That's why DumpsActual offers actual Huawei H19-404_V1.0 exam questions to help candidates pass the exam and save their resources.
| Section | Objectives |
|---|---|
| Campus Network Fundamentals | - Enterprise campus network architecture principles - Typical campus network deployment models |
| Presales Solution Design | - Solution proposal and design methodology - Customer requirement analysis |
| WLAN Planning and Design | - Capacity and performance design considerations - Wireless coverage planning |
| Huawei Campus Network Solutions | - iMaster NCE-Campus management platform - CloudCampus solution architecture |
| Switching and Routing in Campus Networks | - VLAN and segmentation design - Layer 2 and Layer 3 design principles |
| Network Security Design | - Access control strategies - Campus security architecture considerations |
>> Question H19-404_V1.0 Explanations <<
By these three versions of H19-404_V1.0 practice materials we have many repeat orders in a long run. The PDF version helps you read content easier at your process of studying with clear arrangement, and the PC Test Engine version of H19-404_V1.0 practice materials allows you to take stimulation exam to check your process of exam preparing, which support windows system only. Moreover, there is the APP version of H19-404_V1.0 practice materials, you can learn anywhere at any time with it at your cellphones without the limits of installation.
NEW QUESTION # 17
Which of the following statements is true about an AP's transmit power?
Answer: A
Explanation:
An AP's transmit power must be maintained within an appropriate range. Excessive power does not automatically improve service quality. A high-power AP can enlarge its interference domain, create co- channel or adjacent-channel interference, produce asymmetric uplink and downlink coverage, and cause sticky-client behavior because a station continues hearing an AP even when its weaker transmission cannot reliably reach that AP. Huawei states that high-power APs can interfere with adjacent APs and that radio calibration dynamically adjusts AP channels, power, and frequency bands to ensure coverage while minimizing interference.
Conversely, power that is too low creates coverage holes, weak received signal strength, low modulation rates, retransmissions, and roaming instability. When a new AP is added, neighboring APs may reduce their transmit power to limit interference. When an AP goes offline, neighboring APs may increase power to compensate for the missing coverage. The engineering objective is therefore neither maximum nor minimum power, but sufficient coverage with controlled overlap and minimum interference. Accordingly, option B is correct.
NEW QUESTION # 18
Intelligent policy recommendation can achieve network-level load balancing.
Answer: A
Explanation:
The statement is true. Intelligent policy recommendation does not consider only the traffic load of an individual interface or device. iMaster NCE-Campus obtains network topology, application, link-quality, bandwidth-utilization, and traffic-distribution information from multiple devices. It can then recommend or orchestrate policies that distribute traffic across the network's available paths and resources.
For example, when multiple WAN links have the same priority and satisfy an application's SLA requirements, per-flow load balancing can distribute different application flows among those links.
Bandwidth-proportional balancing can also account for differences in link capacity, preventing a lower- bandwidth link from being overloaded. Huawei explains that load-balancing-based traffic steering can fully utilize multiple links and distribute flows across links meeting the required SLA.
Because iMaster NCE-Campus centrally manages CPEs and uniformly orchestrates service intent across the overlay network, recommendations can be evaluated from a network-wide perspective instead of through isolated local decisions. Therefore, intelligent policy recommendation can implement network-level load balancing.
NEW QUESTION # 19
It is recommended that policy association be deployed between the access and aggregation layers when distributed VXLAN gateways are used and VXLAN is deployed across the core and aggregation layers.
Answer: A
Explanation:
The statement is true. In this three-layer campus design, aggregation switches function as VXLAN edge nodes and distributed gateways, while access switches provide terminal connectivity. Policy association allows the access switches to participate in user admission and policy enforcement without requiring them to support full VXLAN functions.
The access switch collects terminal access information and associates user traffic with the appropriate service or policy. The aggregation switch, acting as the fabric edge and VXLAN tunnel endpoint, performs VXLAN encapsulation, distributed gateway forwarding, and policy-related operations. Huawei specifically states that when aggregation switches operate as edge nodes, access switches do not need to support VXLAN and can cooperate with aggregation switches through policy association. This also permits legacy access switches to be reused.
The design reduces upgrade costs and avoids extending complex overlay configurations to every access device. Huawei's automated virtual-network deployment model also explicitly includes policy association between the aggregation and access layers, allowing access switches without VXLAN capability to operate as transparent or associated access nodes. Therefore, option A is correct.
NEW QUESTION # 20
Which of the following deployment modes are supported by APs?
Answer: A,B,D
Explanation:
APs support barcode scanning through the CloudCampus APP, DHCP Option 148-based deployment, and deployment through Huawei's registration query center. With barcode scanning, the installer scans the AP's label using the CloudCampus APP. The application obtains information such as the electronic serial number and MAC address, associates the AP with the correct tenant and site, and allows the AP to register with iMaster NCE.
With DHCP Option 148, the DHCP server supplies the AP with its IP configuration and the IP address and port number of iMaster NCE. The AP changes to cloud-management mode and automatically initiates registration. Huawei lists AR routers, switches, and APs as supported devices for this mode.
The registration query center can also provide the controller address after the AP contacts Huawei's query service. It supports APs together with ARs, firewalls, and switches. Email-based deployment is primarily an SD-WAN CPE or AR-router ZTP method, not an AP deployment mode. Therefore, A, C, and D are correct.
NEW QUESTION # 21
In hierarchical networking, which of the following devices is used for communication between different areas?
Answer: B
Explanation:
A border device, or more precisely a device at a border site, provides communication between different areas in a hierarchical SD-WAN topology. The hierarchical model divides a large WAN into multiple areas. Each area can independently use a hub-spoke or full-mesh topology, while selected border sites connect the local area to a centralized backbone area.
When a non-border site receives a route originating in another area, the route's next-hop site ID is changed to the border site in its own area. The local border device then forwards traffic toward the border site in the destination area or toward an interconnected hub site. Ordinary edge devices provide connectivity for their own sites but do not automatically perform cross-area transit.
Huawei describes border sites as members of both the level-2 area network and the level-1 backbone network.
These sites collectively implement interconnection between areas. Huawei further explains that inter-area routes point to border sites and recommends two border sites operating in active/standby mode for reliability.
Therefore, the correct answer is B.
NEW QUESTION # 22
......
Everyone wants to succeed. As a worker in IT industry, you know how important the H19-404_V1.0 exam certification is for your career success. There are more and more people to participate in H19-404_V1.0 certification exam, and how to win in the increasingly competitive situation? To chose the right hand is the key. Our DumpsActual team has studies the H19-404_V1.0 Certification Exam for years so that we have in-depth knowledge of the test. We believe that you must be succeed in the exam with the help of H19-404_V1.0 test software provided by our DumpsActual.
H19-404_V1.0 Hot Spot Questions: https://www.dumpsactual.com/H19-404_V1.0-actualtests-dumps.html