P.S. Free & New NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by DumpsQuestion: https://drive.google.com/open?id=1yDuc7C_E9dS9S9ufEvaJWT0udbhYkfjs
If you purchase Fortinet NSE5_FSW_AD-7.6 exam questions and review it as required, you will be bound to successfully pass the exam. And if you still don't believe what we are saying, you can log on our platform right now and get a trial version of Fortinet NSE 5 - FortiSwitch 7.6 Administrator NSE5_FSW_AD-7.6 study engine for free to experience the magic of it.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> High NSE5_FSW_AD-7.6 Passing Score <<
In order to cater to different needs of customers, three versions for NSE5_FSW_AD-7.6 training materials are available, you can choose the most suitable one in accordance with your own needs. NSE5_FSW_AD-7.6 PDF version is printable, and if you prefer a hard one, you can choose this version. NSE5_FSW_AD-7.6 Soft test engine supports MS operating system, and it can install in more than 200 computers. NSE5_FSW_AD-7.6 Online Test engine is convenient and easy to learn, you can have offline practice if you want. NSE5_FSW_AD-7.6 Online soft test engine supports all web browsers and it has testing history and performance review, and you can have a general review of what you have learnt before next learning.
NEW QUESTION # 22
Exhibit.
port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
Answer: B,D
NEW QUESTION # 23
Refer to the exhibit.
You have just authorized a new FortiSwitch on your FortiGate, and it appears online in the GUI. To verify that FortiLink connectivity is healthy, what should you check next? (Choose one answer)
Answer: D
Explanation:
According to theFortiOS 7.6 Study Guideand theFortiSwitch 7.6 FortiLink Guide, the health and stability of the control plane between a FortiGate and a managed FortiSwitch are maintained through a continuous keepalive mechanism. Once a FortiSwitch is authorized and transitions to theFL_STATE_READYstate (as shown in the debug output in the exhibit), the devices must ensure the management tunnel remains active.
The primary mechanism for this is theFortiLink heartbeat. The documentation specifies that a managed FortiSwitch sends heartbeat messages to the FortiGate every few seconds over the FortiLink interface. The FortiGate, acting as the controller, must acknowledge these heartbeats to confirm that the switch is still reachable and responding to management commands. If the FortiGate fails to receive a certain number of consecutive heartbeats, it will consider the switch "offline" in the GUI, even if physical link lights remain green.
Checking for these heartbeat exchanges is a critical troubleshooting step to verify that theCAPWAP(Control and Provisioning of Wireless Access Points) based management tunnel is functioning correctly without intermittent drops. Option A is incorrect as port disabling is a configuration choice, not a health check. Option C is incorrect because firmware updates are manual or scheduled, not automatic upon authorization. Option D is a logging function that relies on a healthy management tunnel but is not a direct measure of the FortiLink's operational health.
NEW QUESTION # 24
Which QoS mechanism maps packets with specific class of service (COS) or Differentiated Services Code Point (DSCP) markings to an egress queue? (Choose one answer)
Answer: C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, Quality of Service (QoS) on a FortiSwitch involves several distinct stages to manage traffic priority and bandwidth. The specific process of taking identified packets and placing them into a specific priority buffer for transmission is known asQueuing.1 On FortiSwitch, when a frame enters an ingress port, it is first classified based on its incomingCoS(Layer 2) or DSCP(Layer 3) markings.2However, it is theQueuing for egress traffic (Option B)mechanism that dictates which of the eight available hardware queues the frame will reside in before it is sent out of the destination port. The switch uses a mapping table (such as a CoS-to-queue or DSCP-to-queue map) to ensure that high- priority traffic, like voice or video, is placed in a higher-priority queue to minimize latency and jitter.
Regarding the other options:Classification (Option A)is the initial identification of the packet's priority but does not perform the physical mapping to a buffer.Policing (Option C)is an ingress mechanism used to drop or remark traffic that exceeds a defined rate.Shaping (Option D)is an egress mechanism that smooths out traffic bursts by delaying packets but is separate from the initial queue assignment. Therefore, the act of mapping specific markings to an egress queue is a fundamental function of the queuing mechanism.
NEW QUESTION # 25
Refer to the exhibits
Traffic arriving on port2 on FortiSwitch is tagged with VLAN ID 10 and destined for PC1 connected on port1. PC1 expects to receive traffic untagged from port1 on FortiSwitch. Which two configurations can you perform on FortiSwitch to ensure PC1 receives untagged traffic on port1? (Choose two.)
Answer: A,B
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the way a FortiSwitch handles VLAN tags on egress (outgoing) traffic is governed by the port'sNative VLANand its Untagged VLAN list. When traffic for VLAN 10 arrives at port2 (the uplink) and is forwarded to port1, the switch must determine whether to strip the 802.1Q tag before transmission.
* Untagged VLAN List (Option B):The documentation explicitly states that the "untagged VLAN list" specifies VLANs for which the port will transmit frameswithout the VLAN tag. By adding VLAN ID
10 to the untagged VLANs on port1, any traffic belonging to VLAN 10 will have its tag stripped at the egress point, ensuring PC1 receives a standard untagged frame.
* Configuration Logic (Option C):In FortiSwitch management, moving a VLAN from the "Allowed" list (which typically implies tagged delivery) to the "Untagged" list on a specific interface forces the switch to perform the tag-stripping action. This effectively converts the port from a trunked behavior for that VLAN to an "access" or untagged behavior.
Regarding the incorrect options:Option A (MAC-based assignment)is used primarily foringress classification. While it can assign a device to a VLAN when it sends trafficintothe switch, the documentation notes that by default, egress packets for MAC-based VLANs still include the tag unless the untagged list is configured.Option D(Private VLANs) is a security feature for isolating traffic between ports within the same VLAN and does not address the physical tagging requirements of the endpoint.
NEW QUESTION # 26
In which two ways can you assign a FortiSwitch port to a VDOM using a multi-tenancy setup? (Choose two answers)
Answer: A,B
Explanation:
According to theFortiOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, multi-tenancy in a FortiLink-managed environment allows a central FortiGate to partition a managed FortiSwitch fabric so that different ports can belong to different Virtual Domains (VDOMs). This is essential for Managed Service Providers (MSPs) who need to isolate client traffic at the hardware layer.
The documentation identifies two primary methods for achieving this assignment:
* Assign to a VLAN and Perform VDOM Mapping (Option A):This is the most common method. The administrator creates a VLAN on the FortiLink interface and assigns it to a specific VDOM on the FortiGate. By assigning a physical FortiSwitch port to that specific VLAN, the port's traffic is logically terminated within the target VDOM. TheVDOM mappingensures that the switch-controller identifies which VDOM "owns" the traffic originating from that specific port/VLAN combination.
* Create a Virtual Port Pool (Option B):For more advanced multi-tenancy, administrators can use the FortiGate CLI to create aVirtual Port Pool. This feature allows the FortiGate to "pool" physical switch ports and present them as logical resources that can be distributed across various VDOMs. This method provides greater flexibility in resource allocation without requiring the entire FortiLink interface to be moved.
Regarding the incorrect options:Option Cis incorrect because in a managed environment, the FortiSwitch CLI is not used for VDOM assignments; all orchestration must happen from the FortiGate.Option Dis incorrect because while you can move a FortiLink interface to a VDOM, this would move theentireswitch management and all its ports to that VDOM, which does not support a multi-tenant setup where different ports need to reside in different VDOMs.
NEW QUESTION # 27
......
Our NSE5_FSW_AD-7.6 learning guide is for the world and users are very extensive. In order to give users a better experience, we have been constantly improving. The high quality and efficiency of NSE5_FSW_AD-7.6 exam prep has been recognized by users. The high passing rate of our NSE5_FSW_AD-7.6 test materials are its biggest feature. As long as you use NSE5_FSW_AD-7.6 Exam Prep, you can certainly harvest what you want thing. Not only you can pass the NSE5_FSW_AD-7.6 exam in the shortest time, but also you can otain the dreaming NSE5_FSW_AD-7.6 certification to have a brighter future.
NSE5_FSW_AD-7.6 Top Exam Dumps: https://www.dumpsquestion.com/NSE5_FSW_AD-7.6-exam-dumps-collection.html
BONUS!!! Download part of DumpsQuestion NSE5_FSW_AD-7.6 dumps for free: https://drive.google.com/open?id=1yDuc7C_E9dS9S9ufEvaJWT0udbhYkfjs