JPNTestは、API期待されるスコアを達成してAPI-SIEE認定を取得する価値のあるクライアントにチャンスを与えるための非常に素晴らしい効果的なプラットフォームです。 プロの専門家のたゆまぬ努力により、API-SIEE試験トレントには、タイミング機能を備えた模擬試験システムが装備されており、Source Inspector Electrical Equipment学習結果をいつでも確認し、欠陥をチェックし続け、体力を改善できます。 あなたが学生であろうとオフィスワーカーであろうと、ここで満足することができ、API-SIEE試験トレントを選択しても後悔することはありません。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Electrical Equipment Standards and Specifications | 30% | - Relevant IEC, NEC, and industry specifications - API RP 14F / 14FZ: Offshore electrical systems design & installation - API Std 541: Form-wound Induction Motors (≥ 375 kW/500 HP) - API RP 540: Electrical Installations in Petroleum Processing Plants |
| Topic 2: Source Inspection Principles and Responsibilities | 20% | - Quality management systems and supplier audits - Inspection planning, ITP, and documentation - Roles and responsibilities of source inspectors |
| Topic 3: Testing, Verification, and Acceptance Criteria | 15% | - Nonconformity identification and reporting - Material traceability and documentation review - Electrical testing methods and performance verification |
| Topic 4: Inspection of Specific Electrical Equipment | 35% | - Junction boxes, enclosures, and cabling systems - Large electric motors and generators - Switchgear, control panels, and MCCs - Transformers and reactors |
話と行動の距離はどのぐらいありますか。これは人の心によることです。意志が強い人にとって、行動は目と鼻の先にあるのです。あなたはきっとこのような人でしょう。APIのAPI-SIEE認定試験に申し込んだ以上、試験に合格しなければならないです。これもあなたの意志が強いことを表示する方法です。JPNTestが提供したトレーニング資料はインターネットで最高のものです。APIのAPI-SIEE認定試験に合格したいのなら、JPNTestのAPIのAPI-SIEE試験トレーニング資料を利用してください。
質問 # 27
NEMA rated motor controllers require a minimum range of conductor sizes for a specific size controller.
Which of the following conductor sizes is appropriate for a Size 2 controller?
正解：A
解説：
The correct answer isD. For aNEMA Size 2 motor controller, the appropriate conductor range is10 AWG to 4 AWG for 60°C rated cableand10 AWG to 6 AWG for 75°C rated cable. This matches the common NEMA controller terminal wire range used for Size 2 starters and controllers in industrial motor control applications.
In practical source inspection and shop verification, this matters because the inspector must confirm that the controller terminals are suitable for the intended field wiring and that the manufacturer's assembly, labels, and terminal data are consistent with the governing standard and purchase specification.
The API Guide for Source Inspection and Quality Surveillance of Electrical Equipment includesMotor Control Centersamong the major covered equipment categories for source inspection. The guide also makes clear that its focus is onsource inspection and quality surveillance activities, meaning verification of compliance with drawings, specifications, nameplates, and applicable referenced standards during manufacture and inspection. Since MCC buckets and NEMA motor controllers rely on proper terminal and conductor compatibility,option Dis the correct NEMA-aligned answer.
質問 # 28
This device is a(n):
正解：B
解説：
The correct answer isAbecause the illustrated device is anoutside micrometer. Its labeled parts clearly identify it:frame, anvil, spindle, lock nut, thimble, and ratchet knob. These are the standard components of a micrometer used for highly accurate dimensional measurement of outside diameters, thicknesses, and small gaps. In source inspection and quality surveillance, this type of instrument is commonly used when verifying critical dimensions of machined parts, shaft diameters, plate thicknesses, and other precision features that must comply with drawings and manufacturing tolerances.
The other options do not match the image. Adigital caliperhas sliding jaws and an electronic display. Avernier caliperalso uses sliding jaws with a vernier scale, not a rotating thimble and spindle arrangement. Anengineer' s scaleis a straight rule used for scaled drawing measurements, not for precision mechanical inspection. In API-aligned source inspection practice, understanding inspection tools is essential because inspectors must use the correct measuring instrument for the required tolerance and ensure that the device is properly controlled and calibrated. Therefore, the pictured instrument is correctly identified as amicrometer, makingoption Athe verified answer.
質問 # 29
What document provides information on design and installation of electrical systems for fixed and floating offshore petroleum facilities for unclassified and Class I, Zone 0, Zone 1 and Zone 2 locations?
正解：A
質問 # 30
In a Class I hazardous area, what is the maximum distance from an enclosure, containing arcing devices should a conduit seal be located?
正解：B
解説：
The correct answer isD. InClass I hazardous locations, conduit seals are required near enclosures that containarcing, sparking, or heat-producing devicesin order to prevent the passage of flammable gases or vapors through the conduit system and to limit the spread of an internal explosion. UnderNFPA 70, this seal must be installedas close as practical to the enclosureandnot more than 18 inches 45.72 cm away.
This requirement is important because threaded rigid metal conduit systems can otherwise become a path for hazardous vapors to migrate from one enclosure or area to another. If an ignition occurs inside the enclosure, the sealing fitting helps contain pressure effects and reduces flame propagation through the raceway. From an API source inspection and quality surveillance standpoint, the inspector must verify that hazardous-location installation details, including sealing fittings, match code requirements, approved drawings, and area- classification needs. Seal placement is therefore not just a field convenience item; it is a critical safety feature affecting equipment acceptability in classified service.
Options A, B, and C do not match the NFPA requirement. The maximum permitted distance is18 inches.
質問 # 31
What tool is designed to measure mechanical oscillations?
正解：B
解説：
The correct answer isD. Vibration Meter. A vibration meter is specifically intended to measuremechanical oscillations, usually in terms of displacement, velocity, or acceleration. In source inspection of large electrical equipment, especiallyelectric motors over 500 HP, vibration measurement is important because excessive vibration can indicate problems such as rotor imbalance, shaft misalignment, bearing defects, looseness, soft foot, resonance, or installation errors. Since the API source inspection guide covers surveillance and verification activities for major rotating electrical equipment, understanding the purpose of vibration- measuring instruments is directly relevant to factory testing, condition verification, and acceptance evaluation.
The other options are not correct for this function. Atachometermeasures rotational speed, not mechanical oscillation. Aspectroscopeis used for optical spectrum analysis and is unrelated to machinery vibration.
Anoscilloscopedisplays electrical waveforms and can show signals from sensors, but it is not the primary instrument designed specifically to measure machine vibration in routine inspection practice. Therefore, the best answer isVibration Meter, because it directly measures the mechanical oscillatory behavior of equipment.
質問 # 32
......
生活で他の人が何かやったくれることをいつも要求しないで、私が他の人に何かやってあげられることをよく考えるべきです。職場でも同じです。ボスに偉大な価値を創造してあげたら、ボスは無論あなたをヘアします。これに反して、あなたがずっと普通な職員だったら、遅かれ早かれ解雇されます。ですから、IT認定試験に受かって、自分の能力を高めるべきです。 JPNTestのAPIのAPI-SIEE「Source Inspector Electrical Equipment」試験問題集はあなたが成功へのショートカットを与えます。IT 職員はほとんど行動しましたから、あなたはまだ何を待っているのですか。ためらわずにJPNTestのAPIのAPI-SIEE試験トレーニング資料を購入しましょう。
API-SIEE模擬対策: https://www.jpntest.com/shiken/API-SIEE-mondaishu