BTW, DOWNLOAD part of ITexamReview F5CAB2 dumps from Cloud Storage: https://drive.google.com/open?id=19Hq0kil16a4VMxwOFlw3hgIA07UJHC26
The simulation of the actual F5 F5CAB2 test helps you feel the real F5CAB2 exam scenario, so you don't face anxiety while giving the final examination. You can even access your last test results, which help to realize your mistakes and try to avoid them while taking the F5 F5CAB2 Certification test.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Reliable F5CAB2 Exam Online <<
There is a group of experts in our company which is especially in charge of compiling our F5CAB2 exam engine. There is no doubt that we will never miss any key points in our F5CAB2 training materials. As it has been proven by our customers that with the help of our F5CAB2 Test Prep you can pass the exam as well as getting the related F5CAB2 certification only after 20 to 30 hours' preparation, which means you can only spend the minimum of time and efforts to get the maximum rewards.
NEW QUESTION # 73
Which two statements describe differences between the active and standby systems? (Choose two.)
Answer: A,D
NEW QUESTION # 74
When using the setup utility to configure a redundant pair, you are asked to provide a "Failover Peer IP".
Which address is this?
Answer: A
Explanation:
When establishing a redundant pair, each device must know where to send its health heartbeats and sync data.
* The Peer IP:TheFailover Peer IPis the IP address belonging to theotherBIG-IP device in the HA pair.
This is typically a34Self-IP on a dedicated "HA" or "Internal" VLAN, or the Management IP.
* Purpose:It identifies the destination for the "Heartbeat" (the "Are you alive?" check).
* Setup Context:During the initial setup, you tell Device A to look for Device B at its "Failover Peer IP," and you tell Device B to look for Device A at its respective "Failover Peer IP."
NEW QUESTION # 75
A BIG-IP Administrator is informed that traffic on interface 1.1 is expected to increase beyond the maximum bandwidth capacity of the link. There is a single VLAN on the interface.
What should the BIG-IP Administrator do to increase the total available bandwidth? (Choose one answer)
Answer: A
Explanation:
On BIG-IP systems, physical interface bandwidth is fixed by the link speed (for example, 1GbE or 10GbE).
When traffic demand exceeds the capacity of a single interface, BIG-IP provides link aggregation through trunks.
Key concepts involved:
* InterfacesA single physical interface (such as 1.1) is limited to its negotiated link speed. You cannot exceed this capacity through software tuning alone.
* Trunks (Link Aggregation)A trunk combines multiple physical interfaces into a single logical interface.
* BIG-IP supports LACP and static trunks.
* Traffic is distributed across member interfaces, increasing aggregate bandwidth and providing redundancy.
* VLANs are then assigned to the trunk, not directly to individual interfaces.
Why option B is correct:
* Creating a trunk with two interfaces allows BIG-IP to use both physical links simultaneously.
* This increases total available bandwidth (for example, two 10Gb interfaces # up to 20Gb aggregate capacity).
* This is the documented and supported method for scaling bandwidth on BIG-IP.
Why the other options are incorrect:
* A. Increase the MTUMTU changes affect packet size and efficiency, not total bandwidth capacity.
* C. Assign two interfaces to the VLANBIG-IP does not support assigning a VLAN to multiple interfaces directly. VLANs must be associated with one interface or one trunk.
* D. Set the media speed manuallyMedia speed can only be set up to the physical capability of the interface and connected switch port. It cannot exceed the hardware limit.
Conclusion:
To increase total available bandwidth on BIG-IP when a single interface is insufficient, the administrator must create a trunk object with multiple interfaces and move the VLAN onto the trunk. This aligns directly with BIG-IP data plane design and best practices.
NEW QUESTION # 76
Refer to the exhibit above.
A BIG-IP pool is configured with Priority Group Activation = Less than 2 available members. The pool members have different priority groups and availability states. Which pool members are receiving traffic?
(Choose one answer)
Answer: A
Explanation:
This question tests understanding of Priority Group Activation (PGA) and how BIG-IP determines which pool members are eligible to receive traffic.
Key BIG-IP Priority Group Concepts:
* Higher priority group numbers = higher priority
* BIG-IP will only send traffic to the highest priority group that meets the Priority Group Activation condition
* Lower priority groups are activated only when the condition is met
* Only available (green) members count toward the activation threshold
Configuration from the Exhibit:
* Priority Group Activation: Less than 2 available members
* Pool Members and Status:
Pool Member
Priority Group
Status
serv1
2
Active (available)
serv2
2
Inactive (down)
serv3
1
Active (available)
serv4
1
Active (available)
Step-by-Step Traffic Decision:
* BIG-IP first evaluates the highest priority group (Priority Group 2)
* Priority Group 2 has:
* serv1 # available
* serv2 # unavailable
* Total available members = 1
* Activation rule is Less than 2 available members
* Condition is true (1 < 2)
* BIG-IP activates the next lower priority group (Priority Group 1)
* Traffic is now sent to:
* serv1 (Priority Group 2)
* serv3 and serv4 (Priority Group 1)
Final Result:
Traffic is distributed to serv1, serv3, and serv4
Why the Other Options Are Incorrect:
* A - Ignores activation of the lower priority group
* B - serv4 is also active and eligible
* C - serv2 is down and cannot receive traffic
Key Data Plane Concept Reinforced:
Priority Group Activation controls when lower-priority pool members are allowed to receive traffic, based strictly on the number of available members in the higher-priority group. In this case, the failure of one high-priority member caused BIG-IP to expand traffic distribution to lower-priority members to maintain availability.
NEW QUESTION # 77
A BIG-IP Administrator has a cluster of devices.
What should the administrator do after creating a new Virtual Server on device 1? (Choose one answer)
Answer: A
Explanation:
In a BIG-IP device service cluster, configuration objects such as virtual servers, pools, profiles, and iRules are maintained through configuration synchronization (config-sync).
Key BIG-IP concepts involved:
Device Service Cluster (DSC)
A cluster is a group of BIG-IP devices that share configuration data. One device is typically used to make changes, which are then synchronized to the rest of the group.
Config-Sync Direction Matters
Changes are made on a local device
Those changes must be pushed to the group
The correct operation is "Sync Device to Group"
Why C is correct:
The virtual server was created only on device 1
Other devices in the cluster do not yet have this object
To propagate the new virtual server to all cluster members, the administrator must synchronize device 1 to the group Why the other options are incorrect:
A . Synchronize the settings of the group to device 1
This would overwrite device 1's configuration with the group's existing configuration and may remove the newly created virtual server.
B . Create a new cluster on device 1
The cluster already exists. Creating a new cluster is unnecessary and disruptive.
D . Create a new virtual server on device 2
This defeats the purpose of centralized configuration management and risks configuration drift.
Conclusion:
After creating a new virtual server on a BIG-IP device that is part of a cluster, the administrator must synchronize the configuration from that device to the group so all devices share the same ADC application objects.
NEW QUESTION # 78
......
Let me introduce our F5CAB2 study guide to you in some aspects. First of all, there are three versions of F5CAB2 guide quiz. You can choose the most suitable version based on your own schedule. PC version, PDF version and APP version, these three versions of F5CAB2 Exam Materials have their own characteristics you can definitely find the right one for you. Secondly, you can find that our price of the F5CAB2 learning braindumps is quite favorable. And some times, we will give discounts for them.
Vce F5CAB2 Test Simulator: https://www.itexamreview.com/F5CAB2-exam-dumps.html
BONUS!!! Download part of ITexamReview F5CAB2 dumps for free: https://drive.google.com/open?id=19Hq0kil16a4VMxwOFlw3hgIA07UJHC26