For one thing, the most advanced operation system in our company which can assure you the fastest delivery speed, and your personal information will be encrypted automatically by our operation system. For another thing, with the online app version of our NSEI_OTS_AR-7.6 actual exam, you can just feel free to practice the questions in our training materials on all kinds of electronic devices. In addition, under the help of our NSEI_OTS_AR-7.6 Exam Questions, the pass rate among our customers has reached as high as 98% to 100%. We are look forward to become your learning partner in the near future.
| Section | Objectives |
|---|---|
| Network Security | - Configure virtual patching - Configure security inspections for industrial protocols - Configure automation |
| Network Access Control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
| Asset Management | - Use Fortinet Security Fabric for an OT network - Explain OT standards and Fortinet compliance - Implement device detection on FortiGate and FortiNAC |
| Monitoring and Risk Assessment | - Perform risk assessment and management - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers |
>> Reliable NSEI_OTS_AR-7.6 Dumps <<
Their updated Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice test material includes the latest and real NSEI_OTS_AR-7.6 questions that are very similar to those given in the actual Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam. Additionally, the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice test software creates a realistic NSEI_OTS_AR-7.6 exam environment for users, and it also helps you in your preparation for the actual Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) test. FreeCram offers the latest NSEI_OTS_AR-7.6 exam questions in multiple formats for convenience. These formats include Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) PDF dumps, NSEI_OTS_AR-7.6 Practice Test (web-based), and NSEI_OTS_AR-7.6 Practice Exam Software (Desktop-Based).
NEW QUESTION # 13
Refer to the exhibit.
A basic event handler is shown. You have enabled Automation Stitch to automate the handling of an alert.
Which two steps must you take to use this automation stitch? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are C and D .
Option D is correct because the study guide states that the configuration of an event handler can include
"Rules" and explains that "Rules are granular conditions" and "Event handlers can have one or more rules." It further states that "FortiAnalyzer uses event handlers to filter all incoming logs" and "If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Therefore, to use the automation stitch, you must define the rules on FortiAnalyzer so the event handler can actually generate the event that starts the automation flow.
Option C is also correct. The study guide explains that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to the FortiGate side, and in the attack-detection example it says "FortiAnalyzer parses the logs and notifies the root FortiGate" and then
"The root FortiGate triggers the action." It also explicitly shows "Stitches configured on root FortiGate." This means the FortiGate must have the corresponding automation trigger configured for the FortiAnalyzer event handler notification.
Option A is incorrect because the study guide does not describe configuring an Action on FortiAnalyzer as the required step for this FortiAnalyzer-to-FortiGate automation-stitch flow. Option B is also incorrect because playbooks are a different FortiAnalyzer automation mechanism; the question specifically refers to using the Automation Stitch option in the event handler.
NEW QUESTION # 14
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: B,D
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 15
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: A
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 16
Refer to the exhibits.
The Playbook Monitor dashboard and the analysis of the corresponding incident analysis are shown. You created the playbook with the objective of automatically attaching the report to the incident that was created.
Which two statements are correct? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are C and D .
Option D is correct because the Playbook Monitor clearly shows the starter as On_Demand and the trigger as user(admin) . The study guide states that "ON_DEMAND: The playbook runs when an administrator manually starts it" and also notes that to run it manually, you select the playbook and click Run . This exactly matches the exhibit, so the playbook was manually triggered.
Option C is also correct. The study guide explains that "tasks run one after another" and that "if needed, the output of one task can be used by the tasks that follow it." It also gives an example where workflow logic matters, such as creating an incident and then attaching details to it. In the exhibit, the sequence shown is Attach_report , then Run_report , then Create_Incident , while the incident analysis shows no report attached . Since the report must exist and the incident must already be available before it can be attached properly, the task order is wrong and must be reordered.
Option B is incorrect because the monitor shows multiple tasks completed successfully, not only Create_Incident . Option A is not the best answer because the main problem demonstrated by the exhibits is not simply waiting time, but the incorrect workflow order. The playbook completed successfully, yet the report is still not attached, which indicates a design issue in the task sequence rather than just a delay.
NEW QUESTION # 17
Refer to the exhibit.
A partial OT network is shown.
The OT network is divided into two main networks with a FortiGate device operating in NAT mode.
How can you further segment network 1 from network 2?
Answer: B
Explanation:
The correct answer is C . Fortinet VDOMs partition a physical FortiGate into multiple logical FortiGate devices, with each VDOM maintaining independent security policies, routing tables, and other configurations.
Traffic is confined to its VDOM unless explicit inter-VDOM connectivity is configured. Because the exhibit specifies that FortiGate operates in NAT mode , separate traffic VDOMs are the appropriate method for creating independent security domains for network 1 and network 2. Forward-domain IDs apply specifically to FortiGate operating in transparent mode , where interfaces otherwise share a broadcast domain, so option D does not fit this topology. An implicit software switch places interfaces in the same layer-2 broadcast domain rather than creating stronger separation. Universal ZTNA controls user access to applications and is not a replacement for structural network segmentation. Therefore, two traffic VDOMs provide the required separation.
NEW QUESTION # 18
......
Here our NSEI_OTS_AR-7.6 exam braindumps are tailor-designed for you. Unlike many other learning materials, our Fortinet NSE I - OT Security 7.6 Architect guide torrent is specially designed to help people pass the exam in a more productive and time-saving way, and such an efficient feature makes it a wonderful assistant in personal achievement as people have less spare time nowadays. On the other hand, NSEI_OTS_AR-7.6 Exam Braindumps are aimed to help users make best use of their sporadic time by adopting flexible and safe study access.
Exam NSEI_OTS_AR-7.6 Tutorials: https://www.freecram.com/Fortinet-certification/NSEI_OTS_AR-7.6-exam-dumps.html