HOT Preparation Professional-Cloud-Network-Engineer Store - High Pass-Rate Google Professional-Cloud-Network-Engineer Prepaway Dumps: Google Cloud Certified - Professional Cloud Network Engineer

BTW, DOWNLOAD part of PDFBraindumps Professional-Cloud-Network-Engineer dumps from Cloud Storage: https://drive.google.com/open?id=1W0hdYIKB_Sti3P86_xr0qB5yil87biMr

During these years, our PDF version of our Google Professional-Cloud-Network-Engineer study engine stays true to its original purpose to pursue a higher pass rate that has never been attained in the past. And you will be content about our considerate service on our Google Professional-Cloud-Network-Engineer training guide. If you have any question, you can just contact us!

Google Professional-Cloud-Network-Engineer Exam Syllabus Topics:

Section	Objectives
Topic 1: Implement hybrid connectivity	- Dedicated and partner interconnect 1. High availability design patterns 2. VLAN attachments and configuration - VPN and peering 1. HA VPN setup 2. VPC peering and Shared VPC
Topic 2: Implement virtual networks	- VPC configuration 1. Firewall rules configuration 2. Custom mode VPC setup - Load balancing and traffic management 1. Cloud DNS configuration 2. HTTP(S), TCP/SSL load balancing
Topic 3: Manage, monitor, and optimize network operations	- Security and troubleshooting 1. Firewall and security policy troubleshooting 2. Latency and connectivity diagnostics - Network monitoring and logging 1. Network Intelligence Center tools 2. Cloud Monitoring and Logging usage
Topic 4: Design and plan a Google Cloud network	- VPC design and topology planning 1. Subnet design and IP address planning 2. Regional vs global architecture considerations - Hybrid and multi-cloud architecture design 1. Interconnect and VPN planning 2. Routing strategy design (BGP)

>> Preparation Professional-Cloud-Network-Engineer Store <<

Google Professional-Cloud-Network-Engineer Prepaway Dumps - Professional-Cloud-Network-Engineer Test Labs

If you want to pass the exam in the shortest time, our study materials can help you achieve this dream. Professional-Cloud-Network-Engineer learning quiz according to your specific circumstances, for you to develop a suitable schedule and learning materials, so that you can prepare in the shortest possible time to pass the exam needs everything. If you use our Professional-Cloud-Network-Engineer training prep, you only need to spend twenty to thirty hours to practice our Professional-Cloud-Network-Engineer study materials and you are ready to take the exam.

Google Cloud Certified - Professional Cloud Network Engineer Sample Questions (Q292-Q297):

NEW QUESTION # 292
Your organization has implemented Vertex AI online prediction in your Google Cloud environment, which is in the us-central1 region. Online prediction is available through private services access by using the IP CIDR range of 172.16.53.0/24. You need to configure access to Vertex AI without affecting the existing routes. You want to use the VLAN attachments that are located in the us-west1 region as primary. The interconnect VLAN attachments in the us-west2 region can only be used as a backup. What should you do?

A. Create a custom route advertisement on VLAN attachments in the us-west1 region for prefix
172.16.53.0/24, and set the route priority on the BGP session as 100. Create a custom route advertisement on VLAN attachments in the us-west2 region for prefix 172.16.53.0/24, and set the route priority on the BGP session as 200.
B. Create a custom learned route on VLAN attachments in the us-west1 region for prefix
172.16.53.0/24, and set the route priority on the BGP session as 100. Create a custom route advertisement on VLAN attachments in the us-west2 region for prefix 172.16.53.0/24, and set the route priority on the BGP session as 200.
C. Create a custom route advertisement on VLAN attachments in the us-west1 region for prefix
172.16.53.0/24. Create a custom route advertisement on VLAN attachments in the us-west2 region for prefix 172.16.53.0/24.
D. Create a custom route advertisement on VLAN attachments in the us-west1 region for prefix
172.16.53.0/24, and create a BGP route-policy to set the multi-exit discriminator (MED) to 100.
Create a custom route advertisement on VLAN attachments in the us-west2 region for prefix
172.16.53.0/24, and create a BGP route-policy to set the multi-exit discriminator (MED) to 200.

Answer: A

Explanation:
To configure access to Vertex AI online prediction (via private services access) while designating a primary and backup region for interconnect VLAN attachments:
1. Custom route advertisements: Advertise the prefix 172.16.53.0/24 on the VLAN attachments in both us-west1 (primary) and us-west2 (backup) regions. This ensures that the prefix for private services access is known in your on-premises environment.
2. Set BGP route priority: The BGP priority determines the preferred path for traffic.
- Assign a lower priority value (e.g., 100) for the primary region (us-west1).
- Assign a higher priority value (e.g., 200) for the backup region (us-west2).
BGP always selects the route with the lowest priority value, ensuring that traffic flows through us- west1 as the primary path. If the us-west1 interconnect becomes unavailable, traffic will automatically fail over to us-west2.

NEW QUESTION # 293
Your organization is deploying a single project for 3 separate departments. Two of these departments require network connectivity between each other, but the third department should remain in isolation. Your design should create separate network administrative domains between these departments. You want to minimize operational overhead.
How should you design the topology?

A. Create 3 separate VPCs, and use VPC peering to establish connectivity between the two appropriate VPCs.
B. Create a Shared VPC Host Project and the respective Service Projects for each of the 3 separate departments.
C. Create 3 separate VPCs, and use Cloud VPN to establish connectivity between the two appropriate VPCs.
D. Create a single project, and deploy specific firewall rules. Use network tags to isolate access between the departments.
Use Shared VPC to connect to a common VPC network. Resources in those projects can communicate with each other securely and efficiently across project boundaries using internal IPs. You can manage shared network resources, such as subnets, routes, and firewalls, from a central host project, enabling you to apply and enforce consistent network policies across the projects.
With Shared VPC and IAM controls, you can separate network administration from project administration. This separation helps you implement the principle of least privilege. For example, a centralized network team can administer the network without having any permissions into the participating projects. Similarly, the project admins can manage their project resources without any permissions to manipulate the shared network.

Answer: B

NEW QUESTION # 294
Your organization deployed a mission critical application that is expected to be a new revenue source. As part of the planning and deployment process, you have recently implemented a security profile with the default set of threat signatures provided by Cloud Next Generation Firewall (Cloud NGFW). This application is the only application running on this project. You need to increase the security posture of the application to log the threat and drop the related packets.
What should you do?

A. Configure a new default threat signature with Deny All to all severity options. Review the logs to understand the impact.
B. For all severity options (critical, high, medium, low and informational) in the security profile, change the default override action to Deny.
C. Configure Cloud Scheduler to run a task that checks the Cloud NGFW logs to verify the threats.Configure the task to create a security profile with each signature ID set to override the default action.
D. Set up a Linux VM as the frontend gateway for the application. Create iptables rules to drop all packets, excluding the application port.

Answer: B

Explanation:
To enhance the security posture of your mission-critical application and ensure that threats are logged and the related packets are dropped, you need to configure the security profile in Cloud NGFW to take a more aggressive action for all detected threats:
1. Override default actions in the security profile: By changing the default action for all severity levels (critical, high, medium, low, and informational) to Deny, you ensure that any threat matching a Cloud NGFW threat signature is logged and that the associated packets are dropped.
2. Threat logging: Cloud NGFW automatically logs all detected threats, including dropped packets.
This provides visibility into potential attacks and allows you to monitor and analyze threats effectively.
This approach ensures that your application is protected from known threats while providing detailed logs for auditing and further analysis, which aligns with the organization's goal of maintaining a high-security posture for a mission-critical application.

NEW QUESTION # 295
You have the following Shared VPC design VPC Flow Logs is configured for Subnet-1 In the host VPC. You also want to monitor flow logs for Subnet-2. What should you do?

A. Configure a VPC Flow Logs filter for Subnet-2 in the host project VPC.
B. Configure a firewall rule to permit Subnet-2 IP addresses outbound in the host protect VPC.
C. Configure VPC Flow Logs in the service project VPC for Subnet-2.
D. Configure Packet Mirroring in both the host and service project VPCs.

Answer: C

Explanation:
* Understanding VPC Flow Logs:
* VPC Flow Logs is a feature that captures information about the IP traffic going to and from network interfaces in a VPC. It helps in monitoring and analyzing network traffic, ensuring security, and optimizing network performance.
* Current Configuration:
* According to the diagram, VPC Flow Logs is already configured for Subnet-1 in the host VPC.
This means that traffic information for Subnet-1 is being captured and logged.
* Requirement for Subnet-2:
* The goal is to monitor flow logs for Subnet-2, which is in the service project VPC.
* Correct Configuration for Subnet-2:
* To monitor the flow logs for Subnet-2, you need to configure VPC Flow Logs within the service project VPC where Subnet-2 resides. This is because VPC Flow Logs must be configured in the same project and VPC where the subnet is located.
* Implementation Steps:
* Go to the Google Cloud Console.
* Navigate to the service project where Subnet-2 is located.
* Select the VPC network containing Subnet-2.
* Enable VPC Flow Logs for Subnet-2 by editing the subnet settings and enabling the flow logs option.
* Cost and Performance Considerations:
* Enabling VPC Flow Logs may incur additional costs based on the volume of data logged. Ensure to review and understand the pricing implications.
* Analyze and manage the data collected to avoid unnecessary logging and costs.

NEW QUESTION # 296
You are configuring an Application Load Balancer. The backend resides in your on-premises data center and is connected by Dedicated Interconnect. You need to ensure the load balancer can reference these on-premises resources. You do not want the traffic to traverse the internet at all. What should you do?

A. Q Configure an internet network endpoint group (NEG) as a backend service as part of the load balancer. Ensure firewalls are opened for the proxy-only subnet.
B. Q Configure a Private Service Connect network endpoint group (NEG) as a backend service as part of the load balancer. Ensure firewalls are opened for the client source IPs.
C. Q Configure a hybrid network endpoint group (NEG) as a backend service as part of the load balancer.Ensure firewalls are opened for the proxy-only subnet.
D. Q Configure a zonal network endpoint group (NEG) as a backend service as part of the load balancer.
Ensure firewalls are opened for the client source IPs.

Answer: C

Explanation:
To connect an Application Load Balancer to on-premises resources via Dedicated Interconnect without traversing the internet, you must use a hybrid network endpoint group (NEG). Hybrid NEGs are specifically designed for connecting Google Cloud load balancers to on-premises or other cloud environments via hybrid connectivity solutions like Cloud Interconnect or Cloud VPN. The proxy-only subnet is essential for the load balancer's proxies to communicate with the backends.
Exact Extract:
"A hybrid NEG enables you to use an external HTTP(S) Load Balancer with backends that are outside of Google Cloud, such as your on-premises data centers or other cloud providers. This is typically used in conjunction with hybrid connectivity solutions like Cloud Interconnect or Cloud VPN."
"When using an external HTTP(S) Load Balancer with hybrid NEGs, you must configure a proxy-only subnet in the region where the load balancer is deployed. This subnet is used by the load balancer's proxies to reach your backends."Reference: Google Cloud Load Balancing Documentation - Hybrid NEG overview

NEW QUESTION # 297
......

Our services before, during and after the clients use our Professional-Cloud-Network-Engineer certification material are considerate. Before the purchase, the clients can download and try out our Professional-Cloud-Network-Engineer learning file freely. During the clients use our products they can contact our online customer service staff to consult the problems about our products. After the clients use our Professional-Cloud-Network-Engineer Prep Guide dump if they can’t pass the test smoothly they can contact us to require us to refund them in full and if only they provide the failure proof we will refund them at once. Our company gives priority to the satisfaction degree of the clients and puts the quality of the service in the first place.

Professional-Cloud-Network-Engineer Prepaway Dumps: https://www.pdfbraindumps.com/Professional-Cloud-Network-Engineer_valid-braindumps.html

P.S. Free & New Professional-Cloud-Network-Engineer dumps are available on Google Drive shared by PDFBraindumps: https://drive.google.com/open?id=1W0hdYIKB_Sti3P86_xr0qB5yil87biMr