What's more, part of that SureTorrent NSEI_OTS_AR-7.6 dumps now are free: https://drive.google.com/open?id=1PqhZx_YbD6sXJxgrciIzSQ3j7bEPUIwq
You have the option to change the topic and set the time according to the actual Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam. The Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice questions give you a feeling of a real exam which boost confidence. Practice under real Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam situations is an excellent way to learn more about the complexity of the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam dumps. You can learn from your Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice test mistakes and overcome them before the actual NSEI_OTS_AR-7.6 exam.
| Section | Objectives |
|---|---|
| Asset management | - Implement device detection on FortiGate and FortiNAC - Fortinet Security Fabric for an OT network - Explain OT standard and Fortinet compliance |
| Monitoring and risk assessment | - Perform risk assessment and management - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers |
| Network access control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
| Network security | - Configure virtual patching - Configure security inspections for industrial protocols - Configure automation |
>> Reliable NSEI_OTS_AR-7.6 Exam Simulator <<
As an experienced exam dumps provider, our website offers you most reliable Fortinet real dumps and study guide. We offer customer with most comprehensive NSEI_OTS_AR-7.6 exam pdf and the guarantee of high pass rate. The key of our success is to constantly provide the best quality NSEI_OTS_AR-7.6 Dumps Torrent with the best customer service.
NEW QUESTION # 47
You want FortiAnalyzer to trigger an automation stitch on a FortiGate device automatically. What must you configure on FortiAnalyzer to enable direct communication with FortiGate? (Choose one answer)
Answer: C
Explanation:
The verified answer is C. The Fabric settings . The study guide ties FortiAnalyzer-triggered actions to the Security Fabric relationship with FortiGate, not to playbook tasks or standalone event handlers alone. It explains that "within the Security Fabric environment, FortiAnalyzer is a key element in the creation of automation stitches" and shows the flow where a downstream FortiGate sends logs to FortiAnalyzer, then FortiAnalyzer parses the logs and notifies the root FortiGate , after which the root FortiGate triggers the action . This shows that FortiAnalyzer must be configured so it can communicate with FortiGate through the Security Fabric.
The guide also states that FortiAnalyzer is the foundation of the Security Fabric , providing logging, reporting, analytics, and automation for Fabric devices and endpoints. It further explains that the FortiAnalyzer Fabric connector consolidates the traffic logs within the Security Fabric. This confirms that the automation workflow depends on proper Security Fabric integration. A playbook task is used for automated SOC actions, and an event handler is used to generate events from logs, but neither one alone establishes the direct communication path needed between FortiAnalyzer and FortiGate. Therefore, the required configuration on FortiAnalyzer is the Fabric settings .
NEW QUESTION # 48
As the first step in your OT network protection plan, you must identify the OT protocols that the FortiGate device supports. Which two configurations must you implement on this FortiGate device? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are B and C . The study guide states that "You can use application control signatures to detect OT protocols" and that "Application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" . It also shows that a Modbus application control profile can be enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly supports B , because application control is the feature used to identify and monitor OT protocols on FortiGate.
The guide also explains under IPS that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI" using config ips global and set exclude-signatures none .
Once enabled, FortiGate can use those OT signatures for OT-aware inspection and protection. That supports C as the second required configuration. A is related to device discovery, not protocol identification, and D is focused on exploit and vulnerability detection rather than the first-step goal of identifying OT protocols.
NEW QUESTION # 49
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: A,C
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 50
Refer to the exhibit.
You have configured event handlers on FortiAnalyzer to monitor your OT network.
Based on the partial Event Monitor page shown in the exhibit, which statement is correct?
Answer: B
Explanation:
The correct answer is D . The exhibit shows the IPS event with the status Mitigated . Fortinet defines a Mitigated event as one where the security risk has been blocked or dropped ; an IPS log whose action is block or drop is the explicit example given in the OT Security 7.6 study guide. A Contained status instead indicates that the risk source has been isolated, such as an antivirus quarantine action. An Unhandled status indicates that the risk remains open-for example, an IPS event where the action is pass. The Web.Client application-control entry in the exhibit has a blank status, so it cannot correctly be described as either Unhandled or Contained based solely on the displayed information. Therefore, the definitive conclusion from the Event Monitor is that the corresponding IPS action was block or drop .
NEW QUESTION # 51
Refer to the exhibit.
A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer . When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer: B,C
Explanation:
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:
* Automation Stitch and Reports : Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.
* Auto-cache Requirement (Answer C) : For a report to be used for automated generation, it must be " ready " to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.
* Extended Log Filtering (Answer B) : Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an " automation-compatible " report in the Playbook interface, Extended Log Filtering must be enabled.
* Workflow Constraints : Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report ' s successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
NEW QUESTION # 52
......
There may be a lot of people feel that the preparation process for NSEI_OTS_AR-7.6 exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. Today, our NSEI_OTS_AR-7.6 Exam Materials will radically change this. High question hit rate makes you no longer aimless when preparing for the exam, so you just should review according to the content of our NSEI_OTS_AR-7.6 study guide prepared for you.
100% NSEI_OTS_AR-7.6 Correct Answers: https://www.suretorrent.com/NSEI_OTS_AR-7.6-exam-guide-torrent.html
P.S. Free & New NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by SureTorrent: https://drive.google.com/open?id=1PqhZx_YbD6sXJxgrciIzSQ3j7bEPUIwq