What's more, part of that Prep4sureGuide F5CAB2 dumps now are free: https://drive.google.com/open?id=1RsouP7Bu3Yu8k8LJKEN8puHK48NVG4Ho
Our F5CAB2 exam questions are related to test standards and are made in the form of actual tests. Whether you are newbie or experienced exam candidates, our F5CAB2 study guide will relieve you of tremendous pressure and help you conquer the difficulties with efficiency. If you study with our F5CAB2 Practice Engine for 20 to 30 hours, we can claim that you can pass the exam as easy as a pie. Why not have a try?
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
One can instantly download actual F5CAB2 exam questions after buying them from us. Free demos and up to 1 year of free updates are also available at Prep4sureGuide. Buy BIG-IP Administration Data Plane Concepts (F5CAB2) (F5CAB2) practice material now and earn the BIG-IP Administration Data Plane Concepts (F5CAB2) (F5CAB2) certification exam of your dreams with us!
NEW QUESTION # 27
What type of virtual server should be used to load balance UDP traffic without considering previous connections?
Answer: C
Explanation:
When handling high-volume UDP traffic where the BIG-IP does not need to maintain any session history or relationship between packets, a Stateless virtual server is the appropriate choice.
No Connection Tracking: A stateless virtual server does not create or maintain entries in the BIG-IP connection table. This means the system processes each packet as an individual event, without "considering previous connections" or packets from the same source.
High Performance: Because the system bypasses the overhead of state management, stateless virtual servers provide the highest possible throughput for UDP and ICMP traffic.
Use Cases: This is ideal for services like DNS (stateless queries) or some types of syslog traffic where each packet is independent and doesn't require the persistence or protocol inspection typically provided by a full-proxy.
Why other options are incorrect:
Forwarding: While a Forwarding (IP) virtual server can handle UDP, it still maintains a state entry in the connection table to ensure return traffic is handled correctly.
Standard: This is a full-proxy virtual server. It is inherently stateful and requires a connection table entry for every flow it manages.
Reject: This is a special virtual server type that simply drops incoming traffic and, in the case of TCP, sends a reset (RST) or, for UDP, sends an ICMP unreachable message. It is not a load balancing type.
NEW QUESTION # 28
Which of the following lists the order of preference from most preferred to least preferred when BIG-IP processes and selects a virtual server? (Choose one answer)
Answer: C
Explanation:
The BIG-IP system uses a specific precedence algorithm to determine which virtual server (listener) should process an incoming packet when multiple virtual servers might match the criteria. Since BIG-IP version
11.3.0, the system evaluates three primary factors in a fixed order of importance:
* Destination Address: The system first looks for the most specific destination match. A "Host" address (mask /32) is preferred over a "Network" address (mask /24, /16, etc.), which is preferred over a
"Wildcard" (0.0.0.0/0).
* Source Address: If multiple virtual servers have identical destination masks, the system then evaluates the source address criteria. Again, a specific source host match is preferred over a source network or a wildcard source.
* Service Port: Finally, if both destination and source specifications are equal, the system checks the port. A specific port match (e.g., 80) is preferred over a wildcard port (e.g., or 0).
Following this logic, a virtual server configured with a specific destination host, a specific source host, and a specific service port represents the highest level of specificity and thus the highest preference.
NEW QUESTION # 29
Refer to the exhibit.
During a planned upgrade to a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby. Reverting the failover resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next failover event? (Choose one answer)
Answer: D
Explanation:
In anActive/StandbyBIG-IP design, application availability during failover depends on both units having equivalent data-plane connectivityfor the networks that carry application traffic. Specifically:
* VLANs are bound to specific interfaces (and optionally VLAN tags).
* Floating self IPs / traffic groupsmove to the new Active device during failover.
* For traffic to continue flowing after failover, the new Active device must have thesame VLANs available on the correct interfacesthat connect to the upstream/downstream networks.
What the symptom tells you:
* Traffic works when Device A is Active
* Traffic fails when Device B becomes Active
* Failback immediately restores traffic
This pattern strongly indicates theStandby unit does not have the VLAN connected the same way(wrong physical interface assignment), so when it becomes Active, it owns the floating addresses but cannot actually pass traffic on the correct network segment.
WhyInterface mismatchis the best match:
* If theActiveunit is already working, its interface mapping is correct.
* The fix is to make theStandbyunit's VLAN/interface assignment match the Active unit.
* That corresponds tochanging the Standby device interface to 1.1.
Why theTagoptions are less likely here (given the choices and the exhibit intent):
* Tag issues can also break failover traffic, but the question/options are clearly driving toward the classic HA requirement:consistent VLAN-to-interface mapping on both devicesso the data plane remains functional after the traffic group moves.
Conclusion:To avoid an outage on the next failover, the BIG-IP Administrator must ensure the Standby device uses thesame interface (1.1)for the relevant VLAN(s) that carry the application traffic, so when it becomes Active it can forward/receive traffic normally.
NEW QUESTION # 30
What type of virtual server should be used to load balance UDP traffic without considering previous connections?
Answer: C
Explanation:
When handling high-volume UDP traffic where the BIG-IP does not need to maintain any session history or relationship between packets, aStatelessvirtual server is the appropriate choice.
* No Connection Tracking:A stateless virtual server does not create or maintain entries in the BIG-IP connection table. This means the system processes each packet as an individual event, without
"considering previous connections" or packets from the same source.
* High Performance:Because the system bypasses the overhead of state management, stateless virtual servers provide the highest possible throughput for UDP and ICMP traffic.
* Use Cases:This is ideal for services like DNS (stateless queries) or some types of syslog traffic where each packet is independent and doesn't require the persistence or protocol inspection typically provided by a full-proxy.
Why other options are incorrect:
* Forwarding:While a Forwarding (IP) virtual server can handle UDP, it still maintains a state entry in the connection table to ensure return traffic is handled correctly.
* Standard:This is a full-proxy virtual server. It is inherently stateful and requires a connection table entry for every flow it manages.
* Reject:This is a special virtual server type that simply drops incoming traffic and, in the case of TCP, sends a reset (RST) or, for UDP, sends an ICMP unreachable message. It is not a load balancing type.
NEW QUESTION # 31
A standard virtual server has been associated with a pool with multiple members. Assuming all other settings are left at their defaults, which statement is always true concerning traffic processed by the virtual server?
Answer: D
Explanation:
Understanding the default behavior of a Standard Virtual Server regarding address and port translation is fundamental to BIG-IP administration.
Source Address Translation (SNAT): By default, the BIG-IP system does not perform Source Address Translation (SNAT). This means that the packet's source IP address (the Client IP) remains preserved as it passes through the BIG-IP to the pool member. This is critical for backend servers to identify the original client for logging and security purposes. Therefore, the client IP address is unchanged between the client-side and server-side connections.
Destination Address Translation (DAT): By default, a Standard Virtual Server always performs Destination Address Translation. The BIG-IP system changes the destination IP from the Virtual Server's IP address to the IP address of the specific Pool Member selected by the load balancing algorithm. Consequently, the server-side destination IP is different from the client-side destination IP.
Port Translation: By default, Port Translation is enabled. If a Virtual Server is listening on port 80 and the selected pool member is configured for port 8080, the BIG-IP will translate the destination port. Even if the ports happen to be the same, the setting allows for change, whereas the default SNAT setting (None) ensures the client IP remains static.
NEW QUESTION # 32
......
The 24/7 support team is just an e-mail away for our customers so that they can contact us anytime. Our team will solve all of their issues as quickly as possible. Free demos and up to 1 year of free updates of our F5 Exams are also available at Prep4sureGuide. Buy updated and Real F5CAB2 Exam Questions now and earn your dream F5CAB2 certification with Prep4sureGuide!
Questions F5CAB2 Exam: https://www.prep4sureguide.com/F5CAB2-prep4sure-exam-guide.html
DOWNLOAD the newest Prep4sureGuide F5CAB2 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1RsouP7Bu3Yu8k8LJKEN8puHK48NVG4Ho