The Designing Cisco Wireless Networks 300-110 exam dumps are top-rated and real Designing Cisco Wireless Networks 300-110 practice questions that will enable you to pass the final Designing Cisco Wireless Networks 300-110 exam easily. With the Designing Cisco Wireless Networks Exam Questions you can make this task simple, quick, and instant. Using the Designing Cisco Wireless Networks 300-110 can help you success in your exam. Test4Sure offers reliable guide files and reliable exam guide materials for 365 days free updates.
| Section | Weight | Objectives |
|---|---|---|
| Mobility Design | 25% | - Mobility architecture models
|
| WLAN High Availability and Security Design | 20% | - High availability design
|
| Wireless Infrastructure Design | 30% | - High-density wireless design
|
| Wireless Site Survey | 25% | - Layer 1 site survey execution and analysis - RF propagation and attenuation analysis - Design requirements collection and constraint evaluation
|
If you choose to buy the Test4Sure's raining plan, we can make ensure you to 100% pass your first time to attend Cisco Certification 300-110 Exam. If you fail the exam, we will give a full refund to you.
NEW QUESTION # 62
An engineer must perform a predictive design for a wireless network.
The customer has devices that can tolerate at most 100 ms of delay when roaming. Which design criteria must be used?
Answer: B
Explanation:
Devices that can tolerate at most 100 ms of delay when roaming are voice devices. The 100 ms maximum roaming delay threshold is the Cisco-specified design criterion for VoWLAN implementations -- it defines the maximum time a handset can tolerate being disconnected from the wireless network during a roam event before the voice call is degraded or dropped. This threshold drives specific design requirements: 15-20% cell overlap at -67 dBm, fast roaming mechanisms (802.11r, CCKM, or OKC), and AP placement along user movement paths.
NEW QUESTION # 63
A retail customer opened two new branch locations, and the main store HQ handles data center operations.
Each branch location has three Cisco Catalyst 9130 APs. The data center has a Catalyst 9800 WLC with 18 Catalyst 9130 APs. Growing business and poor WAN uplinks cause impacted branch AP and wireless client connectivity back to HQ, and each branch location is now planned to have its own EWC controller based on C9130 AP to keep traffic local. This new design must accommodate: guests and employees sharing the same WLAN with different VLANs, guest uplink and downlink traffic restricted to 2 Mbps, and each branch acting as secondary or tertiary backup to another branch with the data center WLC always being the primary. Which design approach should the consulting engineer take?
Answer: A
Explanation:
This multi-constraint design scenario requires precise alignment of EWC architecture, N+1 redundancy hierarchy, AAA integration, and WLAN security policies. Option B correctly addresses all requirements.
With only three APs per branch and a requirement to keep traffic local, converting a single C9130 to EWC mode is the correct and resource-efficient approach - converting two APs to EWC (Options A and C) wastes AP capacity in a small three-AP branch. The preferred controller set to the EWC AP ensures local APs join locally. The HQ WLC as primary N+1 backup satisfies the data center WLC always being primary requirement. Other branches ' EWC APs configured as secondary and tertiary controllers creates the cross- branch redundancy hierarchy. Since guests and employees share the same SSID but require different VLANs, MAC Authentication Bypass (MAB) with AAA override allows the HQ ISE/AAA server to return VLAN attributes based on device or user identity - dynamically assigning the correct VLAN at the policy level. The
2 Mbps guest rate limiting is applied through per-client QoS policies on the EWC. Option D ' s use of local web auth for guests does not enable dynamic VLAN assignment from AAA. Reference: WLSD Study Guide
- EWC Architecture, N+1 Redundancy Hierarchy, AAA Override and Dynamic VLAN Assignment.
NEW QUESTION # 64
An enterprise is using two wireless controllers to support the wireless network. The data centre is located in the head office. Each controller has a corporate WLAN configured with different SSID names. The APs are installed using a round-robin approach to load balance the traffic. What should be changed in the configuration to optimize roaming?
Answer: B
Explanation:
To optimize roaming in a wireless network with multiple controllers, it is essential to use the same WLAN name (SSID) across all controllers. When SSIDs differ between controllers, clients perceive them as different networks and must perform a full re-association and re-authentication when roaming between APs managed by different controllers. This causes a roaming disruption equivalent to connecting to an entirely new network. By using identical SSID names on both controllers, clients can seamlessly roam between APs on different controllers within the same mobility group - the controllers exchange client state information via the mobility tunnel, enabling seamless handoff. In the scenario described, ' Copr-NET390595865WLC-1 ' and
' Copr-NET6837l638WLC-2 ' are different SSIDs, meaning clients cannot roam transparently between them.
Making both controllers broadcast the same SSID name (and using a mobility group to connect the controllers) resolves this. Reference: WLSD Study Guide - SSID Consistency Across Controllers, Inter- Controller Roaming, Mobility Group Configuration.
NEW QUESTION # 65
A university wants to deploy a high density of APs in an area where a high number of users congregate. Which functionality allows the university to optimize the RF settings for APs that operate in different environments or coverage zones?
Answer: D
Explanation:
RF Profiles are a Cisco WLC configuration construct that allows administrators to define a customized set of Radio Resource Management (RRM) parameters and apply them to a subset of APs operating in a specific environment or coverage zone. Within a university high-density deployment -- where a lecture hall, outdoor quad, cafeteria, and library may each require fundamentally different RF settings -- RF Profiles enable differentiation without globally modifying all RRM parameters. An RF Profile can define custom values for: minimum mandatory data rates, maximum transmit power, minimum transmit power, channel width (20/40/80 MHz), RxSOP thresholds, client load balancing parameters, and coverage hole detection sensitivity. This allows the engineer to apply aggressive interference mitigation settings to high-density assembly areas while maintaining full-coverage settings for perimeter zones.
NEW QUESTION # 66
An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of -72 dBm. Clients report frequent disconnections. What must be configured for the AP to guide the client to a better AP?
Answer: C
Explanation:
The scenario presents a critical distinction in where Cisco WLC features are configured.
Optimized roaming on Cisco WLC is a radio-level feature that monitors connected client RSSI and, when a client's signal falls below the configured threshold (-72 dBm), triggers a disassociation to force the client to reconnect to a stronger AP. However, without a mechanism to guide the client proactively before reaching the threshold, clients that disassociate simply reconnect to whatever AP their device selects, potentially causing the reported frequent disconnections. BSS Transition Management (802.11v) is configured at the SSID level and provides the complementary mechanism: before the client reaches the RSSI threshold, the AP sends a BSS Transition Management Request pointing the client toward a specific target AP with stronger signal. The correct architecture requires: optimized roaming configured at the radio level (triggering disconnection when RSSI falls too low) combined with BSS transition enabled at the SSID level (guiding the client to a better AP before forced disconnection).
NEW QUESTION # 67
......
In order to provide users with the most abundant 300-110 learning materials, our company has collected a large amount of information. And set up a professional team to analyze this information. So our 300-110 study questions contain absolutely all the information you need. At the same time, not only you will find the full information in our 300-110 Practice Guide, but also you can discover that the information is the latest and our 300-110 exam braindumps can help you pass the exam for sure just by the first attempt.
300-110 Valid Exam Dumps: https://www.test4sure.com/300-110-pass4sure-vce.html