P.S. Free & New NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by Exam4Free: https://drive.google.com/open?id=19AZIudqhudKXeU7HbejeOiDQ_QlMUrXB
When you choose NSE5_FSW_AD-7.6 valid study pdf, you will get a chance to participate in the simulated exam before you take your actual test. The contents of NSE5_FSW_AD-7.6 exam torrent are compiled by our experts through several times of verification and confirmation. So the NSE5_FSW_AD-7.6 questions & answers are valid and reliable to use. You can find all the key points in the NSE5_FSW_AD-7.6 practice torrent. Besides, the NSE5_FSW_AD-7.6 test engine training equipped with various self-assessment functions like exam history, result scores and time setting, etc.
| Section | Objectives |
|---|---|
| Layer 2 control and security | - Use ACLs, security profiles, and VLAN security mechanisms on FortiSwitch - Use port security options on FortiSwitch - Use filtering and antispoofing techniques on FortiSwitch |
| Monitoring and troubleshooting | - Interpret system logs, monitor port statistics, and diagnose connectivity issues - Use tools to view and extract network information from FortiSwitch - Use packet capturing methods to monitor and troubleshoot traffic issues - Troubleshoot FortiLink issues |
| Deployment and management | - Configure and provision FortiSwitch - Deploy and configure FortiSwitch in a multi-tenancy environment - Deploy FortiSwitch supported deployment topologies |
| FortiSwitch concepts | - Configure the ports required for stack deployment - Configure switch ports, split port, and available transceivers - Configure switching and routing on FortiSwitch - Configure STP to prevent network loops - Use QoS and LLDP-MED on FortiSwitch - Configure VLANs using FortiSwitch |
>> Latest NSE5_FSW_AD-7.6 Exam Tips <<
Do you want to pass NSE5_FSW_AD-7.6 certification exam easily? Then it is necessary to have Exam4Free NSE5_FSW_AD-7.6 exam certification training materials. Exam4Free NSE5_FSW_AD-7.6 test training materials are summarized by IT experts with constant practice, which is the combination of NSE5_FSW_AD-7.6 Exam Dumps and answers, and can't be matched by any NSE5_FSW_AD-7.6 test training materials from others. Exam4Free will take you to a more beautiful future.
NEW QUESTION # 40
What does the switchauto-networksetting control on FortiSwitch? (Choose one answer)
Answer: B
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the auto- network setting (configured via config switch auto-network) is a global feature introduced to simplify the initial deployment of switches. Starting inFortiSwitchOS 7.2.0and continuing through7.6, this feature is enabled by defaulton all new and factory-reset units.1 The primary function of theauto-networksetting is to facilitate theautomatic discovery of the FortiGate and the establishment of the FortiLink interface (Option B). When enabled, the switch automatically scans its physical ports to detect a management entity, such as a FortiGate controller. This "zero-touch" discovery mechanism allows the switch to identify the correct uplink ports and automatically configure them as members of theFortiLinkfabric without manual CLI or GUI intervention.
Furthermore, the documentation notes that auto-network also managesauto-topology, which allows two switches to automatically form anInter-Switch Link (ISL)trunk between them.2This includes setting the management VLAN (typically VLAN 4094) and ensuring that DHCP snooping is trusted on these discovered links.3If an administrator intends to use the switch in a strictly standalone mode without any auto-discovery or FortiLink features, the documentation specifies that they must manually disable the auto-network status and the auto-fortilink-discovery global settings to prevent the switch from attempting to join a managed fabric.
4
Regarding other options:Option Arefers to Dynamic Port Policy or NAC features.Option Cis a standard STP configuration unrelated to the auto-network discovery suite.Option Dis a broader management capability that depends on successful network discovery but is not the specific control point for the auto-network setting.
NEW QUESTION # 41
Refer to the exhibits.
Three FortiSwitch devices in standalone mode are interconnected. The CLI command diagnose stp instance list is executed on Core-2. Based on the output shown in the exhibit, what can you conclude about Core-2?
(Choose one answer)
Answer: A
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the output of the diagnose stp instance list command provides critical information about the Spanning Tree Protocol (STP) state of a switch within a given instance. In the provided exhibit, the output forInstance ID 0 (CST)onCore-
2shows several key indicators of its role and connectivity within the STP topology.
First, the output explicitly identifies aRootbridge with MAC address 02090f000701 and a priority of 4096.
Core-2 itself has a MAC address of 02090f000702 and a priority of 32768. Because Core-2 knows the MAC address and priority of the Root bridge, it must have received this information viaBridge Protocol Data Units (BPDUs). Furthermore, the port table shows thatport3on Core-2 has been assigned the role ofROOTand is in theFORWARDINGstate. In STP/RSTP, a Root Port is the port on a non-root switch that has the lowest path cost to the root bridge. To elect a Root Port and maintain its state, the switch must continuously receive BPDUs from the root bridge (or a bridge closer to the root) on that port.
Option B is incorrect because Core-2 has aRoot Port, which is only present on non-root bridges. Option C is incorrect because ports 1, 2, 4, 5, and the internal port are all in theFORWARDINGstate. Option D is incorrect as the output does not show any ports in anALTERNATErole; all active ports are either ROOT or DESIGNATED. Therefore, the most accurate conclusion is that Core-2 has successfully received BPDUs to identify the root and determine its own port roles.
NEW QUESTION # 42
(Full question statement start from here)
Refer to the exhibits.
You enable Dynamic Host Configuration Protocol (DHCP) snooping on the VLAN,Student. The Linux- Client VM sends DHCP requests, and tcpdump confirms the broadcasts. However, the Linux-Server VM, acting as a DHCP server, receives no DHCP traffic. What is the most likely cause of this intra-VLAN traffic being blocked? (Choose one answer)
Answer: D
Explanation:
In FortiSwitchOS 7.6,DHCP snoopingis a Layer 2 security feature that validates DHCP traffic and protects the LAN from rogue DHCP servers. The feature enforces atrust modelon switch ports: ports connected toward legitimate DHCP server infrastructure must be markedtrusted, while edge/access ports facing clients are typicallyuntrusted. When DHCP snooping is enabled on a VLAN (in this case,Student), FortiSwitch inspects DHCP messages and applies filtering rules based on port trust status.
From the exhibit, bothport1(connected to the Linux-Server DHCP server) andport4(connected to the Linux- Client) showDHCP Snooping: Untrusted. In this configuration, the switch treats the DHCP server-facing port as untrusted and, by design, willblock DHCP server-originated messages(such as DHCPOFFER
/DHCPACK) arriving on that interface. This prevents the DHCP handshake from completing and effectively stops DHCP from functioning across that VLAN segment. Operationally, this is commonly observed as "no DHCP traffic" at the server/application layer because the exchange cannot progress normally when the server side is not trusted.
Option C is incorrect because the client-facing port is expected to be untrusted. Options A and D do not align with the exhibit: the ports are already placed in the Student VLAN as native VLAN, so the primary issue is the DHCP snooping trust role.
Therefore, the most likely cause is thatport1 is configured as an untrusted port(it must be trusted for a DHCP server), makingBthe correct answer.
NEW QUESTION # 43
Which two statements about the FortiLink authorization process are true? (Choose two.)
Answer: A,D
Explanation:
The FortiLink authorization process is an integral part of setting up FortiSwitch to be managed by FortiGate.
The correct statements regarding the FortiLink authorization process are:
C).A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization.This is a part of the FortiLink protocol, where FortiGate communicates with the connected FortiSwitch to establish management and control. This frame initiates the configuration and management process, allowing FortiGate to effectively control the switch.
D).FortiLink authorization sets the FortiSwitch management mode to FortiLink.Once authorized, the management mode of FortiSwitch is set to FortiLink, indicating that it is being managed via a FortiLink connection from a FortiGate appliance. This changes the operational mode of the switch to be under the control of the FortiGate for centralized management and policy application.
References:
Further details on the FortiLink setup and authorization process can be accessed through the FortiGate configuration guides available on theFortinet Documentation site.
NEW QUESTION # 44
(Full question statement start from here)
Refer to the exhibit.
You run the command diagnose switch-controller switch-info loopguard access-1 and see that theMAC- Movecolumn displays a value of0forport1.
What does this indicate? (Choose one answer)
Answer: A
Explanation:
In FortiSwitchOS 7.6,Loop Guardis a Layer 2 loop detection mechanism primarily designed to protect access ports from unintended network loops. In itsoriginal implementation, Loop Guard only detected loops on thenative VLAN, which limited its effectiveness in environments using multiple tagged VLANs. To address this limitation, Fortinet enhanced Loop Guard by introducing theMAC move detection feature, as documented in the FortiSwitchOS 7.6 Administrator Guide.
TheMAC move optioninstructs the FortiSwitch to monitor for repeated MAC address flapping events across ports or VLANs. Such MAC movement is a strong indicator of a Layer 2 loop. However, this enhanced detection mechanism isdisabled by defaultand must be explicitly enabled by configuring aMAC move threshold greater than zero.
According to the FortiSwitchOS 7.6 Administrator Guide (page 164), enabling MAC move allows Loop Guard to detect loops beyond the native VLAN. Furthermore, the guide explicitly states (page 166) thata MAC-Move value of 0 indicates that the MAC move feature is not enabled. This means the switch is not monitoring MAC address movement as part of its loop detection logic, even though Loop Guard itself may still be enabled on the port.
Therefore, a MAC-Move value of 0 does not indicate that Loop Guard is disabled or inactive, nor does it imply VLAN-wide port shutdown behavior. It strictly confirms thatMAC move detection has not been enabled, makingOption Cthe correct and fully verified answer based on FortiSwitchOS 7.6 documentation.
NEW QUESTION # 45
......
If you buy NSE5_FSW_AD-7.6 study materials, you will get more than just a question bank. You will also get our meticulous after-sales service. The purpose of the NSE5_FSW_AD-7.6 study materials’ team is not to sell the materials, but to allow all customers who have purchased NSE5_FSW_AD-7.6 study materials to pass the exam smoothly. The trust and praise of the customers is what we most want. We will accompany you throughout the review process from the moment you buy NSE5_FSW_AD-7.6 Study Materials. We will provide you with 24 hours of free online services.
Exam NSE5_FSW_AD-7.6 Sample: https://www.exam4free.com/NSE5_FSW_AD-7.6-valid-dumps.html
What's more, part of that Exam4Free NSE5_FSW_AD-7.6 dumps now are free: https://drive.google.com/open?id=19AZIudqhudKXeU7HbejeOiDQ_QlMUrXB