P.S. Free & New HPE6-A85 dumps are available on Google Drive shared by RealVCE: https://drive.google.com/open?id=1-GUI1GFwFVyLVoyO6h0OrJSzTFOCng9Z
HP HPE6-A85 exam certification is widely recognized IT certifications. People around the world prefer HPE6-A85 exam certification to make their careers more strengthened and successful. Speaking of HP HPE6-A85 exam, RealVCE HP HPE6-A85 exam training materials have been ahead of other sites. Because RealVCE has a strong IT elite team, they always follow the latest HP HPE6-A85 Exam Training materials, with their professional mind to focus on HP HPE6-A85 exam training materials.
HP HPE6-A85 (Aruba Campus Access Associate) Exam is a certification exam designed for IT professionals who want to prove their skills and knowledge in designing, implementing, and managing Aruba wireless networks in a campus environment. This industry-recognized certification is offered by Hewlett Packard Enterprise (HPE), one of the leading providers of IT products and solutions worldwide.
>> HP HPE6-A85 Certification <<
The HPE6-A85 prep torrent we provide will cost you less time and energy. You only need relatively little time to review and prepare. After all, many people who prepare for the HPE6-A85 exam, either the office workers or the students, are all busy. But the HPE6-A85 test prep we provide are compiled elaborately and it makes you use less time and energy to learn and provide the HPE6-A85 Study Materials of high quality and seizes the focus the HPE6-A85 exam. It lets you master the most information and costs you the least time and energy.
HPE6-A85 (Aruba Campus Access Associate) certification exam is designed for those who want to validate their knowledge and skills in configuring and managing Aruba campus wireless and wired networks. Aruba Certified Campus Access Associate Exam certification is offered by Hewlett Packard Enterprise (HPE) and is a valuable credential for IT professionals seeking to advance their career in network administration.
NEW QUESTION # 41
You need to configure wireless access for several classes of loT devices, some of which operate only with 802
11b. Each class must have a unique PSK and will require a different security policy applied as a role There will be 15-20 different classes of devices and performance should be optimized Which option fulfills these requirements''
Answer: B
Explanation:
For configuring wireless access for multiple classes of IoT devices with varying security requirements, using a single SSID with Multiple Pre-Shared Keys (MPSK) is an efficient solution. MPSK allows different devices or groups of devices to connect to the same SSID but with unique PSKs, facilitating unique security policies for each class. Given that some IoT devices only support 802.11b, which operates in the 2.4GHz band, it is essential to include the 2.4GHz band in the configuration. The 5GHz band should also be included to support devices capable of operating in that band and to optimize network performance. The 6GHz band (option A) is not suitable since 802.11b devices are not compatible with it. Individual SSIDs for each IoT class (options C and D) would unnecessarily complicate network management and SSID overhead.
NEW QUESTION # 42
Match the phase of message processing with the Open Systems interconnection (OSl) layer.
Answer:
Explanation:
Explanation:
In the OSI model, data is handled differently at each layer. Here is the correct matching of the phase of message processing with the OSI layer:
Physical Layer: Organizes the data into bits.
Data Link Layer: Organizes the data into frames.
Network Layer: Organizes the data into packets.
Transport Layer: Organizes the data into segments.
The Physical Layer is responsible for the transmission of raw bits over a physical medium. The Data Link Layer encapsulates packets into frames with MAC addresses for node-to-node communication. The Network Layer is responsible for packet forwarding including routing through intermediate routers. The Transport Layer provides reliable data transfer services to the upper layers and handles the segmentation and reassembly of data.
NEW QUESTION # 43
Drag and Drop Question
Match the Open Systems Interconnection (OSI) layer with its function.
Answer:
Explanation:
NEW QUESTION # 44
Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln- band management using an SVl is being used?
Answer: B
Explanation:
The command that is used to set a default route to 10.4.5.1 on an Aruba CX switch when in-band management using an SVI is being used is ip route 0.0.0.0/0 10.4.5.1. This command specifies the destination network address (0.0.0.0) and prefix length (/0) and the next-hop address (10.4.5.1) for reaching any network that is not directly connected to the switch. The default route applies to the default VRF Virtual Routing and Forwarding. VRF is a technology that allows multiple instances of a routing table to co-exist within the same router at the same time. VRFs are typically used to segment network traffic for security, privacy, or administrative purposes., which is used for in-band management traffic that goes through an SVI Switch Virtual Interface. SVI is a virtual interface on a switch that allows the switch to route packets between different VLANs on the same switch or different switches that are connected by a trunk link. An SVI is associated with a VLAN and has an IP address and subnet mask assigned to it.
NEW QUESTION # 45
You have been asked to onboard a new Aruba 6300M in a customer deployment You are working remotely rather than on-site You have a colleague installing the switch The colleague has provided you with a remote console session to configure the edge switch You have been asked to configure a link aggregation going back to the cores using interfaces 1/1/51 and 1/1/52 The Senior Engineer of the project has asked you to configure the switch and 1Q uplink with these guidelines
1. Add VLAN 20 to the local VLAN database with name Mgmt
2. Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet 3. Add LAG 1 using LACP mode active for the uplink
4 use vlan 20 as the native vlan on the LAG 5. Make sure the interfaces are all ON.
Which configuration script will achieve the task?
Answer: A
Explanation:
Explanation
This configuration script will achieve the task as it follows the guidelines given by the Senior Engineer. It creates VLAN 20 with name Mgmt, adds L3 SVI on VLAN 20 with IP address 10.1.1.10/24, creates LAG 1 with LACP mode active for the uplink, uses VLAN 20 as the native VLAN on the LAG, and ensures that the interfaces are all ON.
References:https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6790/GUID-8F0E7E8B-0F4
NEW QUESTION # 46
......
HPE6-A85 Practice Test Fee: https://www.realvce.com/HPE6-A85_free-dumps.html
P.S. Free & New HPE6-A85 dumps are available on Google Drive shared by RealVCE: https://drive.google.com/open?id=1-GUI1GFwFVyLVoyO6h0OrJSzTFOCng9Z