Latest NSEI_OTS_AR-7.6 Real Test - New NSEI_OTS_AR-7.6 Dumps

Maybe you are busy with working every day without the help of our NSEI_OTS_AR-7.6 learning materials. The heavy work leaves you with no time to attend to study. It doesn't matter. Our NSEI_OTS_AR-7.6 learning materials can help you squeeze your time out and allow you to improve your knowledge and skills while having work experience. And there are three versions of our NSEI_OTS_AR-7.6 Exam Questions for you to choose according to your interests and hobbies.

Fortinet NSEI_OTS_AR-7.6 Exam Syllabus Topics:

SectionObjectives
Monitoring and risk assessment- Analyze security reports from FortiAnalyzer
- Perform risk assessment and management
- Create FortiAnalyzer event handlers
Network security- Configure security inspections for industrial protocols
- Configure automation
- Configure virtual patching
Network access control- Configure network segmentation schemas
- Explain OT Ethernet concepts
- Configure network access authentication
Asset management- Fortinet Security Fabric for an OT network
- Implement device detection on FortiGate and FortiNAC
- Explain OT standard and Fortinet compliance

>> Latest NSEI_OTS_AR-7.6 Real Test <<

New NSEI_OTS_AR-7.6 Dumps | Valid Test NSEI_OTS_AR-7.6 Tips

Our NSEI_OTS_AR-7.6 test braindumps can help you improve your abilities. Once you choose our learning materials, your dream that you have always been eager to get NSEI_OTS_AR-7.6 certification which can prove your abilities will realized. You will have more competitive advantages than others to find a job that is decent. We are convinced that our NSEI_OTS_AR-7.6 Exam Questions can help you gain the desired social status and thus embrace success. When you start learning, you will find a lot of small buttons, which are designed carefully. You can choose different ways of operation according to your learning habits to help you learn effectively.

Fortinet NSE I - OT Security 7.6 Architect Sample Questions (Q47-Q52):

NEW QUESTION # 47
Refer to the exhibit.

A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)

Answer: B,C

Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .


NEW QUESTION # 48
Refer to the exhibit.

A partial Incident Analysis page is shown. How was the 360-Degree Security Review OT report attached to the incident? (Choose one answer)

Answer: B

Explanation:
The study guide says playbooks are used to automate tasks such as running reports and creating/updating incidents . It also says that after a playbook is triggered, it flows through its configured tasks.
It further shows a sample playbook sequence where an event is detected, an incident is created , a report runs , and details are attached to the incident . That is exactly the kind of workflow shown in the incident analysis view.
By contrast, the study guide says event handlers generate events when logs match configured rules. Event handlers are for detection, not for attaching reports to incidents.


NEW QUESTION # 49
Refer to the exhibit.

A basic event handler is shown. You have enabled Automation Stitch to automate the handling of an alert.
Which two steps must you take to use this automation stitch? (Choose two answers)

Answer: B,C

Explanation:
The correct answers are C and D .
Option D is correct because the study guide states that the configuration of an event handler can include
"Rules" and explains that "Rules are granular conditions" and "Event handlers can have one or more rules." It further states that "FortiAnalyzer uses event handlers to filter all incoming logs" and "If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Therefore, to use the automation stitch, you must define the rules on FortiAnalyzer so the event handler can actually generate the event that starts the automation flow.
Option C is also correct. The study guide explains that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to the FortiGate side, and in the attack-detection example it says "FortiAnalyzer parses the logs and notifies the root FortiGate" and then
"The root FortiGate triggers the action." It also explicitly shows "Stitches configured on root FortiGate." This means the FortiGate must have the corresponding automation trigger configured for the FortiAnalyzer event handler notification.
Option A is incorrect because the study guide does not describe configuring an Action on FortiAnalyzer as the required step for this FortiAnalyzer-to-FortiGate automation-stitch flow. Option B is also incorrect because playbooks are a different FortiAnalyzer automation mechanism; the question specifically refers to using the Automation Stitch option in the event handler.


NEW QUESTION # 50
Refer to the exhibit.

An automation trigger creation wizard is shown. You want to automate some tasks in your OT network. In a FortiGate device, you create a new automation trigger based on a FortiAnalyzer event handler. When you want to configure the Event handler name field, the event handler created in FortiAnalyzer is not shown.
What are two reasons for this? (Choose two answers)

Answer: A,B

Explanation:
The correct answers are A and B .
Option B is correct because the study guide states that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to FortiGate. If Automation Stitch is not enabled in the FortiAnalyzer event handler, that handler will not be usable for the FortiGate automation- stitch workflow. The guide also explains that the configuration of each event handler can include
"Automation stitches" and "Rules," showing that this is a required part of the FortiAnalyzer-to-FortiGate automation path.
Option A is also correct. The study guide explains the automation flow in the Security Fabric:
"FortiAnalyzer parses the logs and notifies the root FortiGate" and then "The root FortiGate triggers the action." That means FortiGate must have the FortiAnalyzer connection configured through the Security Fabric side before it can consume FortiAnalyzer event handlers. The warning in the exhibit about configuring a FortiAnalyzer connection also points directly to that requirement.
Option C is incorrect because + Create is not the reason the existing event handler is missing; it is only an interface control. Option D is not the best answer for this item because the question is about why the event handler name list on FortiGate is empty for FortiAnalyzer-triggered automation. The study guide's verified requirements for that workflow are the FortiAnalyzer-to-FortiGate Fabric connection and enabling Automation Stitch on the FortiAnalyzer event handler.


NEW QUESTION # 51
Refer to the exhibit.

An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)

Answer: C

Explanation:
The correct answer is D. EtherCAT . The study guide explicitly states under the Ethernet/IP and EtherCAT section that "EtherCAT is a protocol that offers real-time communication in a primary-secondary configuration" and "EtherCAT skips layers 3 to 6 to deliver real-time communication." It also adds that
"the most important feature of this protocol is that secondary devices collect only the information they need from the data packets." This matches the exhibit exactly, where the diagram shows Real-Time Data above a Proprietary MAC and Proprietary physical layer , reflecting the protocol structure that bypasses the intermediate OSI layers.
The other options do not match this behavior. The guide says POWERLINK uses layer 2 and layer 7 of the OSI model, not that it skips layers 3 to 6. It also explains that Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the OSI model. Modbus is described as an open client/server protocol and is not suitable for transmitting data in real time . Therefore, the protocol in the exhibit is clearly EtherCAT .


NEW QUESTION # 52
......

Each of us is dreaming of being the best, but only a few people take that crucial step. The key step is to work hard to make yourself better. Our NSEI_OTS_AR-7.6 study materials may become your right man. Perhaps you have heard of our NSEI_OTS_AR-7.6 Exam Braindumps. A lot of our loyal customers are very familiar with their characteristics. And our NSEI_OTS_AR-7.6 learning quiz have become a very famous brand in the market and praised for the best quality.

New NSEI_OTS_AR-7.6 Dumps: https://www.dumpstorrent.com/NSEI_OTS_AR-7.6-exam-dumps-torrent.html