What's more, part of that DumpsKing JN0-336 dumps now are free: https://drive.google.com/open?id=1jTAL7OFoPFCe5idOuJaqfMEBUEn3d9Fo
To pass Juniper JN0-336 certification exam seems to be a very difficult task. Having registered JN0-336 test, are you worrying about how to prepare for the exam? If so, please see the following content, I now tell you a shortcut through the JN0-336 Exam. The certification training dumps that can let you pass the test first time have appeared and it is DumpsKing Juniper JN0-336 exam dumps. If you would like to sail through the test, come on and try it.
| Section | Objectives |
|---|---|
| Topic 1: High Availability (HA) Clustering | - Chassis cluster configuration - Failover and synchronization - Monitoring and troubleshooting - Cluster architecture and concepts |
| Topic 2: Application Security | - Application identification - Application firewall - Configuration, monitoring and troubleshooting - Application Quality of Service (QoS) - Advanced Policy-Based Routing (APBR) |
| Topic 3: Juniper Secure Analytics (JSA) | - Log collection and analysis - Event correlation and reporting - Integration with SRX devices |
| Topic 4: SSL Proxy | - SSL forward proxy - Certificate management - SSL reverse proxy - Configuration and troubleshooting |
| Topic 5: Virtual SRX / cSRX | - Deployment and architecture - Configuration and management - Resource allocation and scaling |
| Topic 6: Advanced Security Policies | - Application Layer Gateways (ALGs) - Configuration, monitoring and troubleshooting - Logging - Scheduling - Unified security policies - Session management |
| Topic 7: IPsec VPNs | - Site-to-site IPsec VPN - Remote access VPN - VPN monitoring and troubleshooting |
| Topic 8: Intrusion Detection and Prevention (IDP/IPS) | - Configuration, monitoring and troubleshooting - IPS database management - IPS policies |
| Topic 9: Advanced Threat Prevention (ATP) | - Configuration, monitoring and troubleshooting - Juniper ATP On-Premises - Juniper ATP Cloud - File analysis and threat intelligence |
| Topic 10: Security Director | - Management and monitoring - Policy management - Deployment and configuration |
| Topic 11: Identity-Aware Security | - Integration with directory services - Juniper Identity Management Service (JIMS) - Identity-based policies |
In a word, you can try our free JN0-336 study guide demo before purchasing, Security, Specialist (JNCIS-SEC) Pdf After the researches of many years, we found only the true subject of past-year exam was authoritative and had time-validity, For your benefit, DumpsKing is putting forth you to attempt the free demo and Juniper JN0-336 Exam Dumps the best quality highlights of the item, because nobody gives this facility only the DumpsKing JN0-336 Free Learning provide this facility. The example on the right was a simple widget designed Reliable JN0-336 Pdf to track points in a rewards program, The pearsonvue website is not affiliated with us, Although computers are great at gathering, manipulating, and calculating raw data, humans prefer their data presented in an orderly fashion.
NEW QUESTION # 19
Which three algorithms are used to encrypt IP packets? (Choose three.)
Answer: A,B,D
Explanation:
The correct answers are A, D, and E. In IPsec VPN terminology, DES, 3DES, and AES are encryption algorithms used to provide confidentiality for protected IP traffic. Juniper's IPsec material identifies AES, DES, and Triple DES/3DES as IPsec encryption standards, while separating them from authentication hash algorithms such as MD5, SHA-1, and SHA-2. This distinction matters heavily in JNCIS-SEC because IPsec proposals contain different cryptographic functions: encryption protects packet confidentiality, while authentication/hash algorithms validate integrity and origin.
Option B, SHA-1, is incorrect because SHA-1 is a hashing/authentication algorithm, not an encryption algorithm. It produces a message digest used for integrity checking and authentication, commonly as an HMAC variant. Option C, MD5, is also incorrect for the same reason: MD5 is a message-digest algorithm used for authentication/integrity, not for encrypting payload data. AES is the modern preferred encryption family because it is cryptographically stronger than DES and 3DES at comparable key strengths, while DES and 3DES remain historically recognized IPsec encryption algorithms. Reference topics: IPsec VPN, IPsec proposals, encryption algorithms, authentication algorithms, DES, 3DES, AES, SHA, and MD5.
NEW QUESTION # 20
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: C,D
Explanation:
The correct answers are B and D. The command output is from the SRX Series device: show services user- identification identity-management status. Under Primary server, the exhibit shows Address: 192.168.1.10, Port: 443, Connection method: HTTPS, and Connection status: Online. In Juniper Identity Management Service integration, the SRX is the client that connects to the configured primary JIMS server. Juniper's configuration workflow specifically describes configuring "the IP address of the primary JIMS server" under services user-identification identity-management connection primary address, and the verification output shows that primary server address with its connection status.
Option A is wrong because 192.168.1.10 is listed under Primary server, not as the local SRX address. Option C is also wrong because this SRX command verifies the SRX-to-JIMS identity-management connection, not the backend JIMS-to-domain-controller connection. Domain controller reachability would be validated from JIMS or through JIMS-specific status/monitoring, not by this SRX-side output. The displayed Online state and OK (200) status confirm that the SRX successfully reached the JIMS HTTPS service and received a valid response. Juniper examples use the same status command to validate that the SRX identity-management connection to JIMS is online.
Reference topics: Identity-Aware Security Policies, Juniper Identity Management Service, SRX-to-JIMS connectivity, identity-management status verification.
NEW QUESTION # 21
Click the Exhibit button.
You have implemented SSL client protection proxy. Employees are receiving the error shown in the exhibit.
How do you solve this problem?
Answer: A
Explanation:
SSL client protection proxy is a feature that allows you to decrypt and inspect the SSL traffic from clients to servers. To do this, you need to install a certificate authority (CA) certificate on the SRX Series device and import the same certificate to each client device. This way, the SRX Series device can act as a proxy between the client and the server and perform security checks on the decrypted traffic. If the client device does not have the certificate installed, it will receive an error message like the one shown in the exhibit. Reference: = JNCIS-SEC Certification, Open Learning - Security, Specialist (JNCIS-SEC), SSL Proxy Configuration
NEW QUESTION # 22
You are asked to configure a cluster between SRX1 and SRX2.
Which two commands must be used to accomplish this task? (Choose two.)
Answer: C,D
Explanation:
The correct answers are B and C. To form an SRX chassis cluster, both devices must be assigned the same cluster ID and different node IDs. Juniper states that the cluster ID identifies the cluster, while the node ID identifies the individual node within that cluster. A valid two-node SRX chassis cluster uses node 0 on one chassis and node 1 on the other chassis. Juniper's example shows the operational-mode commands as set chassis cluster cluster-id 1 node 0 reboot on the first device and set chassis cluster cluster-id 1 node 1 reboot on the second device.
Option A is wrong because cluster-id 0 disables clustering rather than forming a cluster. It also shows configuration-mode prompt #, while this chassis cluster node assignment is performed from operational mode.
Option D is doubly wrong: cluster-id 0 disables clustering, and node 2 is invalid because SRX chassis cluster node IDs are limited to 0 and 1. The exam options omit the reboot keyword, but the only logically valid pair is still SRX1 as node 0 and SRX2 as node 1 under the same nonzero cluster ID. Reference topics: HA Clustering, chassis cluster ID, node ID, operational-mode cluster enablement.
NEW QUESTION # 23
A client has attempted communication with a known command-and-control server and it has reached the configured threat level threshold.
Which feed will the clients IP address be automatically added to in this situation?
Answer: C
Explanation:
Infected hosts are internal hosts that have been compromised by malware and are communicating with external C&C servers3. Juniper ATP Cloud provides infected host feeds that list internal IP addresses or subnets of infected hosts along with a threat level3. Once the Juniper ATP Cloud global threshold for an infected host is met, that host is added to the infected host feed and assigned a threat level of 10 by the cloud4. You can also configure your SRX Series device to block traffic from these IP addresses using security policies4.
NEW QUESTION # 24
......
Most experts agree that the best time to ask for more dough is after you feel your JN0-336 performance has really stood out. To become a well-rounded person with the help of our JN0-336 study questions, reducing your academic work to a concrete plan made up of concrete actions allows you to streamline and gain efficiency, while avoiding pseudo work and guilt. Our JN0-336 Guide materials provide such a learning system where you can improve your study efficiency to a great extent.
Test JN0-336 Tutorials: https://www.dumpsking.com/JN0-336-testking-dumps.html
BTW, DOWNLOAD part of DumpsKing JN0-336 dumps from Cloud Storage: https://drive.google.com/open?id=1jTAL7OFoPFCe5idOuJaqfMEBUEn3d9Fo