참고: ITDumpsKR에서 Google Drive로 공유하는 무료, 최신 F5CAB5 시험 문제집이 있습니다: https://drive.google.com/open?id=1Bk-eBk-A0n7tl0bBd6RRTBbEt2vPWOay
지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중F5 F5CAB5인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Monitoring & Health Checks | 10% | - Monitor types and configuration
|
| Topic 2: Networking & Routing | 15% | - VLANs, self-IPs, and routes
|
| Topic 3: Traffic Management Fundamentals | 25% | - Virtual servers, pools, and nodes
|
| Topic 4: BIG-IP System Architecture & Initial Setup | 20% | - Platform and hardware components
|
| Topic 5: Maintenance & Upgrades | 10% | - Software installation and upgrades
|
| Topic 6: Troubleshooting & Support | 20% | - Common issues and resolution
|
F5 F5CAB5 덤프구매전 한국어 온라인상담서비스부터 구매후 덤프 무료 업데이트버전제공 , F5 F5CAB5시험불합격시 덤프비용 전액환불 혹은 다른 과목으로 교환 등 저희는 구매전부터 구매후까지 철저한 서비스를 제공해드립니다. F5 F5CAB5 덤프는 인기덤프인데 지금까지 덤프를 구매한후 환불신청하신 분은 아직 없었습니다.
질문 # 81
Refer to the exhibit.
The image shows the status of a virtual server named application_vs in the BIG-IP Configuration Utility.
What is the cause of the status shown? (Choose two answers)
정답:A,D
설명:
The exhibit shows the virtual server application_vs with a status indicating it is offline but enabled. In BIG-IP terminology, this status means the virtual server itself is administratively enabled, but it is unable to pass traffic because no usable pool members are available.
Two common and documented causes for this condition are:
Pool member(s) administratively disabled (Option A):
When all pool members are administratively disabled, BIG-IP removes them from load-balancing decisions. Even though the virtual server remains enabled, it has no available pool members to send traffic to, resulting in an offline status.
Node(s) administratively disabled (Option C):
Pool members inherit the status of their parent nodes. If a node is administratively disabled, all associated pool members are also marked unavailable. This condition causes the virtual server to show as offline, even though the virtual server configuration itself is correct.
The other options are incorrect:
Forced offline pool members (Option B) result in a different operational intent and are explicitly set for maintenance scenarios.
Virtual server administratively disabled (Option D) would show the virtual server as disabled, not enabled/offline.
This behavior is consistent with BIG-IP traffic management logic and is commonly verified by reviewing pool and node availability states when diagnosing virtual server availability issues.
질문 # 82
A BIG-IP device sends out the following SNMP trap:
big-ipo.f5.com - bigipExternalLinkChange Link: 1.0 is DOWN.
Where in the BIG-IP Configuration utility should the BIG-IP Administrator verify the current status of Link 1.0?
정답:B
설명:
Identifying network-level performance issues often starts with investigating hardware-level alerts.
In F5 terminology, a "Link" like "1.0" or "1.1" refers to a physical interface on the appliance. When an SNMP trap reports that a link is "DOWN," it indicates a loss of signal or an administrative shutdown of the physical port. To verify this, the administrator must navigate to Network > Interfaces > Interface List. This screen provides real-time status, showing whether the interface is
"up," "down," or "uninitialized," as well as any media speed or duplex mismatches that could be causing performance degradation. Troubleshooting this is the first step in resolving "pool member down" or "VLAN failsafe" issues, as a down interface will take down any VLANs associated with it, immediately halting all traffic flow for the services relying on that physical path.
질문 # 83
A BIG-IP Administrator configured the following virtual server to pass traffic on all addresses and ports. After configuration is completed, the BIG-IP Administrator notices that the virtual server is unable to pass traffic.
Plaintext
ltm virtual forwarding_any_vs {
destination 0.0.0.0:any
ip-forward
mask 255.255.255.255
profiles {
fastL4 {}
}
serverssl-use-sni disabled
source 0.0.0.0/0
translate-address disabled
translate-port disabled
}
Which part of the configuration is the cause of the issue?
정답:C
설명:
The failure of the Forwarding (IP) virtual server is caused by an incorrect Network Mask configuration for a wildcard destination.
Wildcard Destination: The administrator intends to create a "Wildcard" Virtual Server that listens for any destination IP address (0.0.0.0).
The Mask Conflict: A mask of 255.255.255.255 (or /32) tells the BIG-IP to look for a specific, single host address. When combined with 0.0.0.0, the system is literally looking for traffic destined for the IP 0.0.0.0, which is not a valid routable destination for standard traffic.
Correct Configuration: To allow the virtual server to catch traffic for any IP address, the mask must be changed to 0.0.0.0 (or /0). This signifies that the system should ignore all bits of the destination address and match everything.
Forwarding Logic: The rest of the configuration-including ip-forward (Forwarding IP type), translate-address disabled, and translate-port disabled-is correct for a BIG-IP acting as a router/gateway.
질문 # 84
Users report that traffic is negatively affected every time a BIG-IP device fails over. The traffic becomes stabilized after a few minutes. What should the BIG-IP Administrator do to reduce the impact of future failovers?
정답:B
설명:
When traffic "stabilizes after a few minutes" following a failover, it points to a network-level performance issue involving ARP cache on upstream routers and switches. Each BIG-IP interface has a unique hardware MAC address. During failover, the Standby device takes over the floating IP address, but the upstream switch still associates that IP with the MAC of the now-offline device. Traffic is lost until the switch learns the new MAC or its ARP entry expires. "MAC Masquerading" solves this by creating a shared, virtual MAC address for the floating traffic group.
This virtual MAC is used by whichever device is currently active. Because the MAC address for the virtual server IP never changes from the perspective of the network, the upstream devices do not need to update their ARP tables. This troubleshooting solution eliminates the delay associated with failover, providing a seamless transition and ensuring that application traffic flow is not disrupted when the BIG-IP HA state changes.
질문 # 85
The BIG-IP Administrator is investigating disk utilization on the BIG-IP device. (Exhibit shows /dev/md4 mounted on / at 100% utilization). What should the BIG-IP Administrator check next?
정답:D
설명:
Monitoring resource utilization is essential for maintaining system stability. If the root (/) file system reaches
100% capacity, the BIG-IP may become unresponsive, fail to save configuration changes, or experience daemon crashes83. When the / partition is full, the immediate troubleshooting step is to identify large or unnecessary files-such as old log files, core dumps, or temporary installer files-located specifically within that file system84. In the provided exhibit, /dev/md4 is explicitly listed at 100% usage for the / mount point85. Checking other partitions like /usr (which is at 82% in the exhibit) would not resolve the immediate
"Full" status of the root directory86. Administrators often use the du (disk usage) command via the CLI to find the problematic files. Managing disk space is a proactive task; however, when utilization hits 100%, it becomes a reactive troubleshooting emergency that must be resolved to restore the management plane's functionality.
질문 # 86
......
여러분은F5 F5CAB5인증시험을 패스함으로 IT업계관련 직업을 찿고자하는 분들에게는 아주 큰 가산점이 될수 있으며, 성덩한 IT업계사업자와 한걸음 가까와 집니다.
F5CAB5시험내용: https://www.itdumpskr.com/F5CAB5-exam.html
참고: ITDumpsKR에서 Google Drive로 공유하는 무료, 최신 F5CAB5 시험 문제집이 있습니다: https://drive.google.com/open?id=1Bk-eBk-A0n7tl0bBd6RRTBbEt2vPWOay