BONUS!!! Download part of RealExamFree 300-110 dumps for free: https://drive.google.com/open?id=1MZ5rHma0329IsTutTZ4FA2nKmuCfj8ql
For the convenience of the users, the 300-110 test materials will be updated on the homepage and timely update the information related to the qualification examination. Annual qualification examination, although content broadly may be the same, but as the policy of each year, the corresponding examination pattern grading standards and hot spots will be changed, as a result, the 300-110 Test Prep can help users to spend the least time, you can know the test information directly what you care about on the learning platform that provided by us, let users save time and used their time in learning the new hot spot concerning about the knowledge content.
| Section | Weight | Objectives |
|---|---|---|
| WLAN High Availability | 20% | - Design AP high availability - Design controller high availability |
| Wired and Wireless Infrastructure | 30% | - Design for data, voice, video, location - Physical infrastructure requirements - Design radio management - Design wireless bridging (mesh) - Design high-density wireless networks - Logical infrastructure requirements |
| Wireless Site Survey | 25% | - Layer 1 site survey analysis - Planning tools and network metrics evaluation - Collect design requirements and evaluate constraints - Pre-deployment site survey - Post-deployment site survey - Predictive site survey - Material attenuation and its design effects |
| Mobility | 25% | - Design mobility groups - Validate mobility tunneling - Site Tags - Optimize client roaming |
>> 300-110 Reliable Braindumps Free <<
Our Cisco 300-110 Exam Dumps effect in helping candidates' certification exam. Original questions are also important. These would provide a forum where certification training can be carried on. Our dumps torrent is perfect and practice test is also the latest. After you purchase our product, we offer free update service for one year.
NEW QUESTION # 79
A school deploys a Cisco wireless infrastructure in its classrooms to support a high density of mobile devices. The network administrator wants to bond channels in groups of two and only allow APs to send 802.11 management frames at 24 Mbps. What should be included in the design to accomplish this objective?
Answer: C
Explanation:
For a high-density classroom deployment using 5 GHz with channel bonding in groups of two (40 MHz channels), the correct configuration is to set the channel width for 802.11a (5 GHz) to 40 MHz and set the 24 Mbps data rate to Mandatory. Channel bonding refers to combining two adjacent 20 MHz channels into a single 40 MHz channel, doubling the channel width. Since the requirement specifies 5 GHz operation (where high-density design is appropriate), this must be applied to the 802.11a radio profile, not 802.11b (which operates only on 2.4 GHz). Setting 24 Mbps as Mandatory ensures that APs transmit management frames (beacons, probe responses, and other control frames) only at 24 Mbps -- this is how the 'only allow APs to send 802.11 management frames at 24 Mbps' requirement is implemented.
NEW QUESTION # 80
An engineer must assess an existing company WLAN to determine the possibility for future IEEE
802.11ac Wave 2 wireless deployment. All access switches are Fast Ethernet-capable only, and the wired infrastructure between existing APs and access switches is based on the CAT 6A standard. Which two actions provide maximum support of Cisco 3800 Series access points?
(Choose two.)
Answer: A,E
Explanation:
Cisco 3800 Series APs support IEEE 802.11ac Wave 2, which can deliver throughput exceeding
1 Gbps. Fast Ethernet switches are limited to 100 Mbps per port, creating a severe bottleneck.
The two actions that provide maximum support are replacing with mGig switches (Option A) and replacing with gigabit switches with 10G uplinks (Option B). mGig (Multi-Gigabit Ethernet) switches support 2.5G and 5G speeds over existing CAT 6A cabling, allowing the full throughput of 802.11ac Wave 2 APs to be utilized without replacing the existing cable plant. Gigabit switches with 10G uplinks ensure that the access layer can support 1 Gbps per AP port while providing sufficient uplink capacity.
NEW QUESTION # 81
A conference center is designing a Wi-Fi 6 deployment for a room holding 2000 attendees, most of whom will use low-bandwidth applications. Which Wi-Fi 6 capability most directly improves efficiency in this scenario?
Answer: B
Explanation:
The defining problem in a high-density room with many low-bandwidth clients is not raw per-client throughput but the overhead of medium contention - under 802.11ac, each small packet requires a full channel access cycle, so the channel spends most of its airtime on contention and preamble rather than payload. OFDMA divides the channel into resource units so the AP can serve multiple clients within a single transmit opportunity, dramatically reducing per-frame overhead when the traffic mix is many small transmissions. This is precisely the profile of a conference audience running chat, email, and browsing. 1024-QAM raises peak modulation but only benefits clients already at very high signal levels and does nothing for contention. 160 MHz channel bonding is counterproductive in high density because it collapses the number of reusable channels. Target Wake Time improves client battery life by scheduling wake intervals, which is valuable for IoT but does not address the airtime efficiency problem in this design.
NEW QUESTION # 82
A wireless engineer is getting ready to perform a predictive site survey. The new network needs to support data and voice over wireless. Which two Cisco recommendations should be considered for the design?
(Choose two.)
Answer: C,D
Explanation:
For a network supporting both data and voice over wireless, two key Cisco design recommendations apply.
First, the 5 GHz radio band is recommended for voice over wireless due to its wider channel bandwidths, allowing for higher data rates and better quality of service for latency-sensitive applications. 40 MHz channels in the 5 GHz band provide significantly higher throughput than 20 MHz channels in 2.4 GHz, making Option B correct for the bandwidth reason stated. Second, setting the cell boundary to -67 dBm ensures sufficient signal strength for reliable voice communication at the cell edge, which is the Cisco standard threshold for VoWLAN coverage. Options C and E are partially correct (24 non-overlapping channels is accurate, 15-20% overlap is standard) but B and D are the primary Cisco recommendations that define the design targets for a predictive survey supporting voice. Reference: WLSD Study Guide - VoWLAN Design Requirements, Predictive Survey Design Criteria, 5 GHz Band Selection.
NEW QUESTION # 83
A consulting engineer for a copper mine is trying to extend the network connectivity of autonomous trucks via Cisco IW3702 APs. The WGB design requirements include: latency- sensitive application (truck slows at 10 sec, stops at 20 sec of connection loss), aggressive scanning and roaming, enterprise-grade security without certificates on each AP, multiple clients in different VLANs on the WGB, and channel scan parameters restricted to only channels in the truck path. Which design approach meets the requirements?
Answer: B
Explanation:
This WGB (Workgroup Bridge) design scenario requires satisfying multiple simultaneous constraints. EAP-FAST (Flexible Authentication via Secure Tunneling) is the correct authentication protocol because it provides enterprise-grade 802.1X security using protected access credentials (PAC) without requiring a certificate to be installed on each AP or WGB device
-- directly satisfying the enterprise-grade security without certificates requirement. EAP-TLS (Options B and D) requires client certificates on every authenticating device, which is explicitly excluded. Mobile station mode is required rather than static mode (Options C and D) because mobile station mode enables the WGB to aggressively scan and roam to optimal mesh neighbors dynamically, evaluating neighbor signal quality and switching to better RAPs/MAPs as the truck moves along its path. Static mode fixes the WGB to a specific channel or AP, preventing the aggressive scanning and roaming required for the latency-sensitive application. The dot1q- capable switch connection supports multiple clients in different VLANs via 802.1Q VLAN tagging between the WGB and the truck's local network switch.
NEW QUESTION # 84
......
These are expertly designed Cisco 300-110 mock tests, under the supervision of thousands of professionals. A 24/7 customer service is available for assistance in case of any sort of pinch. It shows results at the end of every 300-110 mock test attempt so you don't repeat mistakes in the next try. To confirm the license of the product, you need an active internet connection. RealExamFree desktop Designing Cisco Wireless Networks (300-110) practice test is compatible with every Windows-based computer. You can use this software without an active internet connection.
300-110 Latest Test Guide: https://www.realexamfree.com/300-110-real-exam-dumps.html
DOWNLOAD the newest RealExamFree 300-110 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1MZ5rHma0329IsTutTZ4FA2nKmuCfj8ql