There is no doubt that obtaining this SRAN-Radio-Network-Performance-Optimization certification is recognition of their ability so that they can find a better job and gain the social status that they want. Most people are worried that it is not easy to obtain the certification of SRAN-Radio-Network-Performance-Optimization, so they dare not choose to start. We are willing to appease your troubles and comfort you. We are convinced that our SRAN-Radio-Network-Performance-Optimization test material can help you solve your problems. Compared to other learning materials, our SRAN-Radio-Network-Performance-Optimization exam qeustions are of higher quality and can give you access to the SRAN-Radio-Network-Performance-Optimization certification that you have always dreamed of.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: SRAN Architecture and Fundamentals | 15-20% | - SRAN network architecture overview - Single RAN integration principles - SRAN solution components and functions - Radio access concepts and principles |
| Topic 2: Radio Network Performance Monitoring | 20-25% | - Performance monitoring tools and dashboards - Real-time network monitoring techniques - Performance data collection and analysis - KPI definition and measurement - Threshold configuration and alerting |
| Topic 3: SRAN Optimization Tools and Reports | 10-15% | - Automated optimization features - Nokia NetAct and performance tools - Report generation and interpretation - Configuration management for optimization |
| Topic 4: Performance Troubleshooting | 20-25% | - Network failure identification and resolution - Root cause analysis methodologies - Optimization case studies - Common performance issues diagnosis - Troubleshooting tools utilization |
| Topic 5: Radio Network Optimization Techniques | 25-30% | - Coverage optimization methods - Handover optimization - Parameter tuning best practices - Load balancing techniques - Capacity optimization strategies - Interference analysis and mitigation |
>> SRAN-Radio-Network-Performance-Optimization Latest Test Cost <<
Nokia SRAN-Radio-Network-Performance-Optimization study material of "GetValidTest" is available in three different formats: PDF, desktop-based practice test software, and a browser-based practice SRAN-Radio-Network-Performance-Optimization exam questions. MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) practice tests are a great way to gauge your progress and identify weak areas for further study. Check out features of these formats.
NEW QUESTION # 21
Evaluate the impact of extended FR2 cell range on power consumption.
Answer: C
Explanation:
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.
NEW QUESTION # 22
In a 5G NSA Option 3x deployment, why should we not define 5G neighbors in LTE sectors where there is no 5G coverage ?
Answer: B
Explanation:
The correct answer is A .
In 5G NSA Option 3x , LTE acts as the Master Cell Group , and NR acts as the Secondary Cell Group , usually added through EN-DC . If 5G NR neighbors are configured in an LTE sector where there is actually no 5G coverage , the LTE eNB may still configure the UE to perform NR measurements.
To perform NR inter-RAT or inter-frequency measurements, the UE may require measurement gaps .
During these gaps, the UE stops normal LTE reception/transmission activities to measure NR frequencies. If there is no real 5G coverage, those gaps become wasted measurement time and can reduce LTE user throughput.
Option B is not the best answer because if there is no 5G coverage, the main issue is not successful SCG addition or handover degradation, but unnecessary measurement activity. Option C is also not correct because redirection from 5G to 4G normally occurs when the UE is already on or connected to 5G coverage, which is not the case here.
Therefore, the main reason is:
LTE throughput degradation due to unnecessary measurement gap configuration.
NEW QUESTION # 23
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?
Answer: C
NEW QUESTION # 24
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?
Answer: B
Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.
NEW QUESTION # 25
Which of the following statements about CBRA , or contention-based random access , is correct?
Answer: C
Explanation:
The correct answer is B .
In contention-based random access , the UE chooses a random access preamble by itself from a configured pool of available contention-based preambles. This is typically used when the UE does not yet have a dedicated connection or when the network has not assigned a dedicated preamble.
Because multiple UEs may choose the same preamble at the same time, preamble collision is possible . That is why CBRA requires a contention resolution step.
Option C describes contention-free random access , not CBRA. In contention-free random access, the network assigns a dedicated preamble to the UE, so collision risk is avoided and contention resolution is not required.
Option A is not the correct CBRA principle being tested. RACH false detection can be a receiver/design issue, but it does not define the CBRA procedure.
Option D describes a possible NSA signaling behavior around access failure handling, but it is not the core correct definition of CBRA.
Therefore, the correct CBRA statement is:
The UE autonomously selects a preamble from the configured range and starts the random access procedure.
NEW QUESTION # 26
......
Our product boosts multiple functions and they can help the clients better learn our SRAN-Radio-Network-Performance-Optimization study materials and prepare for the test. Our SRAN-Radio-Network-Performance-Optimization learning prep boosts the self-learning, self-evaluation, statistics report, timing and test stimulation functions and each function plays their own roles to help the clients learn comprehensively. The self-learning and self-evaluation functions of our SRAN-Radio-Network-Performance-Optimization Guide materials help the clients check the results of their learning of the study materials. In such a way, they can have the best pass percentage.
Authorized SRAN-Radio-Network-Performance-Optimization Certification: https://www.getvalidtest.com/SRAN-Radio-Network-Performance-Optimization-exam.html