Our web-based practice exam software is an online version of the Microsoft AB-650 practice test. It is also quite useful for instances when you have internet access and spare time for study. To study and pass the certification exam on the first attempt, our Microsoft AB-650 Practice Test software is your best option. You will go through Microsoft AB-650 exams and will see for yourself the difference in your preparation.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Manage Microsoft 365 workloads | 20-25% | - Administer collaboration services
|
| Topic 2: Implement security, compliance, and governance for AI and Microsoft 365 | 25-30% | - Secure AI-enabled workloads
|
| Topic 3: Manage Microsoft 365 tenant and identity services | 20-25% | - Configure and manage Microsoft 365 tenants
|
| Topic 4: Administer Microsoft 365 Copilot and AI services | 25-30% | - Manage Copilot and AI capabilities
|
The experts in our company have been focusing on the AB-650 examination for a long time and they never overlook any new knowledge. The content of our study materials has always been kept up to date. Don't worry if any new information comes out after your purchase of our AB-650 study guide. We will inform you by E-mail when we have a new version. With our great efforts, our study materials have been narrowed down and targeted to the AB-650 examination. So you don't need to worry about wasting your time on useless AB-650 exam materials information.
NEW QUESTION # 108
You have a Microsoft 365 subscription that uses Microsoft Defender for Office 365. Standard protection is enabled for all recipients.
The subscription contains a mail-enabled security group named Group1. Group1 contains users that require custom inbound anti-spam actions. A custom anti-spam inbound policy named Policy1 is applied to Group1 and has a priority value of 0.
You discover that email sent to the users in Group1 is evaluated by using the Standard preset security policy instead of Policy1.
You need to ensure that Policy1 is applied to Group1. All other recipients must continue to receive the Standard protection settings.
What should you do?
Answer: B
Explanation:
Microsoft Defender for Office 365 processes email protection policies according to a defined precedence order. When Standard or Strict preset security policies are enabled, they take precedence over custom anti- spam policies.
The general processing order is Strict preset security policy, Standard preset security policy, applicable evaluation policies, custom policies, and finally default protection.
Although Policy1 has priority 0, this value establishes its precedence among custom anti-spam policies only.
It cannot override the Standard preset security policy.
Option A is correct because excluding Group1 from Standard protection prevents the Standard preset security policy from applying to the group ' s members. These users can then be evaluated by Policy1, provided its recipient conditions match.
Administrators can configure this exception through the Microsoft Defender portal or the corresponding preset policy rule settings.
Option B is incorrect because disabling Standard protection would affect all recipients, violating the requirement to preserve Standard protection for other users.
Option C is incorrect because changing Policy1 to priority 1 lowers its precedence among custom policies and does not supersede Standard protection.
Option D is incorrect because adding exceptions to Policy1 does not change the precedence of Standard protection.
Therefore, Group1 must be excluded from the Standard preset security policy.
Microsoft References:
https://learn.microsoft.com/en-us/defender-office-365/preset-security-policies
https://learn.microsoft.com/en-us/defender-office-365/how-policies-and-protections-are-combined
NEW QUESTION # 109
You have a Microsoft 365 subscription that contains a security group named Group1. The object ID of Group1 is stored in a PowerShell variable named $groupId.
You have a CSV file named C:\Temp\members.csv that contains a column named memberObjectId. The column stores the directory object ID of each user that will be added to Group1.
You need to perform a bulk membership update for Group1 by using Microsoft Graph PowerShell.
How should you complete the script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
cCompleted PowerShell Script (Corrected for Execution):
Connect-MgGraph -Scopes " GroupMember.ReadWrite.All "
$members = Import-Csv -Path " C:\Temp\members.csv "
foreach ($member in $members) {
New-MgGroupMemberByRef -GroupId $groupId `
-OdataId " https://graph.microsoft.com/v1.0/directoryObjects/$($member.memberObjectId) "
}
Disconnect-MgGraph
Microsoft Graph PowerShell provides cmdlets for managing Microsoft Entra security group memberships, including bulk membership updates from CSV files.
First selection: Connect-MgGraph. This command establishes an authenticated Microsoft Graph session. The GroupMember.ReadWrite.All delegated permission authorizes modification of supported group memberships, subject to the signed-in user ' s administrative privileges.
Second selection: New-MgGroupMemberByRef. This cmdlet adds an existing Microsoft Entra directory object to a security group by creating a membership reference.
The -GroupId parameter identifies Group1, while -OdataId supplies the Microsoft Graph URL of the user object being added.
Import-Csv reads the user identifiers from C:\Temp\members.csv. The foreach loop processes each CSV record and adds the corresponding user to Group1.
Get-MgGroupMember and Get-MgGroupMemberByRef retrieve existing memberships rather than creating them. Update-MgGroup modifies group properties but is not the appropriate membership-reference operation.
Important correction: The original exhibit uses $member.ObjectId, but the CSV column is named memberObjectId. The script must reference $member.memberObjectId; otherwise, the object identifier will not be retrieved correctly.
Therefore, the correct dropdown answers are Connect-MgGraph and New-MgGroupMemberByRef.
Microsoft References:
* Microsoft Learn - New-MgGroupMemberByRef .
* Microsoft Graph - Add members to groups .
* Microsoft Graph PowerShell authentication commands .
NEW QUESTION # 110
You have a Microsoft 365 subscription.
Users can enable and disable web search from within Microsoft 365 Copilot.
You need to remove the web search option from Microsoft 365 Copilot Chat only when Work IQ is active.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Use: The Microsoft 365 Apps admin center; To configure: Policy Management
Microsoft 365 administrators can control whether Microsoft Copilot uses public web information to generate responses through Microsoft 365 Cloud Policy.
First selection: The Microsoft 365 Apps admin center.
The Microsoft 365 Apps admin center provides access to Cloud Policy, which centrally manages settings for Microsoft 365 applications and supported Copilot experiences.
Administrators can access these settings through config.office.com.
Second selection: Policy Management.
Within the Microsoft 365 Apps admin center, administrators navigate to Customization and Policy Management. They can create or update a policy configuration containing the Allow web search in Copilot setting.
Microsoft documents a configuration that disables web search in Copilot Work mode while preserving web functionality in Copilot Web mode and Copilot Chat.
This distinguishes work-grounded AI interactions from the general web-based experience.
If administrators disable web search entirely, the restriction applies more broadly and does not satisfy the requirement to target only the work-grounded experience.
The Microsoft Purview portal governs information protection, compliance, and data security. It is not the primary interface for this Cloud Policy setting.
Therefore, the Microsoft 365 Apps admin center and Policy Management are the correct selections.
Technical note: Microsoft distinguishes Work mode from Copilot Chat in its current documentation. The relevant setting is Disabled in Microsoft Copilot Work mode; Enabled in Microsoft Copilot Web mode and Microsoft Copilot Chat. This is the documented configuration corresponding most closely to the question ' s intended work-only restriction.
Microsoft References:
https://learn.microsoft.com/en-us/microsoft-365/copilot/manage-public-web-access
NEW QUESTION # 111
Your company has a Microsoft 365 subscription that contains the users shown in the following table.
External collaboration settings have default configuration.
You need to identify which users can perform the following administrative tasks:
* Modify the password protection policy.
* Invite an external user to collaborate with your company.
Which users should you identify for each task? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Modify the password protection policy: User1 only; Invite an external user: User1, User2, User3, and User4 Microsoft Entra ID uses role-based access control (RBAC) to authorize administrative operations. The two activities in this question have different permission requirements.
First selection: User1 only.
Modifying the tenant-wide password protection policy requires privileged authorization. The Global Administrator role held by User1 includes the permissions required to configure Microsoft Entra Password Protection, including the custom banned-password list and smart lockout settings.
The Authentication Policy Administrator role can also manage these settings, but none of the other listed users holds that role. User2 ' s Security Administrator role does not provide this specific permission, while User4 ' s Password Administrator role concerns password administration rather than configuration of the tenant-wide password protection policy.
Second selection: User1, User2, User3, and User4.
Microsoft Entra external collaboration settings allow users to invite external guests. Under the default configuration, organizational users can invite external users, including users without administrative roles.
User1 can invite guests as a Global Administrator, and User2 also has the Guest Inviter role. User3 and User4 can invite external users under the default invitation settings.
Therefore, all four users qualify for the second activity.
Microsoft References:
https://learn.microsoft.com/en-us/entra/identity/role-based-access-control/permissions-reference
https://learn.microsoft.com/en-us/entra/external-id/external-collaboration-settings-configure
NEW QUESTION # 112
You have a data loss prevention (DLP) policy.
You need to increase the likelihood that the DLP policy will apply to data that contains medical terms from the International Classification of Diseases (ICD-9-CM). The solution must minimize the number of false positives.
Which two settings should you modify? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Setting to modify
Correct Configuration
Logical operator between PII Identifiers and Medical Terms
Change and to or
Medical Terms # Match accuracy # min
Increase from 50 to 85 (High confidence)
Microsoft Purview Data Loss Prevention uses sensitive information types (SITs), Boolean operators, and confidence levels to determine whether content matches a DLP rule.
First selection: Change AND to OR.
The exhibit currently combines PII Identifiers and Medical Terms using an AND operator. This requires content to contain both a U.S. Social Security Number and an ICD-9-CM medical term before the rule matches.
Consequently, medical content without a Social Security Number will not trigger the policy.
Changing the operator to OR allows the rule to detect ICD-9-CM information independently, increasing the likelihood of identifying medical content.
Second selection: Increase minimum match accuracy to 85.
Microsoft defines high-confidence ICD-9-CM matches using corroborating dictionary evidence within a 300- character proximity.
Increasing the minimum match accuracy from 50 to 85 ensures that the medical terms condition matches only the high-confidence pattern.
This reduces false positives caused by ambiguous medical terminology, although some genuine matches with insufficient supporting evidence might be missed.
Important consideration: Changing AND to OR also permits Social Security Number-only matches. If the production requirement is to detect exclusively medical content, removing the unrelated PII condition would be more precise.
The two requested configuration changes provide broader medical-content detection while increasing classification confidence.
Microsoft References:
* Microsoft Learn - DLP rules, conditions, and logical operators .
* Microsoft Learn - ICD-9-CM sensitive information type definition .
* Microsoft Learn - Sensitive information type confidence levels
NEW QUESTION # 113
......
A lot of people are dreaming to pass the AB-650 exam. Also, you can start your own business after you totally master the skills of the AB-650 preparation exam expertly. Quickly, you will become the millionaire. Then it is time for others to envy your luxury life. All in all, our AB-650 Exam Prep is worth for investing. After all, you are the main beneficiary. Please follow your hearts and begin your new challenges bravely.
Certification AB-650 Exam Infor: https://www.pass4surequiz.com/AB-650-exam-quiz.html