What's more, part of that ITPassLeader NSE4_FGT_AD-7.6 dumps now are free: https://drive.google.com/open?id=10RXqKXBfTS8j1PCEWAyPsPHHrA_2KAlG
We promise you will pass the exam and obtain the Fortinet NSE 4 - FortiOS 7.6 Administrator certificate successfully with our help of NSE4_FGT_AD-7.6 exam questions. According to recent survey of our previous customers, 99% of them can achieve their goals, so believe that we can be the helping hand to help you achieve your ultimate goal. Bedsides we have high-quality NSE4_FGT_AD-7.6 test guide for managing the development of new knowledge, thus ensuring you will grasp every study points in a well-rounded way. On the other hand, if you fail to pass the exam with our NSE4_FGT_AD-7.6 Exam Questions unfortunately, you can receive a full refund only by presenting your transcript. At the same time, if you want to continue learning, our NSE4_FGT_AD-7.6 test guide will still provide free updates to you and you can have a discount more than one year. Finally our refund process is very simple. If you have any question about Fortinet NSE 4 - FortiOS 7.6 Administrator study question, please contact us immediately.
| Section | Objectives |
|---|---|
| Firewall Policies and Authentication | - User authentication
|
| Security Profiles and Content Inspection | - Web filtering and application control
|
| Network Security Concepts and Architecture | - Fortinet Security Fabric Overview
|
| VPN and Secure Connectivity | - SSL VPN
|
| Monitoring and Troubleshooting | - Logging and reporting
|
| FortiGate Deployment and System Configuration | - System maintenance
|
| Routing and SD-WAN | - SD-WAN configuration
|
>> NSE4_FGT_AD-7.6 New Study Notes <<
Our NSE4_FGT_AD-7.6 training materials are designed to help users consolidate what they have learned, will add to the instant of many training, the user can test their learning effect in time after finished the part of the learning content, have a special set of wrong topics in our NSE4_FGT_AD-7.6 guide torrent, enable users to find their weak spot of knowledge in this function, iterate through constant practice, finally reach a high success rate. As a result, our NSE4_FGT_AD-7.6 study questions are designed to form a complete set of the contents of practice can let users master knowledge to pass the NSE4_FGT_AD-7.6 exam.
NEW QUESTION # 72
When configuring a FortiGate in a multi-WAN setup, why would an administrator enable session preservation on an interface?
Answer: D
Explanation:
Session preservation keeps active sessions, such as SSL VPNs, tied to the original interface to prevent disruption when WAN routes change.
NEW QUESTION # 73
Refer to the exhibits, which show the system performance output and the default configuration of high memory usage thresholds in a FortiGate.
Based on the system performance output, what can be the two possible outcomes? (Choose two.)
Answer: A,D
Explanation:
FortiGate has entered conserve mode.
The system performance output shows memory usage at 90%, which exceeds the red threshold (88%) configured under memory-use-threshold-red. When this happens, FortiGate automatically enters conserve mode to preserve system stability by stopping or limiting memory-intensive processes.
Administrators cannot change the configuration.
In conserve mode, FortiGate restricts configuration changes and disables some non-essential services until memory usage drops below the green threshold (82%), ensuring that available memory is reserved for critical operations.
NEW QUESTION # 74
Refer to the exhibit.
FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles.
Which action must the administrator perform to consolidate the two policies into one?
Answer: A
Explanation:
"By default, you can select only a single interface as the incoming interface and a single interface as the outgoing interface. This is because the option to select multiple interfaces, or any interface in a firewall policy, is disabled on the GUI. However, you can enable the Multiple Interface Policies option on the Feature Visibility page to disable the single interface restriction."
"You can also specify multiple interfaces, or use the any option, if you configure a firewall policy on the CLI, regardless of the default GUI setting." Technical Deep Dive:
The correct answer is D.
The policies are identical except for the incoming interface: one is for Sales and one is for Engineering. FortiGate GUI policy creation normally restricts you to one incoming interface per policy. To consolidate both into a single GUI policy, the administrator must enable Multiple Interface Policies so both port1 and port2 can be selected in the same rule.
Why the others are wrong:
A is not enough, because policy matching also includes the incoming interface, not just the source subnets.
B changes the network design and is unnecessary.
C would work too broadly by matching traffic from any interface, which is not the intended controlled consolidation.
A matching CLI-style concept would be:
config firewall policy
edit <id>
set srcintf "port1" "port2"
set dstintf "<server-interface>"
set srcaddr "Sales_Subnet" "Engineering_Subnet"
set dstaddr "<web-server>"
set service "HTTP" "HTTPS"
set action accept
next
end
That preserves a single policy while still being specific about which interfaces are allowed.
NEW QUESTION # 75
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, which two configuration changes will bring phase 2 up? (Choose two.)
Answer: A,D
Explanation:
Phase 1 being up confirms the two FortiGate devices can authenticate and build the IKE SA. Phase 2 failing indicates the IPsec (Quick Mode) SA negotiation is failing due to mismatched Phase 2 parameters.
From the exhibit, the Phase 2 mismatches that would prevent SA establishment are:
1) Phase 2 selectors must mirror each other (Proxy IDs)
HQ-NGFW Phase 2 selector shows:
Local: 10.0.11.0/24
Remote: 172.20.1.0/24
BR1-FGT Phase 2 selector shows:
Local: 172.20.1.0/24
Remote: 10.11.0.0/24 ⟵ does not match HQ's local subnet (10.0.11.0/24)
In FortiOS, Phase 2 comes up only when the peers' selectors (proxy IDs) match as opposite pairs (local on one side = remote on the other).
✅ Fix: A. On BR1-FGT, set Remote Address to 10.0.11.0/255.255.255.0.
2) Phase 2 proposal must match (encryption/authentication)
HQ-NGFW shows encryption AES128 (with SHA1)
BR1-FGT shows encryption AES256 (with SHA1)
For Phase 2 to establish, both peers must have at least one common proposal (same encryption and authentication settings). With one side set to AES128 and the other to AES256, there is no match.
✅ Fix: D. On HQ-NGFW, set Encryption to AES256.
Why the other options are not correct
B . Enable Diffie-Hellman Group 2: The exhibit's mismatch is not resolved by adding DH group 2, and DH group must match when PFS is enabled. This option does not align the peers based on what's shown.
C . Set Seconds to 43200: Phase 2 lifetime mismatches typically do not prevent Phase 2 from coming up (the negotiated lifetime can be adjusted by the peers). The hard blockers here are the selectors and proposal mismatch.
NEW QUESTION # 76
An administrator has configured the following settings.
config system settings
set ses-denied-traffic enable
end
config system global
set block-session-timer 30
end
What are the two results of this configuration? (Choose two.)
Answer: A,D
Explanation:
"To reduce the number of log messages generated and improve performance, you can enable a session table entry of dropped traffic. This creates the denied session in the session table and, if the session is denied, all packets for that session are also denied. This ensures that FortiGate does not have to perform a policy lookup for each new packet matching the denied session, which reduces CPU usage and log generation."
"The CLI command is ses-denied-traffic. You can also set the duration for block sessions. This determines how long a session will be kept in the session table by setting block-session-timer in the CLI. By default, it is set to 30 seconds." Technical Deep Dive:
The correct answers are A and B .
When set ses-denied-traffic enable is configured, FortiGate creates a session-table entry for denied traffic .
That means once traffic is denied, subsequent packets that belong to the same denied flow do not need a full policy lookup again. FortiGate can drop them immediately based on the existing denied-session entry. That directly confirms B .
Because FortiGate no longer re-evaluates every repeated denied packet in the same way, the device generates fewer logs and uses less CPU for repeated denied traffic. That is exactly why A is also correct.
Why the other two are wrong:
* C is incorrect because block-session-timer 30 means 30 seconds , not 30 minutes. The denied session entry is kept in the session table for that duration.
* D is incorrect because these settings do not disable session helpers. They only control how denied traffic is tracked in the session table.
In operational terms, this feature is useful when a host repeatedly retries traffic that FortiGate is already denying. Instead of doing a fresh lookup for every retry, FortiGate caches the denied decision temporarily and drops the repeated packets faster.
NEW QUESTION # 77
......
We hope you can feel that we sincerely hope to help you. We hope that after choosing our NSE4_FGT_AD-7.6 study materials, you will be able to concentrate on learning our NSE4_FGT_AD-7.6 learning guide without worry. It is our greatest honor that you can feel satisfied. Of course, we will value every user. We will never neglect any user. Our NSE4_FGT_AD-7.6 Exam Braindumps will provide perfect service for everyone.
Certification NSE4_FGT_AD-7.6 Test Answers: https://www.itpassleader.com/Fortinet/NSE4_FGT_AD-7.6-dumps-pass-exam.html
2026 Latest ITPassLeader NSE4_FGT_AD-7.6 PDF Dumps and NSE4_FGT_AD-7.6 Exam Engine Free Share: https://drive.google.com/open?id=10RXqKXBfTS8j1PCEWAyPsPHHrA_2KAlG