What's more, part of that Itcerttest VNX301 dumps now are free: https://drive.google.com/open?id=1CGfX9WZZGnwG85cObHRs988ZCMYXNyIb
Our VNX301 exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the VNX301 certification successfully. With about ten yearsโ research and development we still keep updating our VNX301 Prep Guide, in order to grasp knowledge points in accordance with the exam, thus your study process would targeted and efficient.
| Section | Objectives |
|---|---|
| Topic 1: High Availability and Redundancy | - Redundant gateway and link resiliency - HA active-active and failover design |
| Topic 2: SD-WAN Fundamentals and Architecture | - Underlay and overlay network design - SD-WAN principles and architecture concepts |
| Topic 3: Security and Encryption | - Encryption and certificate management - Firewall policies and security services |
| Topic 4: Policy-Based Routing and Traffic Steering | - Application-aware routing policies - Path selection and SLA-based steering |
| Topic 5: Deployment and Provisioning | - Branch and edge deployment models - ZTP and onboarding workflows |
| Topic 6: QoS and Performance Optimization | - Latency, jitter, and bandwidth optimization - QoS/CoS configuration |
| Topic 7: Monitoring, Analytics and Troubleshooting | - Troubleshooting SD-WAN performance issues - Versa Analytics dashboards |
| Topic 8: Versa SD-WAN Platform Components | - VOS components and CPE devices - Versa Controller, Director, Analytics roles |
>> VNX301 Reliable Test Simulator <<
Among all substantial practice materials with similar themes, our VNX301 practice materials win a majority of credibility for promising customers who are willing to make progress in this line. With excellent quality at attractive price, our VNX301 practice materials get high demand of orders in this fierce market with passing rate up to 98 to 100 percent all these years. We shall highly appreciate your acceptance of our VNX301 practice materials and your decision will lead you to bright future with highly useful certificates.
NEW QUESTION # 53
What are three roles that VOS performs? (Choose three.)
Answer: B,C,E
Explanation:
The correct answers are A, B, and E . Versa Operating System, or VOS , is the software platform used for Versa SD-WAN branch and headend functions. Versa troubleshooting documentation explicitly refers to common runtime state across SD-WAN Controller, branch, and hub devices , confirming that VOS is used for Controller and branch-style SD-WAN roles. Versa monitoring documentation also lists SD-WAN branches, SD-WAN Controller nodes, SD-WAN hubs, vCPEs, and uCPEs as assets that are monitored and managed in Versa Director, which aligns with VOS being used as a branch/edge and controller platform.
VOS can also act as a uCPE platform . Versa documentation includes procedures to configure uCPE on a VOS device, showing that VOS can host or support uCPE deployment use cases.
The originally provided answer A, C, D is not correct. A Log Collector or log forwarder function belongs to the Versa Analytics architecture, not the VOS branch role; Versa's design guide states that the log forwarder is part of the Versa Analytics node or can run as a standalone log-forwarder server.
A Zookeeper arbiter is also not a standard VOS SD-WAN device role in this context.
NEW QUESTION # 54
Which two methods would be used to upgrade deployed VOS branch devices? (Choose two.)
Answer: B,C
Explanation:
The correct answers are A and C . Versa supports upgrading deployed VOS branch devices either directly on the VOS appliance or centrally through Versa Director. The Director-based method is performed from the Administration > Appliances area: Versa documentation says to select one or more Controller nodes or VOS devices, click the Upgrade Selected Appliances icon, choose the software image package, and proceed with the appliance upgrade. The same upgrade procedure is referenced for remaining VOS branch devices, including the option to upgrade branches individually or all at once.
A CLI-based upgrade using a software .bin package is also a valid operational method when the image is copied to the device and installed locally, particularly for controlled or recovery-style maintenance.
Option B is not the best answer for already deployed branch upgrades because the Preferred Software Version field applies to zero-touch provisioning; Versa states that during ZTP, Director upgrades a branch to the preferred version if applicable. That setting influences onboarding behavior, not the normal upgrade workflow for already deployed branches. Option D is incorrect because System > Director Upgrade is used to upgrade the Versa Director node itself, not VOS branch appliances.
NEW QUESTION # 55
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: C
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 56
A VOS branch has two WAN circuits. You suspect the configured transport domain mapping is wrong because one link is not building the expected SD-WAN path. Which VSM control-plane command is most useful to check local WAN circuit information, transport domains, NAT status, and local tunnel-site details?
Answer: C
Explanation:
The correct answer is A . Versa SD-WAN data-path troubleshooting documentation instructs administrators to connect to the VSM control plane with vsh connect vsmd and then use show vsm p2mp local-tunnel-sites 0 to check the status of local site objects. The example output includes the local site key, neighbor IP, site type, site name, branch ID, tenant ID, and detailed WAN link information. It also shows fields such as WAN local VRF ID, WAN local link name, circuit information, link ID, behind-NAT status, shaping rate, public and private addresses, link flags, transport domain, and SLA interval.
This command is therefore highly relevant when validating whether the local SD-WAN site has learned and built the correct WAN transport objects for overlay tunnel creation. If a circuit is mapped to the wrong transport domain or has incorrect NAT/public/private address state, the local-tunnel-site output is one of the best places to confirm it.
The other commands are useful for software version, CGNAT summary, or CPU usage, but they do not show the detailed SD-WAN local tunnel-site transport mapping.
NEW QUESTION # 57
Examine the exhibit below.
Which two statements correctly explain the routing shown in the exhibit. (Choose two.)
Answer: B,D
Explanation:
The correct answers are A and C . The route table shown in the Versa SD-WAN design documentation includes a default route, 0.0.0.0/0 , with next hop 169.254.0.2 and exit interface tvi-0/603.0 . A default route is used when no more specific route exists in the routing table, so any unknown IPv4 unicast destination will follow that active default route through the tvi-0/603 interface. This directly supports option C.
The same design context describes local or central internet breakout, where Director workflows create TVI- based connectivity for breakout or gateway-style forwarding. In Versa SD-WAN, TVI interfaces are commonly used as internal virtual tunnel interfaces between routing instances, such as between a tenant LAN VR and a transport or breakout VR. The documentation also describes virtual TVI interface pairs being created by Director workflows between VRs for gateway routing use cases. Therefore, option A is also correct: tvi-0/603 is paired with another interface in another VR to support the default-route forwarding path.
The IP address is not shown as misconfigured; 169.254.x.x addressing is commonly used for point-to- point internal TVI links. The route is also not a blackhole route, because it has an active next hop and an exit interface.
NEW QUESTION # 58
......
With three versions of products, our VNX301 learning questions can satisfy different taste and preference of customers with different use: PDF & Software & APP versions. Without ambiguous points of questions make you confused, our VNX301 practice materials can convey the essence of the content suitable for your exam. With the most scientific content and professional materials VNX301 Preparation materials are indispensable helps for your success. Such a valuable acquisition priced reasonably is offered before your eyes, you can feel assured to take good advantage of.
VNX301 Valid Test Preparation: https://www.itcerttest.com/VNX301_braindumps.html
What's more, part of that Itcerttest VNX301 dumps now are free: https://drive.google.com/open?id=1CGfX9WZZGnwG85cObHRs988ZCMYXNyIb