さらに、Tech4Exam H35-580_V2.0ダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1Yk__hKdvABSUpErHsH9jEBLmDayScTHI
H35-580_V2.0試験に問題がある場合は、無料のデモを検討してください。弊社の最新のH35-580_V2.0試験トレントは、この業界では完璧な模範であり、さまざまな程度の試験受験者向けの明確なコンテンツに満ちています。最新のH35-580_V2.0試験トレントの結果は驚くほど驚くべきもので、試験受験者の98％以上が目標を無事に達成しました。また、H35-580_V2.0テストダンプにより、あらゆる種類の教材の精度が非常に高いことが保証されました。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Fundamentals of 5G Network Optimization | 30% | - Network Optimization Process and Methods - Interference Optimization - Coverage Optimization - Mobility Optimization - Performance Monitoring and Evaluation Indicators - Capacity and Throughput Optimization |
| Topic 2: 5G Wireless Network Principles | 20% | - 5G NR Overview and Key Technologies - 5G NR Mobility and Power Control - 5G NR Channels and Signals - 5G NR Frame Structure and Physical Resources |
| Topic 3: Fundamentals of 5G Network Planning | 20% | - Site Survey and Design - Capacity and Interference Planning - 5G Network Planning Process and Principles - Parameter Planning and Configuration - Wireless Environment Analysis and Coverage Planning |
| Topic 4: 5G Base Station Overview and Basic Operations | 10% | - 5G Base Station Installation and Deployment - 5G Base Station Products and Hardware Composition - 5G Base Station Maintenance and Fault Handling - 5G Base Station Configuration and Commissioning |
| Topic 5: Basic Features of 5G Wireless Networks | 20% | - Beam Management and Optimization - 5G QoS and Slicing - Flexible Duplex and Spectrum Sharing - Massive MIMO Technology |
Tech4Exam はプロなウェブサイトで、受験生の皆さんに質の高いサービスを提供します。プリセールス.サービスとアフターサービスに含まれているのです。Tech4ExamのHuaweiのH35-580_V2.0試験トレーニング資料を必要としたら、まず我々の無料な試用版の問題と解答を使ってみることができます。そうしたら、この資料があなたに適用するかどうかを確かめてから購入することができます。Tech4ExamのHuaweiのH35-580_V2.0試験トレーニング資料を利用してから失敗になりましたら、当社は全額で返金します。それに、一年間の無料更新サービスを提供することができます。
質問 # 43
How many RBs are included when a bandwidth of 100 MHz and a subcarrier spacing of 60 kHz are used in a
5G cell?
正解：D
解説：
Explanation
To find the number of RBs in a 5G cell, we need to know the bandwidth and the subcarrier spacing of the cell.
The bandwidth is the total frequency range allocated for the cell, while the subcarrier spacing is the frequency separation between adjacent subcarriers in the cell. A RB is a group of 12 consecutive subcarriers in the frequency domain 12. Therefore, the number of RBs in a 5G cell can be calculated by dividing the bandwidth by the product of the subcarrier spacing and 12.
Given that the bandwidth is 100 MHz and the subcarrier spacing is 60 kHz, we can use the following formula to find the number of RBs:
Number of RBs = Bandwidth / (Subcarrier spacing * 12) Number of RBs = 100 MHz / (60 kHz * 12) Number of RBs = 100000 kHz / 720 kHz Number of RBs = 138.888...
However, since the number of RBs must be an integer, we need to round it down to the nearest multiple of
3 3. This is because the NR standard defines different frequency ranges for different subcarrier spacings, and each frequency range has a minimum and maximum number of RBs that are multiples of 3 4. For example, for subcarrier spacing of 60 kHz, the frequency range is from 24250.08 MHz to 52600.08 MHz, and the minimum and maximum number of RBs are 66 and 273, respectively.
Therefore, the closest multiple of 3 to 138.888... is 135. However, this number is not valid because it is lower than the minimum number of RBs for subcarrier spacing of 60 kHz. The next valid multiple of 3 is 273, which is also the maximum number of RBs for subcarrier spacing of 60 kHz. Therefore, the correct answer is C. 273.
質問 # 44
Which of the following problems may cause SCTP link disconnection over the N2 interface?(Select All that Apply)
正解：A、B、C、D
解説：
Explanation
According to the Troubleshooting Guide for Huawei 5G Base Stations, the possible causes of SCTP link disconnection over the N2 interface are as follows:
Routes are not configured: If the routes between the base station and the core network are not configured correctly, the SCTP link cannot be established or may be disconnected.
PLMN configurations are incorrect: If the PLMN configurations on the base station and the core network do not match, the SCTP link cannot be established or may be disconnected.
Physical ports are faulty: If the physical ports on the base station or the core network are faulty, such as damaged cables, loose connectors, or port errors, the SCTP link cannot be established or may be disconnected.
The SCTP port configuration is incorrect: If the SCTP port configuration on the base station or the core network is incorrect, such as using a reserved port number or a conflicting port number, the SCTP link cannot be established or may be disconnected.
質問 # 45
In the downlink channel configuration in RAN3.0 version, what is the maximum power offset?
正解：A
解説：
The maximum configurable downlink channel power offset in RAN3.0 is 15 dB.
質問 # 46
In downlink peak rate testing, the modulation and coding scheme (MCS) index must reach 32.
正解：A
解説：
Explanation
According to the HCIA-5G V2.0 Exam Outline, in downlink peak rate testing, the modulation and coding scheme (MCS) index must reach 32, which corresponds to option A.
質問 # 47
In downlink detection, what is the PDCCH BLER synchronization threshold Qin?
正解：A
解説：
The target PDCCH BLER threshold Qin is typically configured as 10% (0.1) to balance control channel reliability and resource utilization.
質問 # 48
......
HCIA-5G-RNP&RNO V2.0の調査の質問は、より専門的な質の高いサービスをユーザーにもたらすことができます。私たちのH35-580_V2.0学習教材はユーザーに自信を与え、感情に強く依存します。ユーザーはH35-580_V2.0試験で受験者に同行するため、候補者は学習コンテンツだけでなく、教えることだけでなく、彼の困難な困難なヘルパーを共有しているので、私たちを信じて、私たちはとても専門的な会社です。これで、H35-580_V2.0テストガイドのデモを無料でダウンロードして、詳細を理解できます。
H35-580_V2.0模擬対策問題: https://www.tech4exam.com/H35-580_V2.0-pass-shiken.html
P.S.Tech4ExamがGoogle Driveで共有している無料の2026 Huawei H35-580_V2.0ダンプ：https://drive.google.com/open?id=1Yk__hKdvABSUpErHsH9jEBLmDayScTHI