いまJuniperのJN0-352認定試験に関連する優れた資料を探すのに苦悩しているのですか。もうこれ以上悩む必要がないですよ。ここにはあなたが最も欲しいものがありますから。受験生の皆さんの要望に答えるように、GoShikenはJN0-352認定試験を受験する人々のために特に効率のあがる勉強法を開発しました。受験生の皆さんはほとんど仕事しながら試験の準備をしているのですから、大変でしょう。試験に準備するときにはあまり多くの時間を無駄にすることを避けるように、GoShikenは短時間の勉強をするだけで試験に合格することができるJN0-352問題集が用意されています。この問題集には実際の試験に出る可能性のあるすべての問題が含まれています。従って、この問題集を真面目に学ぶ限り、JN0-352認定試験に合格するのは難しいことではありません。
| Section | Weight | Objectives |
|---|---|---|
| Layer 2 Switching and VLANs | 15-20% | - VLAN concepts, configuration, trunking and tagging - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration - Link Aggregation Groups (LAG) and Virtual Chassis |
| High Availability and Resiliency | 5-10% | - Network resiliency design and troubleshooting - Redundancy protocols and failover mechanisms - Graceful restart and non-stop routing |
| IS-IS | 10-15% | - Adjacency establishment, levels and metrics - Configuration and route exchange - Scalable enterprise deployment and troubleshooting |
| Layer 2 Security | 10-15% | - Port security, MAC limiting and storm control - Layer 2 firewall filters and security features - DHCP snooping, Dynamic ARP Inspection and IP Source Guard |
| BGP | 15-20% | - Neighbor relationships and session establishment - Route advertisement, attributes and path selection - Routing policies, filtering and common troubleshooting |
| IP Multicast | 5-10% | - IGMP operation and configuration - Multicast routing monitoring and troubleshooting - PIM Dense Mode, Sparse Mode and RP mechanisms |
| OSPF | 15-20% | - Route summarization and redistribution - Configuration, verification and troubleshooting - Neighbor formation, area design and LSA types |
| Tunnels and Overlays | 5-10% | - Tunnel types, encapsulation and operation - Overlay network design and connectivity - GRE, IP-IP and dynamic tunnel configuration |
| Protocol Independent Routing | 10-15% | - Basic routing policy and filter operation - Routing tables, static routes and route preference - Routing instances and route selection criteria |
記録に便利なように原稿に印刷されたJuniperのJN0-352試験問題をすばやく学習したい場合は、JN0-352ガイドトレントの模擬模擬テストを選択できます。 GoShiken学習効果をタイムテストし、JN0-352学習クイズでソフトウェアモデルを提供します。実際のテスト環境で問題と速度を解決する能力を発揮するのに役立ちます。 最後に、他の電子機器で練習したい場合は、オンライン版を使用してJN0-352練習資料を選択できます。
質問 # 121
Which command solves the error that you see in the exhibit?
正解：A
解説：
The error in the exhibit occurs because an access interface can only be a member of one VLAN, but it is currently configured with the "default" VLAN and is trying to be added to VLAN "v11." To resolve the issue, the correct command is:
delete ge-0/0/2 unit 0 family ethernet-switching vlan members default
This command removes the interface from the "default" VLAN, allowing it to be part of VLAN
"v11" as intended.
質問 # 122
Which two elements are used to create the STP bridge ID? (Choose two.)
正解：B、C
質問 # 123
Your switches are managed using Junos Space Network Director. You want to secure the switches using a Network Director filter profile. A filter profile containing one term shown in the exhibit is deployed to ports on managed devices.
Which traffic will be accepted by the filter?
正解：B
質問 # 124
You are an operator for a network running IS-IS. Two routers are failing to form an adjacency.
What are two reasons for this problem? (Choose two.)
正解：A、D
解説：
The two reasons for the failure to form an adjacency in a network running IS-IS could be:
B) There is no configured ISO address on any IS-IS interface. IS-IS requires each router interface to have an ISO address configured. Without this address, the routers cannot form an adjacency.
D) The family iso configuration is missing from the adjacency interface. The 'family iso' configuration is essential for IS-IS to function correctly. If this configuration is missing from the adjacency interface, it could prevent the formation of an adjacency.
These explanations are based on the Enterprise Routing and Switching Specialist (JNCIS-ENT) documents and learning resources available at Juniper Networks.
質問 # 125
Refer to Exhibit:
R1 is not responding to ICMP requests sent to the VIP address.
Referring to the exhibit, which command option would you configure on the virtual address to correct this problem?
正解：A
解説：
In this configuration, R1's physical interface address (10.10.10.1) is different from the VRRP virtual IP address (10.100.100.1), meaning R1 is operating as a non-owner VRRP master - it did not originate the virtual address as one of its own real interface addresses. By default, Junos VRRP masters that do not own the virtual address will forward transit traffic destined through that address but will not process or respond to traffic addressed directly to the VIP itself, such as ICMP echo requests, Telnet, or SSH sessions aimed at
10.100.100.1. This is deliberate default behavior intended to prevent ambiguity about which physical device is answering on behalf of a shared virtual identity. To allow the master to accept and respond to packets whose destination is the virtual address itself, the accept-data statement must be explicitly configured under the vrrp- group hierarchy. Once enabled, the elected master will process locally destined traffic sent to the VIP, resolving exactly the symptom described. The track option is used for interface or route-based priority adjustment to influence mastership, advertise-interval tunes the frequency of VRRP hello advertisements, and no-preempt prevents a higher-priority router from reclaiming mastership once a lower-priority router has taken over - none of these affect whether the master processes traffic destined to the VIP. Reference topics:
Junos Enterprise Routing - High Availability, VRRP accept-data Behavior.
質問 # 126
......
GoShikenのJuniperのJN0-352試験トレーニング資料を手に入れたら、我々は一年間の無料更新サービスを提供します。それはあなたがいつでも最新の試験資料を持てるということです。試験の目標が変わる限り、あるいは我々の勉強資料が変わる限り、すぐに更新して差し上げます。あなたのニーズをよく知っていていますから、あなたに試験に合格する自信を与えます。
JN0-352的中合格問題集: https://www.goshiken.com/Juniper/JN0-352-mondaishu.html