Latest Huawei H35-831 Dumps Ebook | H35-831 Test Labs

Compared with the education products of the same type, some users only for college students, some only provide for the use of employees, these limitations to some extent, the product covers group, while our H35-831 study guide materials absorbed the lesson, it can satisfy the different study period of different cultural levels of the needs of the audience. For example, if you are a college student, you can study and use online resources through the student column of our H35-831 learning guide, and you can choose to study our H35-831 exam questions in your spare time.

Huawei H35-831 Exam Syllabus Topics:

SectionWeightObjectives
Network Orchestration & Automation2%- SDN and controller architecture
- iMaster NCE overview
Tunnel Technologies15%- SR-MPLS and SRv6
- TE and traffic engineering
- MPLS fundamentals
Cloud Bearer Network8%- Cloud service bearer requirements
- DC interconnect technologies
- Cloud interconnection architecture
IP Mobile Backhaul10%- 5G/4G backhaul architecture
- Service isolation and QoS
- Synchronization and timing
Advanced Routing Protocols15%- BGP and MP-BGP
- IS-IS advanced features
- OSPF advanced features
- Route control and fast convergence
High Reliability8%- Fast protection switching
- Network redundancy mechanisms
- Fault detection and recovery
Multicast Protocols6%- PIM-SM/SSM
- MSDP and anycast RP
- Multicast QoS
Backbone Network Planning8%- Capacity and traffic planning
- Architecture design
- Scalability design
Automatic O&M2%- Monitoring and analysis
- Fault management
VPN Technologies15%- EVPN and VXLAN
- MPLS L3VPN
- VPN deployment and troubleshooting

>> Latest Huawei H35-831 Dumps Ebook <<

Real Huawei H35-831 Dumps PDF Format

If you are sure that you want to pass Huawei certification H35-831 exam, then your selecting to purchase the training materials of ActualVCE is very cost-effective. Because this is a small investment in exchange for a great harvest. Using ActualVCE's test questions and exercises can ensure you pass Huawei Certification H35-831 Exam. ActualVCE is a website which have very high reputation and specifically provide simulation questions, practice questions and answers for IT professionals to participate in the Huawei certification H35-831 exam.

Huawei HCIE-Datacom-Carrier (Written) V1.0 Sample Questions (Q51-Q56):

NEW QUESTION # 51
iFIT is an in-band flow-measurement technology that delivers highly precise performance measurements based on real traffic. Which functions can it provide when used with telemetry, a second-level data-collection technology, and NCE, an integrated management and control platform?
Select all that apply.

Answer: B,C,D

Explanation:
Exact Extract - Huawei Training Material (Automatic SDN Network O & M, p.52):
"iFIT is a performance detection method for in-service traffic detection. It provides high-precision real-time traffic detection and works with the Telemetry second-level data collection to implement real-time visualization of network quality, proactive monitoring, and quick fault demarcation and locating." Huawei Reference Verification:
Huawei's Automatic SDN O & M module characterizes iFIT as in-service flow performance detection using high-precision real-traffic measurement and second-level telemetry. It specifically lists real-time visualization of network quality, proactive monitoring, and quick fault demarcation and location. iFIT-enabled forwarding hardware identifies measured flows, counts packets and records time information to calculate delay and loss.
iMaster NCE-IP correlates these records across network nodes to present service-level performance and identify the faulty section. Network redundancy protection is a separate function associated with protection mechanisms rather than measurement. Accordingly B, C and D are correct.
Technical Deep Dive:
B, C and D are correct. iFIT works on real production flows rather than relying entirely on synthetic probing, which may not follow the same forwarding path as customer traffic. Ingress and downstream measurement points record packet counts and timestamps. Comparing samples across hops supports fault demarcation, while telemetry sends near-real-time records to iMaster NCE-IP for SLA visualization and proactive abnormality detection. Packet-loss rate is calculated as (Tx-Rx)/Tx, using corresponding observation windows and matched flows. Supported forwarding NP/ASIC functions implement flow identification and statistical operations at high throughput. The controller can use observed packet loss, delay or jitter to inform tunnel optimization or self-healing workflows. But iFIT itself does not provide the alternate link, replicated forwarding state or local FRR operation necessary for redundancy. Mechanisms such as TI-LFA, VPN FRR or hot standby provide protection; iFIT supplies the visibility required to detect and localize degradation.
#######################################################


NEW QUESTION # 52
The new metro network is built with modular, standardized components. It is designed for fixed-mobile convergence (FMC) and cloud-network integration requirements, and it enables flexible network expansion, rapid service provisioning, and network intelligence.

Answer: A

Explanation:
Huawei Reference Verification:
Huawei's official CloudMetro solution architecture describes a metropolitan network built around a Network Cloud Engine (NCE) and an underlying bearer infrastructure capable of providing differentiated end-to-end network services. The design separates functional modules, cloud operating systems, and physical forwarding resources into independently manageable layers. Service management and network-resource control are centralized, while modular network functions can be orchestrated according to subscriber and application requirements. This approach enables flexible resource scheduling, automated provisioning, simplified service deployment, and more efficient operations and maintenance. These capabilities substantiate the statement that the new metro network supports flexible expansion, fixed-mobile convergence, cloud-network integration, and intelligent service management.
Technical Deep Dive:
The statement is TRUE because modern carrier metro networks are evolving from device-centric architectures to service-oriented and programmable transport infrastructures. Traditional metro designs often combine subscriber management, service processing, and forwarding in individual physical devices, creating complexity when expanding capacity or adding services. CloudMetro addresses these limitations using functional modularization, control and forwarding separation, and centralized service orchestration. Fixed- mobile convergence enables residential broadband, enterprise VPNs, and mobile backhaul to share common transport resources while maintaining separate VPN and QoS policies. Cloud-network integration supports coordinated allocation of compute, storage, and connectivity. Rather than manually configuring each device, network functions and connectivity can be provisioned through centralized policies. On supported NetEngine platforms, forwarding processors and ASICs perform IP lookups, MPLS label operations, ACL matching, classification, and QoS scheduling. Combining modularity, high-performance hardware forwarding, and centralized service control provides rapid service activation, predictable scaling, and lower operational complexity.
#######################################################


NEW QUESTION # 53
Assume Flex-Algo is configured on a device and a tunnel policy is set for the device to preferentially select a Flex-Algo-based SR-MPLS BE tunnel. Under which of the following conditions would a VPN route recurse to the Flex-Algo-based SR-MPLS BE tunnel?
Select all that apply.

Answer: A,C

Explanation:
Huawei Reference Verification:
Huawei uses a BGP Color Extended Community to associate service routes with transport characteristics and a BGP next-hop address to identify the transport destination. A tunnel policy can prefer SR-MPLS Best Effort tunnels calculated using Flex-Algo. The service route's color identifies the desired algorithm or constrained transport slice, and the next hop identifies the endpoint that the tunnel must reach. The Flex-Algo algorithm ID defines how the routing topology is calculated, while link affinity influences eligible links within that algorithm. Color and BGP next hop are the route-level recursion matching information; accordingly B and C are correct.
Technical Deep Dive:
B and C are correct. A Flex-Algo definition builds a separate constrained SPF topology using algorithm- specific attributes such as metrics and administrative group restrictions. Tunnel policies can map service colors to appropriate Flex-Algo paths. When a VPN route arrives, its BGP Color Extended Community describes the desired transport behavior, and its next-hop address identifies the remote PE or tunnel endpoint.
The device matches that pair against eligible tunnels and installs the resulting forwarding recursion. Affinity (A) can control which physical links participate in the algorithm-specific topology, but is not the route's direct matching attribute. Algorithm ID (D) identifies the computation algorithm rather than independently defining the BGP route recursion key. After resolution, forwarding NP/ASIC hardware applies the programmed SR- MPLS labels and next-hop group. This separation allows a carrier to provide differentiated transport characteristics without manually defining an explicit LSP for every VPN route.
#######################################################


NEW QUESTION # 54
Which of the following statements are true regarding multicast packets in a BIERv6 multicast network?
Select all that apply.

Answer: A,D

Explanation:
Huawei Reference Verification:
Huawei BIERv6 maps receiver BFR-IDs into BitStrings divided into sets according to the BitString length. A single multicast service may have receivers whose BFR-IDs belong to more than one set. The ingress BFIR must create set-specific copies with the matching Set Identifier and BitString. Because several sets may share part of the forwarding topology, multiple copies of the same multicast flow can traverse the same physical link. This makes B and D true, while the statements that receivers must share one set or that only one copy can traverse a link are incorrect.
Technical Deep Dive:
B and D are correct. A BIERv6 BitString indicates target receiver BFR-IDs within a set. If receiver numbering or scale exceeds one set's capacity, traffic is represented by multiple set-specific packets. A BFIR creates the necessary copies and each carries the proper set number and BitString; forwarding nodes replicate according to their BIFT. Paths for different sets can overlap, so two or more copies of the same multicast payload may traverse a shared link. This differs from the simplified expectation that a multicast forwarding tree always carries exactly one copy per link. BFR-ID planning is important because efficient allocation can reduce unnecessary duplicated packets and optimize bandwidth usage. Destination sets permit scalability without arbitrarily large per-packet BitStrings. The forwarding hardware uses the set and bit information to select the next-hop fan-out.
#######################################################


NEW QUESTION # 55
In an EVPN VXLAN solution, which of the following features can be enabled to reduce ARP packet flooding between VTEPs?
Select all that apply.

Answer: A,C,D

Explanation:
Huawei Reference Verification:
Huawei EVPN VXLAN provides ARP optimization through local proxy ARP, host-information collection and ARP broadcast suppression. The VTEP learns or imports IP-to-MAC mappings, which can be distributed through EVPN MAC/IP routes. When the destination mapping is known, the VTEP may answer ARP requests locally rather than flooding the request to remote VTEPs. ARP suppression similarly limits broadcasts when suitable host reachability information exists. Interface isolation restricts endpoint communication but does not independently supply the IP/MAC resolution or flood-suppression mechanism.
Thus A, B and C are applicable.
Technical Deep Dive:
A, B and C reduce unnecessary ARP flooding. A local proxy responds to known requests using cached or learned IP/MAC bindings. Host-information collection populates and distributes the information that makes local resolution possible, often through EVPN Type 2 routes. ARP broadcast suppression prevents unnecessary network-wide ARP replication when the gateway already knows the relevant destination host binding. These mechanisms reduce overhead in large tenant VXLAN overlays with many VTEPs. Interface isolation serves a different purpose: preventing or restricting communication between endpoints on specified interfaces. Depending on Huawei platform and BD mode, `arp l2-proxy enable` and `arp broadcast-suppress enable` may be mutually exclusive within the same bridge domain; the question asks which mechanisms can reduce flooding, not whether all must run simultaneously. Representative commands include `bridge-domain
10`, `arp broadcast-suppress enable`, and `arp l2-proxy enable` in compatible configurations.
#######################################################


NEW QUESTION # 56
......

Huawei provides the most reliable and authentic Huawei H35-831 Exam prep material there is. The 3 kinds of Huawei H35-831 Preparation formats ensure that there are no lacking points in a student when he attempts the actual H35-831 exam.

H35-831 Test Labs: https://www.actualvce.com/Huawei/H35-831-valid-vce-dumps.html