BONUS!!! Download part of Test4Engine SRAN-Radio-Network-Performance-Optimization dumps for free: https://drive.google.com/open?id=1a3Taab9xR07l4B9ewea1nAh0gQ-NPVsu
Whatever may be the reason to leave your job, if you have made up your mind, there is no going back. By getting the Nokia SRAN-Radio-Network-Performance-Optimization Certification, you can avoid thinking about negative things, instead, you can focus on the positive and bright side of taking this step and find a new skill set to improve your chances of getting your dream job.
| Section | Weight | Objectives |
|---|---|---|
| Mobility and Handover Optimization | 20% | - Inter-RAT mobility and optimization - Handover parameters and algorithms - Mobility robustness and optimization |
| Coverage and Capacity Optimization | 30% | - Coverage analysis, tuning and optimization - Interference analysis and mitigation techniques - Capacity planning, load balancing and optimization |
| Quality of Service and Resource Management | 15% | - QoS parameters, scheduling and admission control - Radio resource management and optimization |
| SRAN Performance Optimization Fundamentals | 25% | - Performance optimization principles and methodology - Key performance indicators (KPIs) definition and measurement - Network performance monitoring and analysis tools |
| Advanced Optimization and SON Features | 10% | - Energy saving and advanced features - Self-Organizing Networks (SON) use cases and optimization |
>> SRAN-Radio-Network-Performance-Optimization Free Download <<
Our SRAN-Radio-Network-Performance-Optimization learning materials are new but increasingly popular choices these days which incorporate the newest information and the most professional knowledge of the practice exam. All points of questions required are compiled into our SRAN-Radio-Network-Performance-Optimization Preparation quiz by experts. By the way, the SRAN-Radio-Network-Performance-Optimizationcertificate is of great importance for your future and education. Our SRAN-Radio-Network-Performance-Optimization practice materials cover all the following topics for your reference.
NEW QUESTION # 18
The slice type SST value for Extreme Broadband is typically:
Answer: B
Explanation:
The correct answer is B .
In 5G network slicing, SST means Slice/Service Type . It identifies the high-level service category of a network slice.
Typical standardized SST values are:
SST = 1 # eMBB, enhanced Mobile Broadband
SST = 2 # URLLC, Ultra-Reliable Low-Latency Communication
SST = 3 # MIoT/mMTC, Massive IoT or massive Machine Type Communication
SST = 4 # V2X-related slice type
"Extreme Broadband" is normally aligned with eMBB , because it refers to high data rate, high capacity, and broadband user experience.
Therefore, the SST value for Extreme Broadband is:
1.
NEW QUESTION # 19
Which port must be opened in NetAct for the connection from TraceSynthesis to NetAct?
Answer: C
Explanation:
The correct answer is B .
The connection from TraceSynthesis to NetAct is typically based on secure web/API communication, which uses HTTPS . The standard HTTPS port is 443 . Therefore, port 443 must be opened in NetAct/firewall rules to allow TraceSynthesis to communicate with NetAct.
The other options are not the best answer:
8443 is often used as an alternative HTTPS/application-server port, but it is not the standard answer here.
22 is used for SSH, mainly for secure shell access or file transfer.
8080 is commonly used for unsecured HTTP or proxy/application access, not the secure NetAct connection expected here.
So the required port is:
443.
NEW QUESTION # 20
In a 5G NSA Option 3x deployment, why should we not define 5G neighbors in LTE sectors where there is no 5G coverage ?
Answer: B
Explanation:
The correct answer is A .
In 5G NSA Option 3x , LTE acts as the Master Cell Group , and NR acts as the Secondary Cell Group , usually added through EN-DC . If 5G NR neighbors are configured in an LTE sector where there is actually no 5G coverage , the LTE eNB may still configure the UE to perform NR measurements.
To perform NR inter-RAT or inter-frequency measurements, the UE may require measurement gaps .
During these gaps, the UE stops normal LTE reception/transmission activities to measure NR frequencies. If there is no real 5G coverage, those gaps become wasted measurement time and can reduce LTE user throughput.
Option B is not the best answer because if there is no 5G coverage, the main issue is not successful SCG addition or handover degradation, but unnecessary measurement activity. Option C is also not correct because redirection from 5G to 4G normally occurs when the UE is already on or connected to 5G coverage, which is not the case here.
Therefore, the main reason is:
LTE throughput degradation due to unnecessary measurement gap configuration.
NEW QUESTION # 21
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?
Answer: C
Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.
NEW QUESTION # 22
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.
Answer: D
Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.
NEW QUESTION # 23
......
We have a group of experts dedicated to the SRAN-Radio-Network-Performance-Optimization exam questions for many years. And the questions and answers of our SRAN-Radio-Network-Performance-Optimization practice materials are closely related with the real exam. Besides, they constantly keep the updating of products to ensure the accuracy of questions. All SRAN-Radio-Network-Performance-Optimization Actual Exams are 100 percent assured. Besides, we price the SRAN-Radio-Network-Performance-Optimization actual exam with reasonable fee without charging anything expensive.
SRAN-Radio-Network-Performance-Optimization Authorized Exam Dumps: https://www.test4engine.com/SRAN-Radio-Network-Performance-Optimization_exam-latest-braindumps.html
2026 Latest Test4Engine SRAN-Radio-Network-Performance-Optimization PDF Dumps and SRAN-Radio-Network-Performance-Optimization Exam Engine Free Share: https://drive.google.com/open?id=1a3Taab9xR07l4B9ewea1nAh0gQ-NPVsu