350-101최고품질덤프데모다운 & 350-101인증덤프공부

Cisco인증 350-101시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. PassTIP에서 연구제작한 Cisco인증 350-101덤프는Cisco인증 350-101시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. PassTIP덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은PassTIP가 지켜드립니다.

Cisco 350-101 시험요강:

주제소개
주제 1
  • Wireless Network Operation: Covers initial configuration of Cisco wireless infrastructure, AP discovery and join processes, AP modes, WLAN setup, and client management policies across platforms like Catalyst Center, ISE, and Spaces.
주제 2
  • Client Connectivity Configuration: Covers configuring authentication both on and off the controller, setting up client connectivity across different operating systems, roaming behavior, and wireless guest network configuration.
주제 3
  • Wireless Network Implementation: Covers Cisco wireless deployment architectures (Fabric, Mesh, Local, Cloud), physical infrastructure setup, and configuring management access for APs, WLCs, and dashboards.

>> 350-101최고품질 덤프데모 다운 <<

350-101인증덤프공부 & 350-101시험대비

최근 IT 업종에 종사하는 분들이 점점 늘어가는 추세하에 경쟁이 점점 치열해지고 있습니다. IT인증시험은 국제에서 인정받는 효력있는 자격증을 취득하는 과정으로서 널리 알려져 있습니다. PassTIP의 Cisco인증 350-101덤프는IT인증시험의 한 과목인 Cisco인증 350-101시험에 대비하여 만들어진 시험전 공부자료인데 높은 시험적중율과 친근한 가격으로 많은 사랑을 받고 있습니다.

최신 CCIE Wireless 350-101 무료샘플문제 (Q87-Q92):

질문 # 87
A wireless engineer wants to analyze over-the-air 802.11 frames without servicing clients. Which AP mode should be configured?

정답：C

설명：
Sniffer mode converts an AP into a dedicated packet capture device that forwards 802.11 frames to a protocol analyzer such as Wireshark. This mode is commonly used for troubleshooting wireless issues. Local and FlexConnect modes continue servicing wireless clients instead.


질문 # 88
A network engineer has been tasked with migrating the management mode of a Cisco 9176 AP named "Cisco- AP053540555" in a large enterprise wireless deployment. The AP is currently managed by a Cisco Catalyst
9800 Series WLC, but the organization is transitioning to Meraki cloud management for centralized control and monitoring. To complete this migration, the engineer needs to change the AP's management mode to Meraki with force and noprompt to skip validations using the CLI on the wireless controller. What command must the engineer use?

정답：A

설명：
Migrating a Cisco Catalyst AP to Meraki cloud management requires issuing a specific CLI command on the WLC to switch the AP's management mode. The correct syntax isap management mode meraki force noprompt, which instructs the controller to transition the AP to Meraki mode, bypassing validation prompts that normally require manual confirmation. Theforcekeyword ensures the command is executed even if the AP is actively associated or configured, andnopromptsuppresses confirmation dialogues for unattended migration. Options A, C, and D are invalid syntax or improperly order the parameters, which would result in a CLI error. Cisco Wireless Core Technologies recommend this approach during enterprise migration scenarios where multiple APs are moved from Catalyst WLC management to cloud-based Meraki management, enabling centralized configuration and monitoring in a large-scale deployment. Using this command ensures a seamless transition without service disruption, while maintaining inventory consistency and supporting automation for mass AP migrations. Reference topics:Wireless Network Implementation - AP management mode migration, Meraki cloud integration, CLI AP management, Catalyst 9176 WLC migration.


질문 # 89
In an RF environment, what does high interference result in?

정답：A

설명：
The correct answer is B. inconsistent channel performance . In WLAN RF design, interference is unwanted RF energy in the same or adjacent frequency space that reduces the usable quality of a channel. Cisco defines interference as unwanted RF signals in the same frequency band that can cause degradation or loss of service.
When interference increases, the channel becomes less predictable: clients and APs experience higher contention, more retries, lower modulation rates, reduced throughput, and unstable latency.
Cisco also notes that overlapping channels can create RF interference, leading to connectivity issues and poor throughput. In co-channel interference scenarios, adjacent radios on the same channel interfere with network performance through collisions or excessive CSMA deferrals, degrading WLAN performance. This directly maps to inconsistent channel performance because the channel may appear usable at one moment and congested or impaired the next.
The other answers are not the best operational result. Frame aggregation may be impacted indirectly, but it is not the primary RF-level outcome. Scheduled contention access is not caused by interference. Extended coverage patterns are related to antenna gain, transmit power, and propagation, not high interference.
Reference topic: RF Fundamentals - interference, channel utilization, co-channel interference, adjacent-channel interference, retries, and WLAN performance degradation.


질문 # 90
A persistent network issue is impacting connectivity for workstations in a training lab when connecting to a lab SSID. Wireless logs show clients never receive a DHCP offer when trying to obtain an IP address. The APs are operating in Local mode. Network monitoring systems indicate optimal signal quality and radio performance, VLAN assignments for the affected SSID have been configured, and all clients are affected. Which action resolves the issue?

정답：A

설명：
The fault domain is DHCP forwarding, not RF, client-side addressing, or AP discovery. Cisco explains that when a wireless client associates, it sends a DHCP Discover broadcast, and depending on AP mode, that traffic is either forwarded through the WLC or passed to the next hop. Cisco further states that if no DHCP server exists in the client's local Layer 2 domain, the router or SVI for the client VLAN must forward DHCP discovery traffic using an IP helper address.
Because the APs are in Local mode, client traffic is centrally switched through CAPWAP to the WLC, where the client VLAN/SVI path must correctly relay DHCP toward the DHCP server.
Cisco's Catalyst 9800 DHCP configuration guide shows DHCP relay configuration under the client VLAN SVI by entering the IPv4 helper address, and the CLI example uses ip helper- address <ip-address> to forward UDP broadcasts such as DHCP requests.
Option C resolves the issue because all clients are affected and none receive a DHCP offer, indicating the DHCP Discover is not reaching the DHCP server or the offer is not returning through the relay path. DHCP option 43 is for AP controller discovery, not client DHCP addressing.


질문 # 91
Refer to the exhibit. An engineer configured a static IP address on a LWAPP, but it is not reachable for management. The engineer configured the wrong gateway and must now change the default gateway to 172.16.100.1. Which CLI command must the engineer use?

정답：D

설명：
When deploying a Lightweight Access Point (LWAPP) in a Cisco wireless network, proper Layer
3 configuration is essential for management and connectivity to the Wireless LAN Controller (WLC). Each LWAPP requires a valid IP address, subnet mask, and default gateway to communicate beyond its local subnet. In the exhibit, the AP is assigned 172.16.100.104/24, but the previously configured gateway was incorrect, preventing communication with the WLC. Cisco IOS XE requires that the AP's IP interface be configured with the correct default gateway to route traffic properly. The correct syntax is capwap ap ip <AP-IP> <Subnet-Mask> <Default-Gateway>.
Option D matches the IP, subnet mask, and gateway for the given network, ensuring the AP can reach the WLC for LWAPP registration.


질문 # 92
......

우리 PassTIP에서는 여러분을 위하여 정확하고 우수한 서비스를 제공하였습니다. 여러분의 고민도 덜어드릴 수 있습니다. 빨리 성공하고 빨리Cisco 350-101인증시험을 패스하고 싶으시다면 우리 PassTIP를 장바구니에 넣으시죠 . PassTIP는 여러분의 아주 좋은 합습가이드가 될것입니다. PassTIP로 여러분은 같고 싶은 인증서를 빠른시일내에 얻게될것입니다.

350-101인증덤프공부: https://www.passtip.net/350-101-pass-exam.html