We know that time is very precious to everyone, especially the test takers to study our NSE7_FSN_AR-7.6 exam questions. Saving time means increasing the likelihood of passing the NSE7_FSN_AR-7.6 exam. In order not to delay your review time, our NSE7_FSN_AR-7.6 Actual Exam can be downloaded instantly. Within about 5 - 10 minutes of your payment, you will receive our login link available for immediate use of our NSE7_FSN_AR-7.6 study materials.
| Section | Objectives |
|---|---|
| Topic 1: Enterprise Firewall | - Authentication and Access Control
|
| Topic 2: SD-WAN | - SD-WAN deployment
|
>> New NSE7_FSN_AR-7.6 Test Labs <<
After you purchase our NSE7_FSN_AR-7.6 exam guide is you can download the test bank you have bought immediately. You only need 20-30 hours to learn and prepare for the NSE7_FSN_AR-7.6 exam, because it is enough for you to grasp all content of our NSE7_FSN_AR-7.6 study materials, and the passing rate of our NSE7_FSN_AR-7.6 Exam Questions is very high and about 98%-100%. Our latest NSE7_FSN_AR-7.6 quiz torrent provides 3 versions and you can choose the most suitable one for you to learn. All in all, there are many merits of our NSE7_FSN_AR-7.6 quiz prep.
NEW QUESTION # 104
Refer to the exhibit.
Original video exhibit showing a FortiManager ZTP CSV file with device serial numbers, names, branch IDs, gateways, and metadata columns.
For your zero-touch provisioning (ZTP) deployment, you review the CSV file shown in the exhibit and note that it is missing important information.
Which two elements must you change before you can import it into FortiManager? (Choose two.)
Answer: A,D
Explanation:
" The file must contain some mandatory values, such as the device serial numbers, the device names, and the associated blueprints " Technical Explanation:
FortiManager zero-touch provisioning enables centralized deployment of FortiGate devices through device blueprints, provisioning templates, metadata variables, and model-device registration.
The exhibit shows multiple devices identified by serial numbers, including branch1_fgt, branch2_fgt, shop1_fgt, and shop2_fgt. However, the last row does not contain a device name, and the CSV file does not provide an associated device blueprint.
Option B is correct: Every device being imported must have a defined device name. FortiManager uses the name to identify and manage the corresponding model device in the device database.
Option D is correct: A device blueprint defines the provisioning information associated with a device, including templates, policies, and other configuration requirements. The guide specifically identifies the blueprint as mandatory for the documented bulk-import process.
Why the other options are incorrect:
Option A: User-defined metadata variables provide device-specific configuration values, but FortiManager does not require every optional metadata variable to have a value for every device.
Option C: IP-address metadata variables are required only when the associated configuration needs them.
There is no universal requirement that every IP-address metadata field in the CSV must be populated.
Architectural Consideration: The branch_id column also matters for SD-WAN branch deployments, unless FortiManager is configured to assign branch IDs automatically. For FortiGate VM model imports, the guide additionally specifies a VM interface-count field.
References: SD-WAN 7.6 Enterprise Administrator Study Guide, SD-Branch and Zero-Touch Provisioning, pages 59-65.
NEW QUESTION # 105
Refer to the exhibit.
The partial output of diagnose sys session stat command is shown.
Which statement about the output shown in the exhibit is correct?
Answer: C
Explanation:
The correct answer is C.
The exhibit shows:
562 in ESTABLISHED state
27 in CLOSE state
memory_tension_drop=0
ephemeral=0/131072
According to the study guide, for TCP sessions: "The protocol state in the session table is a two-digit number.
For TCP, the first number (from left to right) is related to the server-side state and is 0 when the session is not subject to any inspection (flow or proxy)... The second digit is the client-side state." The same page also shows that value 1 = ESTABLISHED So, if a TCP session is in ESTABLISHED state and there is no inspection, its proto_state is 01:
first digit 0 = no inspection
second digit 1 = ESTABLISHED
That makes C correct. This is also consistent with FortiOS examples showing established TCP sessions with proto=6 proto_state=01 Why the other options are wrong:
A is wrong because the field that indicates sessions dropped due to low free memory is memory_tension_drop, and in the exhibit it is 0, not 113. The study guide states: "If there is a lack of free memory, the kernel deletes the oldest sessions. The command shown on this slide displays the number of sessions the kernel deleted because of this mechanism."So 113 is the clash value, not memory-tension drops.
B is wrong because ephemeral=0/131072 does not mean 131072 ephemeral sessions were recorded. The study guide explains that FortiGate "sets a hard limit on the maximum number of ephemeral sessions that can exist at the same time in the session table."Therefore:
0 = current ephemeral sessions
131072 = maximum allowed ephemeral sessions for that model/context
D is wrong because the study guide says the temporary retention for possible out-of-order packets happens in state value 5 (TIME_WAIT): "When a session is closed by both the sender and receiver, FortiGate keeps that session in the session table for a few seconds, to allow for any out-of-order packets that might arrive after the FIN/ACK packet. This is the state value 5."But the exhibit shows 27 in CLOSE state, and the same table shows CLOSE = 6, not TIME_WAIT So the verified answer is C.
NEW QUESTION # 106
You want to harden the SSL/SSH inspection profile for access to HTTPS web servers.
Which two configuration changes allow you to remove vulnerabilities? (Choose two answers.)
Answer: A,D
Explanation:
Setting unsupported-ssl-version to block prevents HTTPS connections from continuing when the negotiated SSL/TLS version falls below the version permitted by the inspection profile. The Enterprise Firewall 7.6 Administrator Study Guide demonstrates this hardening control together with an appropriate minimum version and explains that it can block obsolete TLS versions while accepting newer, secure versions.
Therefore, option A is correct.
Enabling Server certificate SNI check protects against hostname inconsistencies between the client-supplied SNI and the server certificate. The FortiOS guide explains that, when enabled, FortiGate uses the certificate's CN when the SNI hostname does not match any CN or SAN entry. This reduces the risk of SNI-based filtering evasion or domain-fronting behavior, making option B correct.
Setting untrusted certificates to Ignore weakens security. FortiGate proceeds with the SSL session regardless of whether the server certificate is trusted. Option C is therefore incorrect.
SSL 3.0 is obsolete and vulnerable, including exposure to POODLE-style attacks. Setting it as the minimum permitted version does not constitute secure hardening. A hardened profile should normally require TLS 1.2 or later, so option D is incorrect.
NEW QUESTION # 107
Refer to the exhibit, which shows a partial output from the get router info routing-table database command.
The administrator wants to configure a default static route for port3 and assign a distance of 50 and a priority of 0.
What will happen to the port1 and port2 default static routes after the port3 default static route is created?
Answer: B
NEW QUESTION # 108
Refer to the exhibit, which shows a partial output of a real-time LDAP debug.
What two conclusions can you draw from the output? (Choose two.)
Answer: A,C
Explanation:
The exhibit includes these key debug lines:
* start_search_dn-base: ' DC=TAC,DC=ottawa,DC=fortinet,DC=com ' filter:sAMAccountName=jsmith
* get_all_dn-Found DN 1:CN=John Smith,CN=Users,DC=TAC,DC=ottawa,DC=fortinet,DC=com The study guide explains that in regular bind , LDAP authentication has four steps , and that during step 2 , FortiGate searches the LDAP tree to find the user's DN:
"During the second step, FortiGate does a search query in the LDAP database to find the user's location-in other words, the user's DN. If the user is found, the server replies with the user's DN." It also states for the real-time debug of step 2:
"An fnbamd_ldap_build_dn_search_req-base message indicates that FortiGate is performing step two:
searching for the user in the LDAP tree. This message includes the base branch (distinguished name setting) and the name of the attribute used to locate the user... If the LDAP server finds the user, the output shows the user's full DN." That directly proves:
* D is correct because the debug is showing step 2: Search Request
* A is correct because the base DN and found DN are under DC=TAC,DC=ottawa,DC=fortinet, DC=com, which corresponds to the LDAP domain/tree root TAC.ottawa.fortinet.com Why the other options are wrong:
* B is wrong because binding with the user's credentials is step 3 , not the step shown here. The study guide says: "Step 3 - Bind user credentials" and shows that this happens later with fnbamd_ldap_build_userbind_req / __ldap_build_bind_req-Binding to ' CN=John Smith... '
* C is wrong because collecting user group information is step 4 , not the step shown in the exhibit.
The study guide says: "The last step is to get the user group information" and shows step 4 with Attr query / memberOf search
NEW QUESTION # 109
......
Our Test4Sure has devoted more time and efforts to develop the NSE7_FSN_AR-7.6 exam software for you to help you successfully obtain NSE7_FSN_AR-7.6 exam certification with less time and efforts. Our promise of "no help, full refund" is not empty talk. No matter how confident we are in our dumps, once our dumps do not satisfy you or have no help for you, we will immediately full refund all your money you purchased our NSE7_FSN_AR-7.6 Exam software. However, we believe that our NSE7_FSN_AR-7.6 exam software will meet your expectation, and wish you success!
Accurate NSE7_FSN_AR-7.6 Prep Material: https://www.test4sure.com/NSE7_FSN_AR-7.6-pass4sure-vce.html