ITDumpsKR의 Fortinet인증NSE6_EDR_AD-7.0시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Fortinet인증NSE6_EDR_AD-7.0시험덤프자료를 제공받을수 있습니다.
| Section | Weight | Objectives |
|---|---|---|
| Monitoring and Troubleshooting | 10% | - Performance and issue diagnosis - Log and alert troubleshooting - System monitoring and health checks |
| FortiEDR System Architecture and Deployment | 25% | - Multi-tenancy deployment - Installation and deployment process - Architecture and technical positioning - API-based management operations - Inventory management and system tools |
| Integration and Security Fabric | 15% | - FortiXDR deployment and configuration - Fortinet Security Fabric integration |
| Security Settings and Policies | 25% | - Playbooks creation and management - Fortinet Cloud Service (FCS) integration - Security policies configuration - Communication control policies |
| Events, Forensics, and Threat Hunting | 25% | - Forensic analysis and incident investigation - Security event and alert analysis - Threat hunting profiles and queries - Threat hunting data interpretation |
>> NSE6_EDR_AD-7.0높은 통과율 덤프공부자료 <<
Fortinet인증 NSE6_EDR_AD-7.0시험은 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은ITDumpsKR가 도와드립니다. ITDumpsKR의 Fortinet인증 NSE6_EDR_AD-7.0덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다.덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여Fortinet인증 NSE6_EDR_AD-7.0시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 가깝도록 도와드립니다.
질문 # 22
You are asked to configure a query to run every 15 minutes, automatically searching for specific registry modifications across all endpoints. Which FortiEDR feature must you configure? (Choose one answer)
정답：C
설명：
The correct answer is C.
The FortiEDR guide explains that Threat Hunting searches across endpoint activity events, including registry activity. It states that Threat Hunting can search based on attributes of files, registry keys and values, network, processes, event log, and activity event types. This fits the requirement to search for specific registry modifications across endpoints.
The guide also explains that after filtering activity events, the query can be saved and defined as a Scheduled Query. It says: "Scheduled Query: Mark this option to automate the process of detecting threats so that this query is run automatically according to the schedule that you define." It also states that a security event is automatically created in the Incidents tab when matches are detected, and notifications can be sent through email, Syslog, and other configured methods.
The guide further states that the Repeat Every/On options define the frequency and schedule when the query runs. Therefore, a 15-minute recurring query is handled through the Scheduled Query capability in Threat Hunting, not Communication Control, policy override, or a manual Playbook trigger.
Strictly speaking, the guide calls this a scheduled query under Threat Hunting saved queries, not a
"communication control rule" or "manual query." Option C is the intended answer.
=========
질문 # 23
You are asked to create a playbook to isolate a device with a collector. Which action category does isolating a device with a collector fall under? (Choose one answer)
정답：C
설명：
The correct answer is A. Investigation .
The FortiEDR 7.0.0 Administration Guide states that Investigation actions enable administrators to isolate a device or assign it to a high-security Collector Group for further investigation of the device's activity. Under the Investigation section, the guide lists the available investigation action types, including "Isolate device with Collector," "Isolate device with NAC," and "Move device to High Security Group." For Isolate device with Collector , the guide explains that the action blocks communication to and from the affected Collector, and it applies only to endpoint Collectors. If the Playbook policy is configured to isolate a device for a malicious event, then when a malicious security event is triggered, the device is isolated from communicating with the outside world for both sending and receiving.
So, this is not a Remediation , Custom , or Notification action. In FortiEDR Playbook policy terminology, Isolate device with Collector belongs under Investigation .
=========
질문 # 24
What specific action does FortiEDR take when the Zero Trust Device Tagging playbook is activated?
(Choose one answer)
정답：D
설명：
The correct answer is C.
The FortiEDR 7.0.0 Administration Guide explains that Identity Management integration can use FortiClient EMS. The connector requires API credentials or FortiCloud credentials depending on whether FortiClient EMS is on-premises or cloud-based. The guide states that for the out-of-the-box action, such as Zero Trust device tagging on FortiClient EMS, FortiEDR tags the device as non-trusted in the identity management system and specifies the classification tag to apply in the Tag name field.
The guide also lists predefined FortiClient EMS 7.2 or later fabric tags used by FortiEDR, including FortiEDR_Malicious, FortiEDR_PUP, FortiEDR_Suspicious, FortiEDR_Likely_Safe, and FortiEDR_Probably_Good. These tags are used by FortiClient EMS to tag the endpoint based on FortiEDR classification.
Finally, the guide states that to configure the automated response, the administrator must go to Security Settings > Playbooks, open the relevant Playbook policy, and place a checkmark in the relevant classification column next to the Zero Trust device tagging row under Remediation. FortiEDR is then configured to automatically tag a device as non-trusted when a security event is triggered.
Options A, B, and D are wrong. FortiEDR does not remove unmanaged endpoints, does not apply a default tag to every endpoint, and does not disable the endpoint merely until a tag is assigned. The action is API- based FortiClient EMS tagging tied to FortiEDR event classification
질문 # 25
Refer to the exhibit.
Based on the exhibit, which two observations are true? (Choose two answers)
정답：C,D
설명：
The correct answers are C and D .
The exhibit shows the incident classification as Malicious . In the Activity Audit, the entry from FortinetCloudServices states: "Classification change: Malicious" and also says the file is classified as malicious. This directly proves that FCS classified the event as malicious . The FortiEDR guide explains that the audit history shows the chronology for classifying the security event and displays details when FortiEDR Cloud Service (FCS) reclassifies a security event after its initial classification by the Core.
The exhibit also states that the file was "Detected as Unknown malware." This supports option D in the exam wording: FortiEDR/FCS has classified the file as malicious, but it is being identified as unknown malware , meaning it was not recognized as a known malware family/signature at the time of classification.
The guide explains that FCS enhances classification using data enrichment, automated and manual analysis, file analysis, sandboxing, machine learning flow analysis, commonality analysis, crowdsourced data deduction, and other methods, so "unknown malware" can still be classified malicious by FCS.
Option A is wrong because the exhibit shows Malicious , not Suspicious. Option B is wrong because the incident status is Unhandled , not resolved or handled.
=========
질문 # 26
What specific action does FortiEDR take when the Zero Trust Device Tagging playbook is activated?
(Choose one answer)
정답：D
질문 # 27
......
Fortinet NSE6_EDR_AD-7.0 덤프의 높은 적중율에 놀란 회원분들이 계십니다. 고객님들의 도와 Fortinet NSE6_EDR_AD-7.0 시험을 쉽게 패스하는게 저희의 취지이자 최선을 다해 더욱 높은 적중율을 자랑할수 있다록 노력하고 있습니다. 뿐만 아니라 ITDumpsKR에서는한국어 온라인서비스상담, 구매후 일년무료업데이트서비스, 불합격받을수 환불혹은 덤프교환 등탄탄한 구매후 서비스를 제공해드립니다.
NSE6_EDR_AD-7.0최고덤프자료: https://www.itdumpskr.com/NSE6_EDR_AD-7.0-exam.html