DOWNLOAD the newest Braindumpsqa HPE7-A01 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1r2JKszplsJ87Ig9YNEOgIgtxOkdsz6hd
The Aruba Certified Campus Access Professional Exam (HPE7-A01) is one of the popular exams of HPE7-A01. It is designed for HP aspirants who want to earn the Aruba Certified Campus Access Professional Exam (HPE7-A01) certification and validate their skills. The HPE7-A01 test is not an easy exam to crack. It requires dedication and a lot of hard work. You need to prepare well to clear the HPE7-A01 test on the first attempt. One of the best ways to prepare successfully for the HPE7-A01 examination in a short time is using real HP HPE7-A01 Exam Dumps.
| Section | Weight | Objectives |
|---|---|---|
| Authentication and Authorization | 8% | - AAA Services
|
| WLAN | 17% | - Wireless LAN Technologies
|
| Network Stack | 4% | - Networking Fundamentals
|
| Security | 9% | - Campus Security
|
| Routing | 13% | - Routing and Network Services
|
| Managing and Monitoring | 6% | - Network Operations
|
| Network Resiliency and Device Virtualization | 8% | - Redundancy and High Availability
|
| Switching | 14% | - Layer 2 and Layer 3 Switching
|
| Troubleshooting | 6% | - Fault Isolation and Diagnostics
|
| Connectivity | 8% | - Campus Connectivity Technologies
|
| Performance Optimization | 7% | - Optimization Techniques
|
>> HPE7-A01 Reliable Test Braindumps <<
Practice what you preach is the beginning of success. Since you have chosen to participate in the demanding IT certification exam. Then you have to pay your actions, and achieve excellent results. Braindumpsqa's HP HPE7-A01 exam training materials are the best training materials for this exam. With it you will have a key to success. Braindumpsqa's HP HPE7-A01 Exam Training materials are absolutely reliable materials. You should believe that you can pass the exam easily, too.
NEW QUESTION # 73
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?
Answer: C
Explanation:
Explanation
The show arp command displays the ARP table for a specific VRF or all VRFs on the switch. The ARP table contains the IP address to MAC address mappings for hosts that are directly connected to the switch or reachable through a gateway. If the client device is connected to another switch by VSX LAG, the ARP entry for the client device will not be present on the primary switch unless it has communicated with it recently.
Therefore, to find the IP address of the client device, the administrator should run the show arp command on the secondary switch in the VSX pair, specifying the VRF name that contains the client device's subnet.
References:
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-9B8F6E8F-9C7A-4F0D-AE7B-9D8E
NEW QUESTION # 74
A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled.
The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly?
Answer: D
Explanation:
Explanation
Option C is the correct configuration to ensure that APs will work properly. It uses the ap command to configure a port profile for APs with VLAN 100 as the native VLAN and VLAN 200 and 300 as tagged VLANs. It also enables LLDP on the ports to discover the APs and assign them to the port profile automatically. The other options are incorrect because they either do not use the ap command, do not enable LLDP, or do not configure the VLANs correctly. References:
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch03.html
NEW QUESTION # 75
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device The following configuration was created on the switch:
Answer: A
Explanation:
Explanation
OSPF (Open Shortest Path First) is a routing protocol that uses link-state information to calculate the best path to each destination in the network. OSPF establishes adjacencies with neighboring routers to exchange routing information and maintain a consistent view of the network topology1.
To establish an OSPF adjacency, the routers need to have some common parameters, such as the area ID, the network type, the hello interval, the dead interval, and the authentication method2. The routers also need to have a matching subnet mask on the interface that connects them3.
In this case, the Aruba CX 6300 VSF stack has an SVI (Switched Virtual Interface) on VLAN 10 with an IP address of 10.1.1.1/24 and a LAG (Link Aggregation Group) on port 1/1/1 and port 2/1/1 that connects to a neighboring device. The SVI is configured with OSPF area 0 and network type broadcast. The LAG is configured with OSPF passive mode, which means that it will not send or receive OSPF hello packets.
The neighboring device has an interface with an IP address of 10.1.1.2/24 and a LAG on port 1/0/1 and port
2/0/1 that connects to the Aruba CX 6300 VSF stack. The interface is configured with OSPF area 0 and network type broadcast.
Since the Aruba CX 6300 VSF stack and the neighboring device have the same area ID, network type, subnet mask, and default hello and dead intervals on their interfaces, they will be able to establish an OSPF adjacency over SVI 10 with LAG 1. The OSPF passive mode on the LAG will not affect the adjacency, because it only applies to the LAG interface, not the SVI interface.
NEW QUESTION # 76
You are configuring an SVI on an Aruba CX switch that needs to have the following characteristics:
* VLANID = 25
. IPv4 address 10 105 43 1 with mask 255 255 255.0
* IPv6 address fd00:5708::f02d:4df6 with a 64 bit prefix length
* member of VRF eng
* VRF eng and VLAN 25 have not yet been created
Which command lists will satisfy the requirements with the least number of commands?
Answer: B
Explanation:
The other options either use more commands or do not create the VRF or the VLAN.
Option C uses the following commands:
* vrf eng: This command creates a VRF named eng and enters the VRF configuration mode1.
* vlan 25: This command creates a VLAN with ID 25 and enters the VLAN configuration mode2.
* interface vlan 25: This command creates an SVI on VLAN 25 and enters the interface configuration mode3.
* ip address 10.105.43.1/24 ipv6 address fd00:5780::102d:4df6/64 vrf attach eng: This command assigns an IPv4 address of 10.105.43.1 with a subnet mask of 255.255.255.0 and an IPv6 address of fd00:5780::102d:4df6 with a prefix length of 64 to the SVI, and attaches it to the VRF eng.
NEW QUESTION # 77
A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled.
The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly?
Answer: C
Explanation:
Explanation
Option C is the correct configuration to ensure that APs will work properly. It uses the ap command to configure a port profile for APs with VLAN 100 as the native VLAN and VLAN 200 and 300 as tagged VLANs. It also enables LLDP on the ports to discover the APs and assign them to the port profile automatically. The other options are incorrect because they either do not use the ap command, do not enable LLDP, or do not configure the VLANs correctly. References:
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch03.html
NEW QUESTION # 78
......
Our experts have carefully researched each part of the test syllabus of the HPE7-A01 guide materials. Then they compile new questions and answers of the study materials according to the new knowledge parts. At last, they reorganize the HPE7-A01 learning questions and issue the new version of the study materials. Once the newest test syllabus of the HPE7-A01 Exam appear on the official website, our staff will quickly analyze them and send you the updated version. So our HPE7-A01 guide materials deserve your investment.
New HPE7-A01 Dumps Free: https://www.braindumpsqa.com/HPE7-A01_braindumps.html
DOWNLOAD the newest Braindumpsqa HPE7-A01 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1r2JKszplsJ87Ig9YNEOgIgtxOkdsz6hd