In the process of preparing the passing test, our NSE6_FNC_AD-7.6 guide materials and service will give you the oriented assistance. We can save your time and energy to arrange time schedule, search relevant books and document, ask the authorized person. As our study materials are surely valid and high-efficiency, you should select us if you really want to Pass NSE6_FNC_AD-7.6 Exam one-shot. With so many advantages of our NSE6_FNC_AD-7.6 training engine to help you enhance your strength, would you like have a look at our process of using NSE6_FNC_AD-7.6 study materials?
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Concepts and Initial Configuration | 25% | - Isolation networks and configuration wizard - Model and organize infrastructure devices - FortiNAC-F architecture and concepts |
| Topic 2: Network Visibility and Monitoring | 20% | - Logging and reporting - Guest and contractor management - Device profiling and classification - Troubleshooting network and device status |
| Topic 3: Integration | 25% | - FortiNAC-F Manager configuration - MDM and third-party device integration - Syslog and SNMP trap integration - Integration with FortiGate/FortiOS |
| Topic 4: Deployment and Provisioning | 30% | - Access control and logical networks - High Availability (HA) setup and monitoring - Security policies and enforcement - Security automation configuration |
>> NSE6_FNC_AD-7.6 Exam Syllabus <<
Now you need not be worried, if you are run short of time for NSE6_FNC_AD-7.6 exam preparation or your tough work schedule doesn't allow you spare time for studying preparatory guides. Relying on TopExamCollection NSE6_FNC_AD-7.6 Dumps will award an easy course to get through the exam and obtain a credential such as NSE6_FNC_AD-7.6 you ever desired.
NEW QUESTION # 75
An administrator wants to build a security rule that will quarantine contractors who attempt to access specific websites.
In addition to a user host profile, which Iwo components must the administrator configure to create the security rule? (Choose two.)
Answer: C,E
Explanation:
In FortiNAC-F, theSecurity Incidentsengine is used to automate responses to security threats reported by external devices. When an administrator wants to enforce a policy, such as quarantining contractors who access restricted websites, they must create aSecurity Rule. A Security Rule acts as the " if-then " logic that correlates incoming security data with the internal host database.
The documentation specifies that a Security Rule consists of three primary configurable components:
User/Host Profile:This identifieswhoorwhatthe rule applies to (in this case, " Contractors " ).
Trigger:This is theeventthat initiates the rule evaluation. In this scenario, the Trigger would be configured to match specific syslog messages or NetFlow data indicating access to prohibited websites. Triggers use filters to match vendor-specific data, such as a " Web Filter " event from a FortiGate.
Action:This defineswhathappens when the Trigger and User/Host Profile are matched. For this scenario, the administrator would select a " Quarantine " action, which instructs FortiNAC-F to move the endpoint to a restricted VLAN or apply a restrictive ACL.
While " Methods " (A) relate to authentication and " Security Strings " (E) are used for specific SNMP or CLI matching, they are not the structural components of a Security Rule in the Security Incidents menu.
" Security Rules are used to perform a specific action based on certain criteria... To configure a Security Rule, navigate toLogs > Security Incidents > Rules. Each rule requires aTriggerto define the event criteria, anActionto define the automated response (such as Quarantine), and aUser/Host Profileto limit the rule to specific groups. " -FortiNAC-F Administration Guide: Security Rules and Incident Management.
NEW QUESTION # 76
Refer to the exhibit.
A FortiNAC-F N+1 HA configuration is shown.
What will occur if CA-2 fails?
Answer: B
Explanation:
In anN+1 High Availability (HA)configuration, a single secondary Control and Application (CA) server provides backup for multiple primary CA servers. The FortiNAC-F Manager (FortiNAC-M) acts as the centralized orchestrator for this cluster, monitoring the health of all participating nodes.
According to theFortiNAC-F 7.6.0 N+1 Failover Reference Manual, when a primary CA (such asCA-2in the exhibit) fails, the secondary CA (CA-3) is automatically promoted by the Manager to take over the specific workload and database functions of that failed primary. Crucially, the documentation specifies that even after this promotion, the system architecture maintains its N+1 logic. The secondary CA effectively " assumes the identity " of the failed primary while continuing to operate within the N+1 framework established by the Manager.
It doesnotmerge with CA-1 to form a traditional 1+1 active/passive cluster (A), nor does it engage in load balancing (D), as FortiNAC-F HA is designed for redundancy and failover rather than active traffic distribution. Furthermore, CA-3 does not " share " management with CA-1 (C); it independently handles the tasks originally assigned to CA-2. Throughout this failover state, the Manager continues to oversee the group, and CA-3 remains the designated secondary unit currently acting in a primary capacity for the downed node until CA-2 is restored.
" In an N+1 Failover Group, theSecondary CAis designed to take over the functionality ofany single failed primary componentwithin the group. The FortiNAC Manager monitors the primaries and initiates the failover to the secondary... Once failover occurs, the secondary continues to operate as the backup unit for the failed primary while remaining part of the managed N+1 HA configuration. " -FortiNAC-F 7.6.0 N+1 Failover Reference Manual: Failover Behavior Section.
NEW QUESTION # 77
An administrator wants to use FortiNAC-F to prevent internal engineers from accessing specific websites as defined in web filter categories on FortiGate. In addition to a security trigger and associated action, which configuration must also be defined on FortiNAC-F?
Answer: B
Explanation:
The correct answer is C . FortiNAC-F security automation does not rely only on a trigger and action. After a security alert is received and the security trigger is satisfied, FortiNAC-F can also evaluate an associated user
/host profile before generating the security alarm and executing the action. The study guide explains that user
/host profiles are the same profiles used by security policies and are used in security rules to leverage "who, what, where, and when" visibility information. This is exactly what the question requires: the rule must apply specifically to internal engineers , not every user who triggers the FortiGate web-filter category event.
A compliance policy is wrong because compliance policies evaluate endpoint health, posture, scans, or agent results; they do not scope FortiGate web-filter-triggered automation to a user population. A firewall policy is configured on FortiGate, not as the FortiNAC-F-side matching condition in the security rule. A profiling method is also wrong because profiling methods classify rogue or unknown devices, such as printers, cameras, or phones; they do not identify internal engineers for a security automation workflow. The user/host profile is the correct FortiNAC-F object because it lets the same FortiGate security trigger produce a different response depending on the matched user, host, group, location, or ownership context.
NEW QUESTION # 78
Two FortiNAC-F devices have been configured as a 1+1 HA pair. The primary server went offline and a successful failover to the secondary has occurred.
What happens if the primary server comes back online?
Answer: D
Explanation:
In a 1+1 HA configuration, once failover has occurred and the secondary assumes control, it remains the active controller when the original primary comes back online. The restored primary rejoins as the standby unit, and control is not automatically reverted.
NEW QUESTION # 79
When preparing network infrastructure devices for visibility, what are the two main advantages of using MAC notification traps on supported devices instead of link-up and link-down traps? (Choose two.)
Answer: B,C
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of FortiNAC-F 7.6 Administrator Guide or Knowledge:
Exact Extract:
The FortiNAC-F study guide states that MAC notification traps are preferred because FortiNAC-F does not need to connect back to the infrastructure device every time a link-up or link-down trap is received. The required MAC and port information is already included in the MAC notification trap, which makes database updates faster and uses fewer resources. It also states that hosts and devices connected through hubs or IP phones are seen immediately, even when the downstream device cannot generate link-up or link-down traps.
Technical Deep Dive:
The correct answers are B and C . With link-up/link-down traps, the trap only tells FortiNAC-F that an interface changed state. FortiNAC-F then has to perform an L2 poll against the switch forwarding table to discover which MAC address appeared or disappeared. That means extra SNMP/CLI activity, more delay, and more processing on both FortiNAC-F and the switch. The guide confirms that link traps trigger FortiNAC- F to perform a Layer 2 poll, while MAC notification traps directly contain the learned or removed MAC address and associated port.
Option A is wrong because MAC notification traps are Layer 2 visibility events. They identify MAC address and port , not IP address. IP-to-MAC correlation comes from Layer 3 polling or DHCP fingerprinting, not MAC notification traps. Option D is badly worded and should not be selected: MAC notification traps do provide faster updates, but the processing overhead is reduced, not slightly increased.
Operationally, on supported switches you enable SNMP traps for MAC address-table changes and point the trap destination to FortiNAC-F. On Cisco-style infrastructure, this is usually done with commands such as snmp-server host < FortiNAC-IP > version 2c < community > plus MAC notification trap configuration. Do not enable MAC notification traps on uplinks, because uplinks learn many downstream MAC addresses and would create misleading endpoint-location data.
NEW QUESTION # 80
......
This Fortinet braindump study package contains NSE6_FNC_AD-7.6 latest questions and answers from the real NSE6_FNC_AD-7.6 exam. These questions and answers are verified by a team of professionals and the content of this NSE6_FNC_AD-7.6 braindump is taken from the real exam. Since we are 100% sure of the content we provide a Money Back Guarantee offer! We belive taht NSE6_FNC_AD-7.6 Braindumps can help you pass your NSE6_FNC_AD-7.6 exam with minimal effort.
New NSE6_FNC_AD-7.6 Test Preparation: https://www.topexamcollection.com/NSE6_FNC_AD-7.6-vce-collection.html