BONUS!!! Download part of ActualCollection NSE5_FNC_AD_7.6 dumps for free: https://drive.google.com/open?id=1JD3x4nLYYS7yoXePiV4Loy4Tp4VfrF6X
Our third format is the desktop practice NSE5_FNC_AD_7.6 exam software which can be used easily after installing it on your Windows laptop and computers. These formats are there so that applicants with different study styles can use them to attempt the Fortinet NSE 5 - FortiNAC-F 7.6 Administrator (NSE5_FNC_AD_7.6) PRACTICE QUESTIONS successfully. The practice material of ActualCollection can be instantly accessed just after purchasing it.
| Section | Objectives |
|---|---|
| Topic 1: Network Visibility and Monitoring | - Guest and contractor access management
|
| Topic 2: Integration | - Connecting FortiNAC-F with other systems
|
| Topic 3: Deployment and Provisioning | - Security automation for automatic event responses
|
| Topic 4: Concepts and Initial Configuration | - Organizing infrastructure devices within FortiNAC-F
|
>> Valid Braindumps Fortinet NSE5_FNC_AD_7.6 Ppt <<
Questions of Fortinet NSE 5 - FortiNAC-F 7.6 Administrator desktop practice exam software are similar to the actual NSE5_FNC_AD_7.6 exam questions. This gives you a genuine feeling of being in an NSE5_FNC_AD_7.6 exam atmosphere. This feature helps you become familiar with the NSE5_FNC_AD_7.6 real test format and improves your ability to do well on the actual NSE5_FNC_AD_7.6 exam.
NEW QUESTION # 55
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon. What would cause this?
Answer: B
Explanation:
In FortiNAC-F, theInventory topologyuses specific icons to represent the status and model of discovered network infrastructure. When a switch or other network device is discovered via SNMP, FortiNAC-F retrieves itsSystem ObjectID (sysObjectID)to identify the specific make and model. This OID is then compared against the internal database of supported device mappings.
Aquestion mark (?)icon appearing on a discovered switch indicates that while the discovery process successfully communicated with the device (meaning SNMP credentials were correct), theSNMP ObjectID is not recognizedor mapped in the current version of FortiNAC-F. This essentially means the device is " unsupported " by the current software out-of-the-box. Because the OID is unknown, FortiNAC-F does not know which CLI or SNMP command set to use for critical functions like L2 polling (host visibility) or VLAN switching (enforcement). To resolve this, an administrator can manually " Set Device Mapping " to a similar existing model or a " Generic SNMP Device " if only basic L3 visibility is required.
" Discovered devices displaying a ' ? ' iconindicate the currently running version does not have a mapping for that device ' sSystem OID(device is not supported). Device mappings are used to manage the device by performing functions such as L2/L3 Polling, Reading, and Switching VLANs. " -Fortinet Technical Tip:
Options for devices unable to be modeled in Inventory.
NEW QUESTION # 56
Which two statements are true about integrating a third-party device using SNMP traps from that device as input to generate an event? (Choose two.)
Answer: A,D
Explanation:
The correct answers are A and C . Fortinet's FortiNAC-F 7.6 documentation states that, to receive and interpret traps from devices or applications, those devices or applications must be modeled in FortiNAC and must have an associated IP address. That validates option A directly. The same Fortinet Trap MIB Files documentation also lists a FortiNAC-OS requirement: the snmp option must be included in the set allowaccess command. That validates option C .
Option B is wrong because Trap MIB integration is not limited to SNMPv3. Fortinet states that Trap MIB supports receiving SNMPv1 and SNMPv2 traps from external devices, while SNMPv3 is discussed separately for traps that populate host and user records.
Option D is the trap. The Fortinet documentation explicitly says IP address OID, MAC address OID, and user ID OID are not all required ; any one OID can be used to identify the host or user that triggered the trap. So the statement that both the IP address OID and MAC address OID must be configured is false.
NEW QUESTION # 57 
An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn ' t working.
What is the problem with the configuration?
Answer: D
Explanation:
In a FortiNAC-F deployment, the configuration of theDHCP scopefor isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between theDHCP configurationand theNetwork Topology.
As shown in the " Network Topology " exhibit, theRegistration Networkresides on a router interface (or sub- interface) with the IP address192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the " DHCP configuration " exhibit shows the scope " REG-ScopeOne
" configured with aGateway of 10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading theCaptive Portalor communicating with the FortiNAC server.
According to theFortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the " Gateway " field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router ' s DHCP Relay (IP Helper) and DNS redirection.
" When configuring scopes for a Layer 3 network, theGatewayvalue must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic. If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN. " -FortiNAC-F Configuration Wizard Reference Manual: DHCP Scopes.
NEW QUESTION # 58
Refer to the exhibit.
After a successful layer 2 poll, two hosts were learned on the same port The port is a member of the Role- Based Access and Forced Registration groups. The switch has been configured to leverage a single isolation VLAN.
How will FortiNAC-F manage this port?
Answer: D
Explanation:
The correct answer is A . The exhibit shows two adapters learned on the same wired port: one appears as a rogue/unknown host, and the other is associated with the Lab Hosts rule. The port is in both Role-Based Access and Forced Registration . FortiNAC-F state-based control takes precedence over policy-based provisioning, and the study guide states that when a rogue host connects to a port in the Forced Registration group, FortiNAC-F isolates that host by moving it into the registration captive network. The guide also explains that the Isolation network can be used as a single network for abnormal host states while still presenting state-specific portal pages.
Because this is a wired switch port using VLAN-based control, FortiNAC-F cannot put one host on the production VLAN and the other host on the isolation portal VLAN at the same time on the same access port.
The VLAN change applies to the port, not independently to each MAC address behind that port. Therefore, the presence of the rogue host on a Forced Registration port causes the port to be provisioned to the isolation network. Option B is technically unrealistic for this access-port scenario. Option C is wrong because two MAC addresses alone do not make the port an uplink; FortiNAC-F uses uplink logic for infrastructure-device MACs, manually marked uplinks, or a threshold such as more than 20 MAC addresses. Option D is unrelated because Access Point Management is not triggered by learning two wired hosts on a port.
NEW QUESTION # 59
During the testing of a newly modeled infrastructure switch, the administrator is not seeing hosts as they connect or move from one port to another. What would cause this issue?
Answer: D
Explanation:
The correct answer is A . When FortiNAC-F needs near real-time Layer 2 visibility, it relies on link traps, MAC notification traps, RADIUS, or scheduled/manual Layer 2 polling. The study guide explains that MAC notification traps contain the MAC address learned or removed from the switch MAC address table and the associated port, allowing FortiNAC-F to update its database when hosts connect, disconnect, or move. It also states that MAC notification traps are the preferred method for learning and updating Layer 2 information.
If a newly modeled switch does not show hosts as they connect or move between ports, the likely problem is that MAC notification traps are not correctly configured or not reaching FortiNAC-F . Layer 3 polling failure would affect IP-to-MAC correlation, not the ability to learn which switch port a MAC address is connected to. Disabled scheduled polling could delay updates, but it would not be the best explanation when the expected behavior is immediate host detection during connection or movement testing. Contact polling only checks whether the device is reachable; it does not collect host MAC-to-port visibility.
NEW QUESTION # 60
......
It is known to us that the 21st century is an information era of rapid development. Now the people who have the opportunity to gain the newest information, who can top win profit maximization. In a similar way, people who want to pass NSE5_FNC_AD_7.6 exam also need to have a good command of the newest information about the coming exam. However, it is not easy for a lot of people to learn more about the information about the study materials. Luckily, the NSE5_FNC_AD_7.6 Study Materials from our company will help all people to have a good command of the newest information.
NSE5_FNC_AD_7.6 Certification Test Answers: https://www.actualcollection.com/NSE5_FNC_AD_7.6-exam-questions.html
P.S. Free & New NSE5_FNC_AD_7.6 dumps are available on Google Drive shared by ActualCollection: https://drive.google.com/open?id=1JD3x4nLYYS7yoXePiV4Loy4Tp4VfrF6X