NSEI_OTS_AR-7.6 exam dumps are so comprehensive that you do not need any other study material. The NSEI_OTS_AR-7.6 study material is all-inclusive and contains straightaway questions and answers comprising all the important topics in the actual NSEI_OTS_AR-7.6 demo vce. NSEI_OTS_AR-7.6 latest download demo is available for all of you. You can know the exam format and part questions of our Complete NSEI_OTS_AR-7.6 Exam Dumps. Besides, we can ensure 100% passing and offer the Money back guarantee when you choose our NSEI_OTS_AR-7.6 pdf dumps.
| Section | Objectives |
|---|---|
| Asset Management | - Use Fortinet Security Fabric for an OT network - Explain OT standards and Fortinet compliance - Implement device detection on FortiGate and FortiNAC |
| Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers - Perform risk assessment and management |
| Network Access Control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
| Network Security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
>> Exam NSEI_OTS_AR-7.6 Testking <<
This Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) certification is a valuable credential that is designed to validate your expertise all over the world. After successfully competition of NSEI_OTS_AR-7.6 exam you can gain several personal and professional benefits. All these Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) certification exam benefits will not only prove your skills but also assist you to put your career on the right track and achieve your career objectives in a short time period.
NEW QUESTION # 43
According to the IEC 62443 standard, your security level is 4 . What is your OT environment defending against? (Choose one answer)
Answer: C
Explanation:
Explanation:
NEW QUESTION # 44
Refer to the exhibit.
Why is the OT View tab not available in the Asset Identity Center section of the FortiGate-1 device? (Choose one answer)
Answer: A
Explanation:
The correct answer is A . The study guide states that "The OT view is not available by default. You must enable it in the Feature Visibility section of the GUI or using the CLI command shown on this slide" and shows config system settings # set gui-ot enable . It also says that "After you enable the feature, the Asset Identity Center contains an Asset Identity List tab and an OT View tab." This directly explains why the OT View tab is missing: the feature that enables the Purdue-style OT display has not been enabled yet.
The OT View is the view that displays devices in a Purdue diagram , and the Asset Identity List also shows the current Purdue level for each device. Because the answer options do not explicitly say enable OT View in Feature Visibility , option A is the intended match, since it refers to enabling the Purdue-related OT display feature. Option B is incorrect because device detection affects visibility of devices, not whether the OT View tab exists. Option C is not supported by the study guide, and option D is also not given as the requirement for showing the OT View tab.
NEW QUESTION # 45
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: B,D
Explanation:
According to the OT Security 7.6 Architect study guide section on Asset Management , specifically regarding FortiNAC Visibility :
* Layer 2 Polling Data : Because each physical address is unique, FortiNAC identifies hosts as they connect to the network. The information gathered during this process fills in the physical address and location information in the database.
* Visibility Components : The guide states that the physical address learned , the time it was learned , and where it was learned from provide the foundation of endpoint visibility in the form of " what, where, and when " information. This confirms that Where it was learned (Option A) and The time it was learned (Option D) are correct.
* Exclusions :
* Layer 3 Polling : The MAC-to-IP correlation (Option B) is explicitly defined as a function of Layer 3 polling , where the correlated IP address is added to the database record for the corresponding MAC address.
* DHCP Fingerprinting : The host name or system name (Option C) and the operating system are gathered via DHCP fingerprinting , not layer 2 polling.
NEW QUESTION # 46
Refer to the exhibit.
A FortiAnalyzer report is shown.
You must extract relevant information provided by the report regarding your OT network.
Which two statements are correct? (Choose two.)
Answer: C,D
Explanation:
The correct answers are B and C . The exhibit ' s Top Threat section identifies the IPS threats as Blocked , directly confirming that the attacks were prevented rather than merely detected. The OT Traffic table also shows destination port 502 . Modbus/TCP conventionally operates on TCP port 502, and the OT Security 7.6 study guide identifies Modbus as an industrial protocol supported and inspected by Fortinet OT security controls. The report does not cover only one day; its displayed timeline spans multiple dates, from approximately October 30 through November 3. Option D is also inconsistent with the report because the visible OT destination addresses are associated with the 192.168.x.x networks rather than 10.1.5.1.
FortiAnalyzer reports summarize logged information into charts and tables specifically to expose traffic patterns, threats, and OT activity such as this.
NEW QUESTION # 47
Refer to the exhibit.
The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. You must enable Virtual Patching in the Feature Visibility section .
The study guide states clearly that "By default, virtual patching profiles are hidden on the GUI, and you must enable them through System > Feature Visibility." That exactly matches the situation in the exhibit, where Virtual Patching does not appear under Security Profiles . So the issue is not that the feature is unsupported, but that it is simply hidden in the GUI until it is enabled.
The other options do not answer the question being asked. A valid OT security service license is required for virtual patching signatures and protection workflow, and OT signatures are relevant to IPS-based OT protection, but those do not explain why the menu item itself is missing from the Security Profiles section .
The guide specifically identifies Feature Visibility as the reason the Virtual Patching profile is not shown in the GUI. Therefore, the required action is to enable Virtual Patching in System > Feature Visibility .
NEW QUESTION # 48
......
When you choose ITExamSimulator's Dumps for your Fortinet NSEI_OTS_AR-7.6 exam preparation, you get the guarantee to pass NSEI_OTS_AR-7.6 exam in your first attempt. We have the best NSEI_OTS_AR-7.6 exam braindumps for guaranteed results. You can never fail NSEI_OTS_AR-7.6 exam if you use our products. We guarantee your success in NSEI_OTS_AR-7.6 exam or get a full refund. You can also get special discount on NSEI_OTS_AR-7.6 Braindumps when bought together. Purchase NSEI_OTS_AR-7.6 braindumps preparation bundle for intense training and highest score. Take NSEI_OTS_AR-7.6 PDF files with you on mobile devices and install NSEI_OTS_AR-7.6 exam practice software on your computer.
NSEI_OTS_AR-7.6 Guide: https://www.itexamsimulator.com/NSEI_OTS_AR-7.6-brain-dumps.html