P.S. MogiExamがGoogle Driveで共有している無料かつ新しいH35-580_V2.0ダンプ：https://drive.google.com/open?id=1rERTdLyF0RIL2dniBypx3LNB4bn62ijR
H35-580_V2.0テストガイドの言語は理解しやすいため、学習障害のない学習者は、学生であろうと現職のスタッフであろうと、初心者であれ、多くの経験豊富な経験豊富なスタッフであれ、年。困難なテストを通過するためにH35-580_V2.0ガイドトレントを選択するのは素晴らしい素晴らしいアイデアです。全体として、信じられないことは何もありません。今から意味のある何かをするために、成功はheする人を待って、購入して行きません！
| Section | Weight | Objectives |
|---|---|---|
| 5G Radio Network Basics | 20% | - 5G Physical Layer - 5G Network Architecture and Interface - 5G Overview - Overview of 5G Basic Signaling Process |
| 5G Network Testing and Optimization | 30% | - Analysis of 5G Radio Network Coverage Problems - Radio Network Performance Management Basics - 5G Network Test and Problem Analysis |
| 5G Radio Network Basic Feature | 20% | - 5G MIMO Feature - Uplink Fallback to LTE - 5G NR Scheduling Feature - 5G NR Mobility Management Feature - 5G NR Power Control Feature - NSA Networking Based on EPC Feature |
| 5G Network Planning Basics | 20% | - 5G Site Solution Overview - 5G Wireless Network Coverage and Capacity Estimation - 5G Site Survey and Planning |
| 5G Base Station Basic Operation | 10% | - 5G Base Station Basic Operation - Huawei 5G Base Station Product Overview |
H35-580_V2.0試験問題のさまざまなバージョンを知りたい場合があります。まず、PDFバージョンは読みやすく、印刷しやすいです。次に、ソフトウェアバージョンは実際のH35-580_V2.0実際のテストガイドをシミュレートしますが、Windowsオペレーティングシステムでのみ実行できます。第三に、オンライン版はあらゆる電子機器をサポートし、オフライン使用もサポートします。初めて、オンライン環境でH35-580_V2.0試験問題を開く必要があり、それをオフラインで使用できます。全体として、受験者が試験に合格するのを支援することが常に求められています。 H35-580_V2.0実際のテストガイドが最適です。
質問 # 55
Which of the following statistics are provided by the Probe's BLER statistics menu?(Select All that Apply)
正解：A、B、D
解説：
Explanation
According to the Probe User Guide (V100R019C10_01) (PDF)-EN, the Probe's BLER statistics menu provides the following statistics:
DIBLER: Downlink Initial Block Error Rate, which is the ratio of the number of erroneous downlink transport blocks to the total number of downlink transport blocks received by the UE in the first transmission.
DRBLER: Downlink Residual Block Error Rate, which is the ratio of the number of erroneous downlink transport blocks to the total number of downlink transport blocks received by the UE after all retransmissions.
Retransmission ratio: The ratio of the number of retransmitted downlink transport blocks to the total number of downlink transport blocks received by the UE.
The Probe's BLER statistics menu does not provide the modulation scheme as a statistic. The modulation scheme is a parameter that determines the modulation and coding scheme (MCS) used for data transmission on the physical downlink shared channel (PDSCH). The modulation scheme can be QPSK, 16QAM, 64QAM, or
256QAM. The modulation scheme can be displayed on the Probe's PDSCH configuration menu or PDSCH demodulation menu.
Therefore, the correct answer is A, B, and D.
質問 # 56
In cases where the same devices are used, which of the following link budget parameters may differ depending on use in either densely populated urban areas or rural areas?(Select All that Apply)
正解：B、C、D
解説：
Explanation
The link budget parameters that may differ depending on use in either densely populated urban areas or rural areas are area coverage rate, shadow fading margin, and penetration loss. The area coverage rate is the percentage of area within a cell that can receive a signal above a certain threshold. In densely populated urban areas, the area coverage rate may be lower than in rural areas due to more interference and obstacles 13. The shadow fading margin is an additional margin added to the link budget to account for the variation of signal strength due to obstacles in the propagation path. In densely populated urban areas, there may be more buildings and structures that cause shadow fading than in rural areas, so a larger shadow fading margin may be needed 14. The penetration loss is the loss of signal strength when it passes through walls or windows into buildings. In densely populated urban areas, there may be more indoor users than in rural areas, so a larger penetration loss may be considered 15. The antenna gain is not a parameter that depends on use in either densely populated urban areas or rural areas. It is a parameter that depends on the antenna design and configuration, which are usually fixed for a given system 16.
質問 # 57
Which of the following is not covered by a site survey?
正解：C
解説：
A site survey is an inspection of an area where work is proposed, to gather information for a design or an estimate to complete the initial tasks required for an outdoor activity. A site survey can cover various aspects, such as antenna installation space, equipment room space and load bearing capacity, site location, and other environmental factors. However, a site survey does not cover the models of hardware boards on base stations, as this information is not related to the physical characteristics of the site. The models of hardware boards on base stations are determined by the network design and configuration, which are based on the network requirements and specifications.
質問 # 58
In SA networking, which of the following is the first step for a UE to perform a cell search?
正解：C
解説：
Explanation
According to the 5G SA Cell Search & Network Entry Matrix, the first step for a UE to perform a cell search in SA networking is to synchronize frames and obtain PCI group number. This step involves the following sub-steps:
The UE scans the available frequency range to detect the presence of Synchronization Signal Blocks (SSBs) from different base stations. SSBs are periodic signals that contain essential synchronization and system information for cell search and initial access.
The UE selects an SSB with the strongest signal strength and decodes its Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). The PSS and SSS are part of the SSB and provide coarse timing synchronization and cell identity information.
The UE uses the PSS and SSS information to synchronize its internal clock with that of the base station and obtain the Physical Cell Identity (PCI) group number. The PCI group number is a 9-bit value that identifies a group of 8 cells that share the same PSS and SSS sequences. The PCI group number ranges from 0 to 1007.
The other steps for a UE to perform a cell search in SA networking are:
Synchronize half-frames and obtain the ID within a PCI group: The UE further synchronizes its timing with the base station by decoding its Narrowband Synchronization Signal (NSSS), which is also part of the SSB. The NSSS provides more precise timing information and the ID within a PCI group, which is a
3-bit value that identifies a specific cell within a PCI group. The ID within a PCI group ranges from 0 to
7. By combining the PCI group number and the ID within a PCI group, the UE can obtain the full PCI, which is a 10-bit value that uniquely identifies a cell.
Obtain other cell information: The UE decodes other signals and channels in the SSB to acquire other cell information, such as system bandwidth, subcarrier spacing, frame structure, etc. These signals and channels include Demodulation Reference Signals (DMRS), Master Information Block (MIB), System Information Block (SIB), etc.
Obtain the cell signal quality: The UE measures the cell signal quality based on various indicators, such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), Signal-to-Interference-plus-Noise Ratio (SINR), etc. These indicators reflect the strength, quality, and interference level of the received signal.
質問 # 59
In the MR-DC architecture, which of the following factors affect the data split on a base station?(Select All that Apply)
正解：A、C、D
解説：
Explanation
According to the 5G-NR (EN-DC) Bearer Concept, in MR-DC (Multi-Radio Dual Connectivity) architecture, data split on a base station can be affected by the following factors:
PDCP layer buffer: The PDCP layer buffer stores user plane data before sending it to lower layers. The buffer size and occupancy can affect how data is split between LTE and NR bearers.
X2 latency: The X2 latency is the delay between LTE and NR base stations over the X2 interface. The X2 latency can affect how data is split between LTE and NR bearers by causing reordering or duplication of packets.
Air interface latency: The air interface latency is the delay between base stations and user equipment over the air interface. The air interface latency can affect how data is split between LTE and NR bearers by causing reordering or duplication of packets.
The RLC layer buffer does not affect data split on a base station because it is located below the PDCP layer where data split occurs.
質問 # 60
......
MogiExamクライアントにH35-580_V2.0学習資料の3つのバージョンを提供し、PDFバージョン、PCバージョン、APPオンラインバージョンが含まれます。 異なるバージョンは、Huawei独自の利点とメソッドの使用を後押しします。 H35-580_V2.0試験トレントの内容は同じですが、クライアントごとに異なるバージョンが適しています。 たとえば、PCバージョンのH35-580_V2.0学習教材は、Windowsシステムを搭載したコンピューターをサポートします。その利点には、実際の操作試験環境をシミュレートし、試験をシミュレートでき、期間限定試験に参加できることです。 そして、バージョンが何であれ、ユーザーは自分の喜びでH35-580_V2.0のHCIA-5G-RNP&RNO V2.0ガイド急流を学ぶことができます。 タイトルと回答は同じであり、コンピューターまたは携帯電話またはラップトップで製品を使用できます。
H35-580_V2.0受験記: https://www.mogiexam.com/H35-580_V2.0-exam.html
P.S.MogiExamがGoogle Driveで共有している無料の2026 Huawei H35-580_V2.0ダンプ：https://drive.google.com/open?id=1rERTdLyF0RIL2dniBypx3LNB4bn62ijR