P.S. Free 2026 PECB ISO-9001-Lead-Auditor dumps are available on Google Drive shared by DumpsKing: https://drive.google.com/open?id=1YqyP-dJ5q8pszC_ho25Qwnl3G1v7YxvR
You don't need to worry about wasting your precious time but failing to get the ISO-9001-Lead-Auditorcertification. With our ISO-9001-Lead-Auditor practice guide, your success is 100% guaranteed. Tens of thousands of people have used our ISO-9001-Lead-Auditor Study Materials and the pass rate of the exam is high as 98% to 100%. This means as long as you learn with our ISO-9001-Lead-Auditor learning quiz, you will pass the exam without doubt.
| Section | Objectives |
|---|---|
| Topic 1: Conducting Audit Activities | - Audit Evidence Collection
|
| Topic 2: Audit Planning and Preparation | - Audit Preparation
|
| Topic 3: Audit Reporting and Follow-up | - Audit Reporting
|
| Topic 4: Quality Management System (QMS) Fundamentals | - Quality Principles
|
| Topic 5: Audit Principles and Fundamentals | - Audit Concepts
|
>> ISO-9001-Lead-Auditor Relevant Answers <<
DumpsKing deeply believe that our latest ISO-9001-Lead-Auditor exam torrent will be very useful for you to strength your ability, pass your ISO-9001-Lead-Auditor exam and get your certification. Our ISO-9001-Lead-Auditor study materials with high quality and high pass rate in order to help you get out of your harassment. If you do not have access to internet most of the time, if you need to go somewhere is in an offline state but you want to learn for your ISO-9001-Lead-Auditor Exam. Our website will help you solve your problem with the help of our excellent ISO-9001-Lead-Auditor exam questions.
NEW QUESTION # 177
An audit team of three people is conducting a Stage 2 audit to ISO 9001 of an engineering organisation which manufactures sacrificial anodes for the oil and gas industry in marine environments. These are aluminium products designed to prevent corrosion of submerged steel structures. As one of the auditors, you find that the organisation has shipped anodes for Project DK in the Gulf of Mexico before the galvanic efficiency test results for the anodes have been fully analysed and reported as required by the customer. The Quality Manager explains that the Managing Director authorised the release of the anodes to avoid late delivery as penalties would be imposed. The customer was not informed since the tests rarely fall below the required efficiency. You raise a nonconformity against clause 8.6 of ISO 9001.
During the audit team meeting in preparation for the Closing meeting, the second auditor disagreed with the clause of ISO 9001 selected for the above nonconformity. He thinks it should be clause 9.1.1.
Choose three options for how the audit team leader should best respond to the situation:
Answer: A,C,G
Explanation:
A: the audit team leader, it is crucial to manage differing opinions constructively and ensure that the correct clause is selected for the nonconformity based on solid evidence. Here's how the situation should be handled:
E: Invite you and the second auditor to fully explain your point of view and then decide which clause to select: This promotes collaboration and transparency, allowing both auditors to present their rationale for choosing the specific clause.
F:Review the evidence with you and the second auditor, and then decide which clause of ISO 9001 would best apply: Reviewing the evidence in relation to the specific requirements of ISO 9001 is essential for determining which clause is most appropriate.
H: Try to obtain a consensus between you and the second auditor after a discussion of the different opinions:
Consensus-building is a crucial skill for an audit team leader. Achieving agreement ensures the nonconformity is addressed accurately and with full team support.
Options such as overruling immediately (D) or deferring the decision without full discussion (B) could undermine team dynamics and the audit process. Consulting the quality manager (A) or selecting an entirely different clause (G) is unnecessary, as the team should resolve the issue internally.
NEW QUESTION # 178
An internal auditor of a manufacturer of polystyrene packaging products for the electronics industry raised a nonconformity against section 10.3 of ISO 9001 in Report IA202. The nonconformity (NC 3) stated:
"The reject rate of the finished product of 9.7% needs improvement as it doesn't meet the stated objective of top management of 5%." As the third-party auditor reviewing the internal audit process, you come across the nonconformity. For corrective action, the Quality Manager conducted an investigation into the reject rates. He reported that the collection baskets for products ejecting from the moulding machines were not large enough. About 6% of products fell onto the wet and dirty factory floor. Management stated that replacing the baskets was too costly and ordered the Maintenance Manager to ensure that the floor was kept clean and dry to prevent rejects. The auditor later checked the factory floor, which was wet and dirty in places.
From the following nonconformities, select three that the auditor could raise to ISO 9001.
Answer: A,C,F
Explanation:
The auditor could raise the following nonconformities to ISO 9001 based on the scenario:
*Option A: 10.3 - The organisation did not continuously improve. Reject rates were unchanged. This option is correct because ISO 9001:2015 clause 10.3 requires the organization to improve the suitability, adequacy and effectiveness of the quality management system. The organization did not demonstrate any improvement in reducing the reject rate of the finished product, which was a stated objective of top management. The corrective action taken by the organization was not effective in addressing the root cause of the problem and preventing its recurrence.
*Option B: 7.1.4 - The factory environment is not suitably maintained to prevent dirty products. This option is correct because ISO 9001:2015 clause 7.1.4 requires the organization to determine, provide and maintain the environment necessary for the operation of its processes and to achieve conformity of products and services.
The organization did not ensure that the factory floor was clean and dry, which affected the quality of the products and increased the risk of nonconformity.
*Option C: 7.1.1 - The organization failed to provide the required resources to prevent nonconforming products. This option is correct because ISO 9001:2015 clause 7.1.1 requires the organization to determine and provide the resources needed for the establishment, implementation, maintenance and continual improvement of the quality management system. The organization did not provide adequate collection baskets for the products ejecting from the moulding machines, which resulted in products falling onto the factory floor and becoming nonconforming.
The following options are not correct:
*Option D: 9.2.2 - Report IA202 contained a poorly worded nonconformity (NC 3). This option is not correct because ISO 9001:2015 clause 9.2.2 does not specify the requirements for the wording of nonconformities in internal audit reports. The nonconformity (NC 3) stated by the internal auditor was clear and relevant to the audit criteria and audit evidence. The issue is not with the report, but with the corrective action taken by the organization.
*Option E: 8.6 - Dirty products were released to the customer. This option is not correct because ISO
9001:2015 clause 8.6 requires the organization to implement planned arrangements, at appropriate stages, to verify that the product and service requirements have been met. The scenario does not indicate that the dirty products were released to the customer, but that they were recalled and repaired then returned to the customers. The issue is not with the release, but with the production process and the environment.
*Option F: 7.3 - Staff were not aware that products were falling onto the factory floor. This option is not correct because ISO 9001:2015 clause 7.3 requires the organization to ensure that the persons doing work under its control are aware of the quality policy, relevant quality objectives, their contribution to the effectiveness of the quality management system, and the implications of not conforming with the quality management system requirements. The scenario does not indicate that the staff were not aware of these aspects, but that the management did not provide adequate resources and environment for the staff to perform their work. The issue is not with the awareness, but with the management responsibility and resource provision.
*Option G: 10.2.1 - Conduct of an investigation was not sufficient to understand the cause of the nonconformity. This option is not correct because ISO 9001:2015 clause 10.2.1 requires the organization to react to the nonconformity and, as applicable, take action to control and correct it and deal with the consequences. The scenario indicates that the Quality Manager conducted an investigation into the reject rates and identified the cause of the nonconformity. The issue is not with the investigation, but with the corrective action taken by the management.
*Option H: 8.5.1 - Production operations were not properly controlled to avoid reject products. This option is not correct because ISO 9001:2015 clause 8.5.1 requires the organization to implement production and service provision under controlled conditions. The scenario indicates that the production operations were controlled by the moulding machines, which ejected the products into the collection baskets. The issue is not with the production operations, but with the size of the collection baskets and the condition of the factory floor.
References:
*ISO 9001:2015 Quality management systems - Requirements
*ISO 9001 Lead Auditor Course Material, Module 6: Reporting Audit Findings, Slide 14: Writing Nonconformity Statements
*ISO 9001 Lead Auditor Training Course - IRCA Certified, Section 6.2: Reporting Audit Findings
*Lead Auditor Exam Preparation Guide (EPG) Template - PECB, Section 3.2: Exam Content Outline, Subsection 3.2.1: Section 1 - Audit Fundamentals, Subsection 3.2.2: Section 2 - Audit Principles, Subsection
3.2.3: Section 3 - Audit Process, Subsection 3.2.4: Section 4 - Audit Competencies
NEW QUESTION # 179
XYZ Corporation is an organisation that employs 100 people. As audit team leader, you are conducting a certification audit at Stage 1. When reviewing the quality management system (QMS) documentation, you find that quality objectives have been set for every employee in the organisation except top management.
The Quality Manager complains that this has created a lot of resistance to the QMS, and the Chief Executive is asking questions about how much it will cost. He asks for your opinion on whether this is the correct method of setting objectives.
Three months after Stage 1, you return to XYZ Corporation to conduct a Stage 2 certification audit as Audit Team Leader with one other auditor. You find that the Quality Manager has cancelled the previous quality objectives for all employees and replaced them with a single objective for himself. This states that "The Quality Manager will drive multiple improvements in the QMS in the next year". The Quality Manager indicates that this gives him the authority to issue instructions to department managers when quality improvement is needed. He says that this approach has the full backing of senior management. He shows you the latest Quality Improvement Request that was included in the last management review.
After further auditing, the issues below were found. Select two statements that apply to the term
`nonconformity'.
Answer: B,F
Explanation:
According to the ISO 9001:2015 standard, clause 10.2.1 defines nonconformity as the non-fulfilment of a requirement. A requirement can be related to the quality management system, the products and services, the customer expectations, or the applicable statutory and regulatory requirements. Nonconformities can be detected through various sources, such as audits, inspections, tests, customer complaints, or internal reviews.
Nonconformities must be addressed by taking appropriate actions to correct them and prevent their recurrence.
In this scenario, the auditee has shown several issues that indicate nonconformities in their quality management system. Two statements that apply to the term nonconformity are:
A: No quality objectives planned for the top management team: According to ISO 9001, clause 6.2.1, the organization must establish quality objectives at relevant functions, levels, and processes. The quality objectives must be consistent with the quality policy and the strategic direction of the organization. The top management team is responsible for providing leadership and direction for the quality management system and ensuring its alignment with the organization's purpose and context. Therefore, the absence of quality objectives for the top management team is a nonconformity as it violates the requirement of clause 6.2.1.
E: Quality improvements not aligning with the quality policy: According to ISO 9001, clause 5.2.1, the quality policy is a statement of the organization's intentions and direction regarding quality, as formally expressed by top management. The quality policy must provide a framework for setting quality objectives and be compatible with the context and strategic direction of the organization. The quality policy must also be communicated, understood, and applied within the organization. Therefore, if the quality improvements are not aligned with the quality policy, it is a nonconformity as it violates the requirement of clause 5.2.1.
NEW QUESTION # 180
An audit team of three people is conducting a Stage 2 audit to ISO 9001 of an engineering organisation which manufactures sacrificial anodes for the oil and gas industry in marine environments. These are aluminium products designed to prevent corrosion of submerged steel structures. As one of the auditors, you find that the organisation has shipped anodes for Project DK in the Gulf of Mexico before the galvanic efficiency test results for the anodes have been fully analysed and reported as required by the customer. The Quality Manager explains that the Managing Director authorised the release of the anodes to avoid late delivery as penalties would be imposed. The customer was not informed since the tests rarely fall below the required efficiency. You raise a nonconformity against clause 8.6 of ISO 9001.
During the audit team meeting in preparation for the Closing meeting, the second auditor disagreed with the clause of ISO 9001 selected for the above nonconformity. He thinks it should be clause 9.1.1.
Choose three options for how the audit team leader should best respond to the situation:
Answer: A,C,G
Explanation:
As the audit team leader, it is crucial to manage differing opinions constructively and ensure that the correct clause is selected for the nonconformity based on solid evidence. Here's how the situation should be handled:
E:Invite you and the second auditor to fully explain your point of view and then decide which clause to select: This promotes collaboration and transparency, allowing both auditors to present their rationale for choosing the specific clause.
F: Review the evidence with you and the second auditor, and then decide which clause of ISO 9001 would best apply: Reviewing the evidence in relation to the specific requirements of ISO 9001 is essential for determining which clause is most appropriate.
H: Try to obtain a consensus between you and the second auditor after a discussion of the different opinions:
Consensus-building is a crucial skill for an audit team leader. Achieving agreement ensures the nonconformity is addressed accurately and with full team support.
Options such as overruling immediately (D) or deferring the decision without full discussion (B) could undermine team dynamics and the audit process. Consulting the quality manager (A) or selecting an entirely different clause (G) is unnecessary, as the team should resolve the issue internally.
NEW QUESTION # 181
Which action indicates that an organization is meeting the requirements of ISO 9001 regarding nonconforming outputs?
Answer: B
Explanation:
Comprehensive and Detailed In-Depth Explanation:
ISO 9001:2015 requires organizations to identify and control nonconforming outputs to prevent unintended use or delivery.
Clause References:
* Clause 8.7 (Control of Nonconforming Outputs): Organizations must ensure that nonconforming outputs are identified and controlled to prevent unintended use or delivery.
* Clause 10.2 (Nonconformity and Corrective Action): Requires organizations to take appropriate actions when nonconformities are found, including during or after service provision.
Why is the Correct Answer C?
* If nonconforming products or services are identified after delivery or during service, organizations must take corrective actions to protect customers and stakeholders.
* Actions may include recalls, rework, customer notifications, compensation, or process improvements.
* This approach aligns with ISO 9001:2015, ensuring that products/services consistently meet requirements.
Why are the Other Options Incorrect?
* A (Retaining documentation only) # While documentation is required, it alone does not ensure proper handling of nonconforming outputs.
* B (Verifying conformity before correction) # While verification is good practice, ISO 9001 prioritizes corrective action over mere verification.
* D (Allowing employees to handle nonconformities without structure) # ISO 9001 requires documented procedures for handling nonconformities (Clause 8.7).
NEW QUESTION # 182
......
How do you arrange the day? Many people may have different ways and focus of study in the different time intervals, but we will find that in real life, can take quite a long time to learn ISO-9001-Lead-Auditor learning questions to be extremely difficult. You may be taken up with all kind of affairs, so you have little time for studying on our ISO-9001-Lead-Auditor Exam Braindumps. But we can claim that our ISO-9001-Lead-Auditor practice engine is high-effective, as long as you study for 20 to 30 hours, you will be able to pass the exam.
New ISO-9001-Lead-Auditor Exam Prep: https://www.dumpsking.com/ISO-9001-Lead-Auditor-testking-dumps.html
DOWNLOAD the newest DumpsKing ISO-9001-Lead-Auditor PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1YqyP-dJ5q8pszC_ho25Qwnl3G1v7YxvR