BTW, DOWNLOAD part of ITPassLeader NSE5_FSW_AD-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1ceDkhU-Hzed69naaDjXu6Kw1DfDVHGpq
Many candidates do not have actual combat experience, for the qualification examination is the first time to attend, so about how to get the test Fortinet certification didn't own a set of methods, and cost a lot of time to do something that has no value. With our NSE5_FSW_AD-7.6 exam Practice, you will feel much relax for the advantages of high-efficiency and accurate positioning on the content and formats according to the candidates' interests and hobbies. Numerous grateful feedbacks form our loyal customers proved that we are the most popular vendor in this field to offer our NSE5_FSW_AD-7.6 Preparation questions.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Brain NSE5_FSW_AD-7.6 Exam <<
The Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) practice exam software in desktop and web-based versions has a lot of premium features. One of which is the customization of Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) practice exams. The NSE5_FSW_AD-7.6 Practice Tests are specially made for the customers so that they can practice unlimited times and improve day by day and pass Fortinet NSE5_FSW_AD-7.6 certification exam with good grades.
NEW QUESTION # 55
Refer to the exhibit.
The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports, and these ports are connected to endpoints which are powered by PoE.
Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?
Answer: D
Explanation:
To cause endpoints to exchange PoE information and negotiate power with the managed FortiSwitch via LLDP, you should configure the LLDP profile to include power management in the advertised LLDP-MED TLVs. Here are the steps:
* Access the LLDP Profile Configuration:Start by entering the LLDP profile configuration mode with the command:
config switch-controller lldp-profile
edit "LLDP-PROFILE"
* Enable MED-TLVs:Ensure that MED-TLVs (Media Endpoint Discovery TLVs) are enabled. These TLVs are used for extended discovery relating to network policies, including PoE, and are essential for PoE negotiation. They include power management which is crucial for the negotiation of PoE parameters between devices. The command to ensure network policies are set might look like:
set med-tlvs network-policy
* Add Power Management TLV:Specifically add or ensure the power management TLV is part of the configuration. This will advertise the PoE capabilities and requirements, enabling dynamic power allocation between the FortiSwitch and the connected devices (like VoIP phones or wireless access points). This can typically be done within the network-policy settings:
config med-network-policy
edit <policy_index>
set poe-capability
next
end
* Save and Apply Changes:Exit the configuration blocks properly ensuring changes are saved:
End
* Verify Configuration:It's always good practice to verify that your configurations have been applied correctly. Use the appropriateshoworgetcommands to review the LLDP profile settings.
By adding the power management as part of LLDP-MED TLVs, the FortiSwitch will be able to communicate its power requirements and capabilities to the endpoints, thereby facilitating a dynamic power negotiation that is crucial for efficient PoE utilization.
References:For more detailed information and additional configurations, you can refer to the FortiSwitch Managed Switches documentation available on Fortinet's official documentation site:Fortinet Product Documentation
NEW QUESTION # 56
Which two rules used by MSTP are similar to rules used by other STP methods? (Choose two.)
Answer: A,C
Explanation:
"MSTP is based on RSTP", so the same port role election and the same root bridge selection. Reference:
FortiSwitch 7.2 Study Guide, page 187
NEW QUESTION # 57
Refer to the exhibit.
Port24 is the only uplink port connected to the network where you need access to FortiSwitch management services. However, FortiSwitch is not accessible on its management interface with IP address 10.0.13.3.
Based on the configuration shown in the exhibit, which two actions should you take to fix the issue and access FortiSwitch? (Choose two answers)
Answer: A,D
Explanation:
According to theFortiSwitchOS 7.6 Administration Guide (Page 320), management traffic on a FortiSwitch is associated with a specific logical interface, which in this case is the " internal " interface. The exhibit shows that the " internal " interface is configured onVLAN 4094(both as native and allowed). This means that for any management traffic (such as HTTPS, SSH, or SNMP) to reach the switch CPU, it must be able to traverse the physical uplink on VLAN 4094.
However, the configuration forport24(the uplink) is currently restricted. It is set withnative VLAN 100and an allowed-vlans list that only includes100 and 200. Because VLAN 4094 is not included in the allowed list of port24, all frames belonging to the management VLAN (4094) are dropped by the switch ' s ingress/egress filters on the uplink.
To resolve this and restore management access, the administrator has two valid configuration paths based on the provided options:
* Option B:Change thenative VLAN on port24 to VLAN 4094. By making 4094 the native VLAN, untagged management traffic can traverse the port, effectively allowing the " internal " interface to communicate with the network.
* Option D:Add VLAN 4094 to the allowed VLANs on port24. This ensures that VLAN 4094 is no longer filtered out, allowing management frames to pass through the uplink while maintaining the current native VLAN for other traffic.
Option C is irrelevant as removing a working VLAN (200) does not help the management traffic. While Option A describes an alternate architectural approach (moving management into an already-allowed VLAN), Options B and D represent the direct fixes for the mismatch described in the 7.6 administration documentation.
NEW QUESTION # 58
Which statement about 802.1X security profiles using MAC-based authentication mode is true?
Answer: C
Explanation:
Pag 232, FortiSwitch_7.6_Study_Guide-Online " However, if you want to authenticate each device behind a port, and optionally, grant each device a different access level based on the credentials provided, then MAC- based is required. " According to theFortiSwitchOS 7.6 Administration Guideand theFortiLink Guide (FortiOS 7.6), FortiSwitch supports two primary modes for 802.1X authentication:port-basedandMAC-based.
In802.1X port-based authentication, once a single supplicant (user or device) successfully authenticates, the physical port is transitioned to an " authorized " state, allowing all traffic from any device connected to that port (e.g., through a hub or unmanaged switch) to pass through. This is summarized by Option D, which is incorrect for MAC-based mode.
In contrast,802.1X MAC-based authentication(Option B) treats each device ' s MAC address as a distinct session. The switch maintains a table of authenticated MAC addresses for each port and applies security policies to each one individually. This granular approach allows the FortiSwitch to grantdifferent access levelsto different devices on the same physical port. For example, a laptop might be assigned to a corporate VLAN with a specific Dynamic Access Control List (DACL), while an IP phone on the same port is assigned to a Voice VLAN.
Furthermore, FortiSwitchOS 7.6 documentation specifies that MAC-based mode can support up to20 devices per port. Each device must provide its own credentials (or be validated via MAC Authentication Bypass), enabling the switch to enforce specific security attributes-such as VLAN IDs, QoS marking, and ingress ACLs-tailored to each uniquely identified device. While the switch typically communicates with aRADIUS server(Option C) for these credentials, MAC-based mode ' s primary functional advantage is this individual session management and authorization flexibility.
NEW QUESTION # 59
Exhibit.
What conditions does a FortiSwitch need to have to successfully configure the options shown in the exhibit above? (Choose two.)
Answer: A,C
Explanation:
Regarding the configuration of a FortiSwitch to split a port into multiple smaller interfaces:
* The CLI commands are enabling a split port into four 10Gbps interfaces (Option B): The command shown in the exhibit is typically used to configure a high-speed port (like a 40Gbps or 100Gbps interface) to be divided into smaller, independent 10Gbps interfaces. This feature allows more flexible use of the switch ' s physical resources.
* The port full speed prior to the split was 100G SFP+ (Option C): Given the context of splitting the port into multiple 10Gbps interfaces, the original port configuration likely supported a high-speed transceiver such as 100G SFP+. This would make it technically feasible to divide the interface into multiple 10Gbps channels, enhancing connectivity options without requiring additional physical interfaces.
These configurations and capabilities are typical in modern network setups, especially in environments requiring high density and flexibility in connectivity, allowing network administrators to optimize physical infrastructure efficiently.
NEW QUESTION # 60
......
Our test engine is an exam simulation that makes our candidates feel the atmosphere of NSE5_FSW_AD-7.6 actual test and face the difficulty of certification exam ahead. It reminds you of your mistakes when you practice NSE5_FSW_AD-7.6 vce dumps next time and you can set your test time like in the formal test. Our NSE5_FSW_AD-7.6 Training Materials cover the most content of the real exam and the accuracy of our NSE5_FSW_AD-7.6 test answers is 100% guaranteed.
Latest NSE5_FSW_AD-7.6 Exam Questions Vce: https://www.itpassleader.com/Fortinet/NSE5_FSW_AD-7.6-dumps-pass-exam.html
DOWNLOAD the newest ITPassLeader NSE5_FSW_AD-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1ceDkhU-Hzed69naaDjXu6Kw1DfDVHGpq