P.S. Free & New 350-701 dumps are available on Google Drive shared by ITPassLeader: https://drive.google.com/open?id=1M2Wos0BhBK8Xn9Pgr1TTsJPX69vnHcub
Many candidates find the Cisco 350-701 exam preparation difficult. They often buy expensive study courses to start their Cisco 350-701 certification exam preparation. However, spending a huge amount on such resources is difficult for many Cisco 350-701 Exam applicants.
Cisco 350-701 exam covers a wide range of topics related to security core technologies, including network security, cloud security, endpoint protection, secure network access, and visibility and enforcement. It's a challenging exam that requires a thorough understanding of the concepts related to Cisco security technologies. 350-701 Exam consists of 90-110 questions and has a time limit of 120 minutes.
>> Cisco 350-701 Clearer Explanation <<
Our 350-701 PDF file is portable which means customers can carry this real questions document to any place. You just need smartphones, or laptops, to access this Implementing and Operating Cisco Security Core Technologies (350-701) PDF format. These Implementing and Operating Cisco Security Core Technologies (350-701) questions PDFs are also printable. So candidates who prefer to study in the old way which is paper study can print 350-701 PDF questions as well.
Cisco 350-701 certification exam is designed for security professionals who want to validate their knowledge and skills in implementing and operating Cisco security technologies. 350-701 exam is part of the CCNP Security certification track, which is an advanced-level certification program that focuses on network security. The Cisco 350-701 Exam covers a wide range of security topics, including network security, cloud security, content security, endpoint protection and detection, secure network access, visibility, and automation.
NEW QUESTION # 450
An engineer is configuring IPsec VPN and needs an authentication protocol that is reliable and supports ACK and sequence. Which protocol accomplishes this goal?
Answer: D
Explanation:
IKEv1 is the authentication protocol that is reliable and supports ACK and sequence for IPsec VPN. IKEv1 is a key management protocol that is used in conjunction with IPsec to establish secure and authenticated connections between IPsec peers. IKEv1 uses UDP port 500 and consists of two phases: phase 1 and phase 2.
In phase 1, the peers authenticate each other and negotiate a shared secret key that is used to encrypt the subsequent messages. In phase 2, the peers negotiate the security parameters for the IPsec tunnel, such as the encryption and authentication algorithms, the lifetime, and the mode (transport or tunnel). IKEv1 uses ACK and sequence numbers to ensure the reliability and integrity of the messages exchanged between the peers.
ACK is an acknowledgment message that confirms the receipt of a previous message. Sequence number is a unique identifier that is assigned to each message to prevent replay attacks and to detect missing or out-of-order messages. IKEv1 also supports various authentication methods, such as pre-shared keys, digital certificates, and extended authentication (XAUTH). References : Internet Key Exchange for IPsec VPNs Configuration Guide, Security for VPNs with IPsec Configuration Guide, IPSec Architecture
NEW QUESTION # 451
Which network monitoring solution uses streams and pushes operational data to provide a near real-time view of activity?
Answer: D
Explanation:
Model-driven telemetry is a new approach for network monitoring in which data is streamed from network devices continuously using a push model and provides near real-time access to operational statistics.
https://blogs.cisco.com/developer/model-driven-telemetry-sandbox
NEW QUESTION # 452
Refer to the exhibit.
An organization is using DHCP Snooping within their network. A user on VLAN 41 on a new switch is complaining that an IP address is not being obtained. Which command should be configured on the switch interface in order to provide the user with network connectivity?
Answer: D
Explanation:
Explanation To understand DHCP snooping we need to learn about DHCP spoofing attack first.
DHCP spoofing is a type of attack in that the attacker listens for DHCP Requests from clients and answers them with fake DHCP Response before the authorized DHCP Response comes to the clients. The fake DHCP Response often gives its IP address as the client default gateway -> all the traffic sent from the client will go through the attacker computer, the attacker becomes a "man-in-the-middle".The attacker can have some ways to make sure its fake DHCP Response arrives first. In fact, if the attacker is "closer" than the DHCP Server then he doesn't need to do anything. Or he can DoS the DHCP Server so that it can't send the DHCP Response.DHCP snooping can prevent DHCP spoofing attacks. DHCP snooping is a Cisco Catalyst feature thatdetermines which switch ports can respond to DHCP requests. Ports are identified as trusted and untrusted.
Only ports that connect to an authorized DHCP server are trusted, and allowed to send all types of DHCP messages. All other ports on the switch are untrusted and can send only DHCP requests. If a DHCP response is seen on an untrusted port, the port is shut down.
The port connected to a DHCP server should be configured as trusted port with the "ip dhcp snooping trust" command. Other ports connecting to hosts are untrusted ports by default.
In this question, we need to configure the uplink to "trust" (under interface Gi1/0/1) as shown below.
NEW QUESTION # 453
When planning a VPN deployment, for which reason does an engineer opt for an active/active FlexVPN configuration as opposed to DMVPN?
Answer: C
NEW QUESTION # 454
A Cisco ESA administrator has been tasked with configuring the Cisco ESA to ensure there are no viruses before quarantined emails are delivered. In addition, delivery of mail from known bad mail servers must be prevented. Which two actions must be taken in order to meet these requirements? (Choose two)
Answer: B,E
Explanation:
We should scan emails using AntiVirus signatures to make sure there are no viruses attached in emails.
Note: A virus signature is the fingerprint of a virus. It is a set of unique data, or bits of code, that allow it to be identified. Antivirus software uses a virus signature to find a virus in a computer file system, allowing to detect, quarantine, and remove the virus.
SenderBase is an email reputation service designed to help email administrators research senders, identify legitimate sources of email, and block spammers. When the Cisco ESA receives messages from known or highly reputable senders, it delivers them directly to the end user without any content scanning. However, when the Cisco ESA receives email messages from unknown or less reputable senders, it performs antispam and antivirus scanning.
We should scan emails using AntiVirus signatures to make sure there are no viruses attached in emails.
Note: A virus signature is the fingerprint of a virus. It is a set of unique data, or bits of code, that allow it to be identified. Antivirus software uses a virus signature to find a virus in a computer file system, allowing to detect, quarantine, and remove the virus.
SenderBase is an email reputation service designed to help email administrators research senders, identify legitimate sources of email, and block spammers. When the Cisco ESA receives messages from known or highly reputable senders, it delivers them directly to the end user without any content scanning. However, when the Cisco ESA receives email messages from unknown or less reputable senders, it performs antispam and antivirus scanning.
Reference:
b_ESA_Admin_Guide_12_0/b_ESA_Admin_Guide_12_0_chapter_0100100.html
-> Therefore Outbreak filters can be used to block emails from bad mail servers.
Web servers and email gateways are generally located in the DMZ so
Note: The recipient access table (RAT), not to be confused with remote-access Trojan (also RAT), is a Cisco ESA term that defines which recipients are accepted by a public listener.
We should scan emails using AntiVirus signatures to make sure there are no viruses attached in emails.
Note: A virus signature is the fingerprint of a virus. It is a set of unique data, or bits of code, that allow it to be identified. Antivirus software uses a virus signature to find a virus in a computer file system, allowing to detect, quarantine, and remove the virus.
SenderBase is an email reputation service designed to help email administrators research senders, identify legitimate sources of email, and block spammers. When the Cisco ESA receives messages from known or highly reputable senders, it delivers them directly to the end user without any content scanning. However, when the Cisco ESA receives email messages from unknown or less reputable senders, it performs antispam and antivirus scanning.
b_ESA_Admin_Guide_12_0/b_ESA_Admin_Guide_12_0_chapter_0100100.html
-> Therefore Outbreak filters can be used to block emails from bad mail servers.
Web servers and email gateways are generally located in the DMZ so
b_ESA_Admin_Guide_12_0/b_ESA_Admin_Guide_12_0_chapter_0100100.html
-> Therefore Outbreak filters can be used to block emails from bad mail servers.
Web servers and email gateways are generally located in the DMZ so
Note: The recipient access table (RAT), not to be confused with remote-access Trojan (also RAT), is a Cisco ESA term that defines which recipients are accepted by a public listener.
NEW QUESTION # 455
......
350-701 Latest Exam Camp: https://www.itpassleader.com/Cisco/350-701-dumps-pass-exam.html
BTW, DOWNLOAD part of ITPassLeader 350-701 dumps from Cloud Storage: https://drive.google.com/open?id=1M2Wos0BhBK8Xn9Pgr1TTsJPX69vnHcub