Compared to other products in the industry, our AZ-802 actual exam has a higher pass rate. If you really want to pass the exam, this must be the one that makes you feel the most suitable and effective. According the data which is provided and tested by our loyal customers, our pass rate of the AZ-802 Exam Questions is high as 98% to 100%. It is hard to find such high pass rate in the market. And the quality of the AZ-802 training guide won't let you down.
| Section | Objectives |
|---|---|
| Topic 1: Manage hybrid compute and virtualization | - Virtual machines
|
| Topic 2: Disaster recovery and migration | - Backup and restore
|
| Topic 3: Implement and manage high availability | - Failover clustering
|
| Topic 4: Networking and storage infrastructure | - Networking
|
| Topic 5: Monitoring and troubleshooting | - Diagnostics
|
| Topic 6: Secure Windows Server hybrid infrastructures | - Identity and access management
|
On the one hand, our company hired the top experts in each qualification examination field to write the AZ-802 training materials, so as to ensure that our products have a very high quality, so that users can rest assured that the use of our research materials. On the other hand, under the guidance of high quality research materials, the rate of adoption of the AZ-802 Study Materials preparation is up to 98% to 100%. Of course, it is necessary to qualify for a qualifying exam, but more importantly, you will have more opportunities to get promoted in the workplace.
NEW QUESTION # 512
With which servers can Server1 and Server3 communicate? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Exhibit
Answer:
Explanation:
Explanation:
Server1 can communicate with: Server2, Server3, and Server4. Server3 can communicate with: Server1 and Server2 only.
Server4 has no isolation connection security rule configured at all, so it never attempts or performs IPsec authentication with any peer. Server1 ' s rule only requests IPsec in both directions rather than requiring it, meaning that if IPsec negotiation does not occur -- as with Server4, which has no IPsec capability configured
-- the connection still falls back to succeed in the clear; Server1 can therefore reach Server2, Server3, and Server4. Server3 ' s rule requires IPsec in both directions, meaning a connection only succeeds if IPsec authentication is actually negotiated. Server3 can successfully negotiate IPsec with Server1 (whose " request " setting means it will still respond to and complete an IPsec negotiation when the peer requires it) and with Server2 (which requires inbound and requests outbound IPsec, and likewise supports negotiation), so both of those connections succeed. Server3 cannot successfully negotiate IPsec with Server4, since Server4 has no IPsec capability configured at all, and Server3 ' s " require " setting blocks any connection that cannot be authenticated via IPsec. Therefore, Server1 can communicate with Server2, Server3, and Server4, while Server3 can communicate with only Server1 and Server2.
NEW QUESTION # 513
You have a server named Server1 that has the Hyper-V server role installed. Server1 hosts the virtual machines shown in the following exhibit: VM1 (configuration version 10.0, Running), VM2 (configuration version 9.0, Running), VM3 (configuration version 8.0, Running). Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
[Answer choice] can have production checkpoints. = VM1, VM2, and VM3
[Answer choice] can be hibernated. = Only VM1 and VM2
Hyper-V gates certain features by the virtual machine ' s configuration version (the number reported by Get- VM, which reflects which Hyper-V feature set the VM can use, independent of the current host ' s own version as long as the host supports at least that version). Production checkpoints were introduced at VM configuration version 6.2 and have remained supported at every version since; because VM1 (10.0), VM2 (9.0), and VM3 (8.0) are all at or above that 6.2 floor, all three virtual machines can use production checkpoints, regardless of their differing configuration versions. Hibernation support for a Hyper-V virtual machine, however, was introduced later, at configuration version 9.0, and is not available on VMs below that version. VM1 (10.0) and VM2 (9.0) both meet or exceed the 9.0 minimum and can therefore be hibernated, while VM3, at configuration version 8.0, falls below that threshold and cannot be hibernated no matter what host version Server1 is running, since the limitation is inherent to the VM ' s own configuration version rather than to Server1. Administrators who need to enable hibernation on VM3 would first need to run Update- VMVersion against it (which is a one-way, non-reversible upgrade) to bring it to at least version 9.0.
NEW QUESTION # 514
Which groups can you add to Group3, and which groups can you add to Group5? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Group3: Group1, Group2, Group4, and Group5 only. Group5: Group4 only.
Group nesting in AD DS is governed strictly by group scope, independent of whether a group is security- or distribution-type. A Domain Local group can contain user accounts, Global groups from any domain, and Universal groups from any domain, plus other Domain Local groups from its own domain only. Group3 is a Domain Local group in contoso.com, so it can accept Group1 (Universal, contoso.com), Group2 (Global, contoso.com), and Group4 and Group5 (both Global, canada.contoso.com), since Global groups from any domain are valid Domain Local members. It cannot accept Group6, because Group6 is Domain Local in canada.contoso.com, a different domain, and Domain Local groups may only nest other Domain Local groups from their own domain. That gives Group3: Group1, Group2, Group4, and Group5 only. A Global group, by contrast, can contain only user accounts and other Global groups from the same domain. Group5 is Global in canada.contoso.com, so among the remaining groups only Group4 qualifies, since it is also Global and in the same domain; Group1 (Universal), Group2 (Global but a different domain), and Group6 (Domain Local) are all excluded by scope rules. That gives Group5: Group4 only.
NEW QUESTION # 515
You need to meet the technical requirements for VM3. On which volume can you enable Data Deduplication?
Answer: A
Explanation:
Data Deduplication is a Windows Server file-and-storage feature that can only be enabled on NTFS-formatted data volumes; it cannot be enabled on the operating system (boot/system) volume, and it does not support ReFS or FAT/exFAT volumes at all. VM3 ' s volumes are C (NTFS, the operating system volume), D (NTFS, a data volume), E (ReFS), and F (exFAT). Volume C is excluded because Deduplication is never supported on the volume that hosts the operating system, even though its file system is NTFS. Volume E is excluded because Data Deduplication has no ReFS support in general-purpose deployments; ReFS uses its own separate storage-efficiency mechanisms such as block cloning, not the Deduplication feature. Volume F is excluded because exFAT is a lightweight file system with no support for Windows Server roles or features such as Deduplication, which depends on NTFS-specific metadata structures. That leaves volume D as the only NTFS data volume that is neither the boot volume nor formatted with an unsupported file system, so it is the only volume on which Data Deduplication can currently be enabled, making option C correct.
NEW QUESTION # 516
You have an Azure virtual machine named VM1 that has the Web Server (IIS) server role installed. VM1 hosts a critical line-of-business (LOB) application. After the security team at your company deploys a new security baseline to VM1, users begin reporting that the application is unresponsive. You suspect that the security baseline has caused networking issues. You need to perform a network trace on VM1. What should you do?
Answer: D
Explanation:
The Azure Performance Diagnostics tool, enabled from the Performance diagnostics blade of a virtual machine in the Azure portal, includes an Advanced performance analysis scenario that captures a network trace alongside performance counters, Xperf traces, and StorPort traces in a single guided run, making it the built-in, portal-driven way to obtain a network trace for an Azure VM without needing to manually install or run separate tracing tools by hand. Performance Monitor Data Collector Sets can gather performance counters and event trace logs but do not perform a packet-level network capture, and configuring the general Diagnostics settings for VM1 in the Azure portal collects boot diagnostics, metrics, and logs rather than a network trace. There is also no standard built-in Windows utility matching the exact name given in the first option. Because Performance Diagnostics packages the completed trace and its findings for download and analysis, and specifically targets exactly this kind of post-configuration-change networking investigation, configuring the Performance diagnostics settings for VM1 is the correct action.
NEW QUESTION # 517
......
To make sure that our customers who are from all over the world can understand the content of the AZ-802 exam questions, our professionals try their best to simplify the questions and answers and add some explanations to make them more vivid. So you will find that the unique set of our AZ-802 Practice Guide is the easiest and containing the most rewarding content, you can never found on any other website. And you will love our AZ-802 learning materials as long as you have a try on them!
High AZ-802 Passing Score: https://www.practicedump.com/AZ-802_actualtests.html