350-501 Exam Guide Materials & Valid 350-501 Exam Testking

BTW, DOWNLOAD part of Real4exams 350-501 dumps from Cloud Storage: https://drive.google.com/open?id=1LfgoFRm0rRy1xnFEPwhfulcMV24a1os-

Our 350-501 learning guide allows you to study anytime, anywhere. If you are concerned that your study time cannot be guaranteed, then our 350-501 learning guide is your best choice because it allows you to learn from time to time and make full use of all the time available for learning. Our online version of 350-501 learning guide does not restrict the use of the device. You can use the computer or you can use the mobile phone. You can choose the device you feel convenient at any time.

Cisco 350-501 Exam Syllabus Topics:

Section	Weight	Objectives
Automation and Assurance	20%	- Configure and verify NETCONF/RESTCONF - Implement network assurance with Cisco DNA Center - Describe Cisco NSO - Configure and verify YANG models - Describe the programmable, software-defined network - Describe telemetry - Describe automation and assurance tools
Networking	25%	- Implement routing policy language and route maps - Implement IS-IS - Describe BGP path selection algorithm - Implement BGP - Troubleshoot routing protocols - Implement OSPF - Describe IPv6 transition - Implement MPLS - Implement segment routing
Services	20%	- Configure L2VPN and Carrier Ethernet - Describe VPN technologies - Implement multicast services - Implement QoS services - Configure L3VPN - Describe broadband subscriber services
MPLS and Segment Routing	20%	- Implement MPLS Layer 2 VPNs - Describe MPLS OAM - Implement segment routing traffic engineering (SR-TE) - Implement segment routing - Implement MPLS Layer 3 VPNs - Describe EVPN
Core Architecture	15%	- Configure and verify control plane security - Describe service provider architectures - Describe Cisco network software architecture - Describe management plane security - Describe QoS architecture - Describe service provider virtualization - Implement data plane security

>> 350-501 Exam Guide Materials <<

Valid Cisco 350-501 Exam Testking & Latest 350-501 Test Voucher

We will refund your money if you fail to pass the exam after buying 350-501 study materials. If you choose us, we will ensure you pass the exam. And we are pass guaranteed and money back guaranteed. Besides, 350-501 study materials of us will help you pass the exam just one time. With professional experts to compile the 350-501 Exam Dumps, they are high- quality. And we also have online and offline chat service stuff, who possess the professional knowledge about the 350-501 study materials, and if you have any questions, just contact us, we will give you reply as quickly as possible.

Cisco Implementing and Operating Cisco Service Provider Network Core Technologies Sample Questions (Q191-Q196):

NEW QUESTION # 191
Refer to the exhibit:

Which statement describes this configuration?

A. Router 1 has a new data store to collect SNMP information, but configuration must still be done at the CLI only
B. Router 1 can be remotely managed by the CLI using Telnet
C. Router 1 has its running configuration locked so changes can be made only when the administrator issues a kill session
D. Router 1 has a temporary data store where a copy of the running configuration can be manipulated and verified before committing the configuration

Answer: D

NEW QUESTION # 192
Refer to the exihibit.

Refer to the exhibit. ISP_A and ISP_B use AS numbers 38321 and 16213 respectively. After a network engineer reloaded router R1, the BGP session with R2 failed to establish. The engineer confirmed BGP next-hop availability with a connectivity test between the router loopback addresses 10.121.123.2 and 10.121.123.1, as well as between interfaces Gi1/1 and Gi1/2. EBGP multihop has been configured on both routers. Which action must the engineer take to resolve the issue?

A. Configure remote-as 16213 on R1.
B. Configure transport connection-mode passive on R2.
C. Configure neighbor 172.16.172.1 authentication on R1
D. Configure neighbor update-source lo0 on R2

Answer: D

Explanation:
After a router reload, BGP sessions may fail to re-establish due to incorrect source interface configurations for BGP sessions. Since EBGP multihop has been configured, it's essential that the BGP session uses the correct source interface for establishing the connection. By configuring the neighbor update-source command with the loopback interface on R2, the BGP session will use the stable loopback address rather than the physical interface, which can change state. This ensures that the BGP session remains stable and is not affected by interface states. Reference: BGP Troubleshooting Cheat Sheet With Examples - Catchpoint2, BGP session stuck in Idle state after NSRP failover - Juniper Networks3, BGP Session is Disconnected - Network Playbook

NEW QUESTION # 193
The network team is planning to implement IPv6 on the company's existing IPv4 network infrastructure. The network currently uses IS-IS to share routes between peers. Which task must the team perform so that IS-IS will run in multitopology mode on the updated IPv6 network?

A. Configure the IS-IS IPv6 metric on the dual-stack links.
B. Configure the links between the network routers as point-to-point.
C. Configure the network routers to use metric-style wide.
D. Configure the network routers as Level 2 routers.

Answer: C

Explanation:
When multitopology support for IPv6 is used, use the metric-style widecommand to configure IS- IS to use new-style TLVs because TLVs used to advertise IPv6 information in link-state packets (LSPs) are defined to use only extended metrics.

NEW QUESTION # 194
An engineer working for a private telecommunication company with an employe id:3948:613 needs to limit the malicious traffic on their network. Which configuration must the engineer use to implement URPF loose mode on the GigabitEthernet0/1 interface?

Answer: A

Explanation:
* The configuration in Option A is used to implement URPF in loose mode on the GigabitEthernet0/1 interface.
* Loose mode allows the router to check for any route back to the source, not necessarily the best route.
* By enabling URPF, the router ensures that incoming packets have a valid return path in the routing table.
* This helps prevent IP spoofing and limits malicious traffic on the network.
:
Implementing and Operating Cisco Service Provider Network Core Technologies On-Demand E-Learning

NEW QUESTION # 195
What is the purpose of DS-Lite technology?

A. It allows network administrators to transition a network to IPv6 while maintaining IPv4 support.
B. It enables networks to pass encapsulated IPv4-in-IPv6 traffic over the ISP backbone.
C. It allows network administrators to implement shared IPv4 addresses between the ISP and its customers.
D. It allows an ISP to service IPv6 networks over an IPv4-enabled ISP backbone.

Answer: B

Explanation:
Dual-Stack Lite enables IPv4 packets from customer networks to be encapsulated inside IPv6 and transported across an IPv6-only ISP backbone. The IPv4 traffic is tunneled to a carrier-grade NAT device in the provider network, allowing continued IPv4 connectivity without requiring native IPv4 support throughout the ISP core.

NEW QUESTION # 196
......

One of the best features of Cisco 350-501 exam dumps is its Implementing and Operating Cisco Service Provider Network Core Technologies exam passing a money-back guarantee. Now with Real4exams 350-501 exam dumps your investment is secured with a money-back guarantee. If you fail in Cisco 350-501 Exam despite using Real4exams Exam Questions you can claim your paid amount.

Valid 350-501 Exam Testking: https://www.real4exams.com/350-501_braindumps.html

DOWNLOAD the newest Real4exams 350-501 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1LfgoFRm0rRy1xnFEPwhfulcMV24a1os-