The Best Juniper JN0-364 Exam Questions

What's more, part of that TestsDumps JN0-364 dumps now are free: https://drive.google.com/open?id=1VTbDmhL7jVFXRF_ohagU2oRxF8k4YfA3

What are you waiting for? Unlock your potential and download TestsDumps actual JN0-364 questions today! Start your journey to a bright future, and join the thousands of students who have already seen success by using Juniper Dumps of TestsDumps, you too can achieve your goals and get the Juniper JN0-364 Certification of your dreams. Take the first step towards your future now and buy JN0-364 exam dumps. You won't regret it!

Juniper JN0-364 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Multiprotocol Label Switching (MPLS)	12-18%	- Segment routing basics - Configuration and monitoring - LDP and RSVP - Terminology and forwarding - Labels and LIB
Topic 2: Layer 2 Bridging and VLANs	8-12%	- Bridging concepts - VLANs and trunking - Service provider switching features
Topic 3: High Availability	5-8%	- Nonstop active routing - NSR and GRES concepts - Graceful restart
Topic 4: Intermediate System to Intermediate System (IS-IS)	10-15%	- Adjacencies and levels - PDUs and TLVs - Configuration and monitoring - Metrics and wide metrics
Topic 5: Protocol-Independent Routing	10-15%	- Routing instances and RIB groups - Martian addresses - Static, aggregate, and generated routes - Load balancing - Filter-based forwarding
Topic 6: Border Gateway Protocol (BGP)	20-25%	- Policy and route filtering - Configuration and troubleshooting - Path selection and attributes - Basic operation and message types - IBGP and EBGP
Topic 7: Open Shortest Path First (OSPF)	15-20%	- LSA types and operation - Configuration and troubleshooting - Areas and router types - Link-state database
Topic 8: IPv6	8-12%	- Static and dynamic routing - Autoconfiguration - OSPFv3 and BGP for IPv6 - Address types and format
Topic 9: Spanning Tree Protocols	8-12%	- STP, RSTP, MSTP, VSTP - BPDU and protection features - Port roles and states - Configuration and convergence
Topic 10: Tunnels	5-8%	- GRE and IP-IP tunnels - Tunnel configuration and usage

>> Latest JN0-364 Examprep <<

Valid JN0-364 exam materials offer you accurate preparation dumps - TestsDumps

The internet is transforming society, and distance is no longer an obstacle. You can download our JN0-364 exam simulation from our official website, which is a professional platform providing the most professional JN0-364 practice materials. You can get them within 15 minutes without waiting. What is more, you may think these high quality JN0-364 Preparation materials require a huge investment on them. Actually we eliminate the barriers blocking you from our JN0-364 practice materials. The price of our JN0-364 exam question is quite favourable for you to buy.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q77-Q82):

NEW QUESTION # 77
What is a key differentiator of generate routes from aggregate routes?

A. Generate routes have a default next-hop value of reject.
B. Generate routes cannot be used as a gateway of last resort.
C. Generate routes use a forwarding next hop.
D. Generate routes have a default preference value of 210.

Answer: C

Explanation:
Generated routes are a type of route that can be created to summarize and generate more specific routes within the routing table. Unlike aggregate routes, which summarize existing routes and inherit a next-hop, generated routes do not necessarily have to match an existing route and will have a next- hop of reject by default unless specified otherwise.

NEW QUESTION # 78
You are troubleshooting two OSPF routers that have an adjacency that remains in the ExStart state. What would cause this problem?

A. mismatched subnet settings on the OSPF interfaces
B. mismatched MTU settings on the OSPF interfaces
C. mismatched OSPF hello intervals on the OSPF interfaces
D. mismatched authentication settings on the OSPF interfaces

Answer: B

Explanation:
The problem occurs most frequently when you attempt to run OSPF between a Cisco router and another vendor router. The problem occurs when the maximum transmission unit (MTU) settings for neighboring router interfaces do not match. If the router with the higher MTU sends a packet larger that the MTU set on the neighboring router, the neighbor router ignores the packet.
A mismatched Maximum Transmission Unit (MTU) setting on OSPF interfaces can cause routers to get stuck in the ExStart state. OSPF requires that both sides of a link have the same MTU to form a full adjacency.

NEW QUESTION # 79
Click the Exhibit button.

You have configured an MPLS LSP that begins on R1 and terminates on R5 using the Junos default settings.
Referring to the exhibit, which router will perform only label swap operations?

A. R1
B. R3
C. R4
D. R5

Answer: B

Explanation:
With default MPLS behavior, the ingress router pushes a label, transit routers perform label swaps, the penultimate router pops the label (PHP), and the egress router receives the packet without the transport label. In the path R1-R5, R1 pushes the label, R4 performs the pop as the penultimate hop, and R5 is the egress. Therefore, the only router performing purely label swap operations is the intermediate transit router R3.

NEW QUESTION # 80
Which two steps are required to enable MPLS on a physical interface in Junos? (Choose two.)

A. Add the interface under protocols mpls.
B. Add the loopback interface under protocols mpls.
C. Add family mpls on the interface.
D. Add family mpls on the loopback interface.

Answer: A,C

Explanation:
To enable MPLS on a physical interface in Junos, the family mpls statement must be added to the interface configuration. Additionally, the interface itself must be specified under the protocols mpls section of the configuration.

NEW QUESTION # 81
You are asked to configure interfaces on Juniper devices to support dual VLAN tags.
In this scenario, which two interface statements would accomplish this task? (Choose two.)

A. vlan-tagging
B. flexible-vlan-tagging
C. gigether-options
D. stacked-vlan-tagging

Answer: B,D

Explanation:
Flexible VLAN tagging enables an interface to support multiple VLAN tagging formats, including QinQ configurations that use two VLAN tags.
Stacked VLAN tagging enables the interface to process double-tagged Ethernet frames, allowing an outer service VLAN tag to be added to an inner customer VLAN tag for QinQ deployments.

NEW QUESTION # 82
......

Nowadays passing the JN0-364 test certification is extremely significant for you and can bring a lot of benefits to you. Passing the JN0-364 test certification does not only prove that you are competent in some area but also can help you enter in the big company and double your wage. And our JN0-364 Exam Questions are in good quality. As long as you study with our JN0-364 learning guide, you will find that the content is easily to understand and the displays are enjoyable.

Intereactive JN0-364 Testing Engine: https://www.testsdumps.com/JN0-364_real-exam-dumps.html

DOWNLOAD the newest TestsDumps JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1VTbDmhL7jVFXRF_ohagU2oRxF8k4YfA3