JN0-364 Test Centres | JN0-364 Examcollection Dumps

BTW, DOWNLOAD part of ITCertMagic JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1KYPZBw8Oq8E0Qo4ynj5-3n7hE1fYGtIc

The ITCertMagic is committed from the day first to ace the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam questions preparation at any cost. To achieve this objective ITCertMagic has hired a team of experienced and qualified JN0-364 certification exam experts. They utilize all their expertise to offer top-notch Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam dumps. These Juniper JN0-364 exam questions are being offered in three different but easy-to-use formats.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. MPLS packet header
  • 2. RSVP
  • 3. Labels and the label information base
  • 4. LDP
  • 5. MPLS and routing tables
  • 6. End-to-end packet flow and forwarding
  • 7. MPLS terminology
  • 8. Segment routing with MPLS
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. LDP-signaled Label-Switched Paths (LSPs)
  • 2. Shortest path segment-routing LSPs
  • 3. RSVP-signaled Label-Switched Paths (LSPs)
  • 4. MPLS forwarding
Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. Router ID
  • 2. Designated router and backup designated router
  • 3. OSPF area and router types
  • 4. Link-state advertisement (LSA) packet type
  • 5. OSPF packet types
  • 6. Adjacencies and neighbors
  • 7. Link-state database
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Troubleshooting tools
  • 2. Routing policy application
  • 3. Interfaces and neighbor
Border Gateway Protocol (BGP)- Identify the concepts, operation, or functionality of BGP
  • 1. IBGP and EBGP functionality and interaction
  • 2. BGP basic operation
  • 3. BGP route reflection and confederations
  • 4. Route selection process
  • 5. Attributes
  • 6. BGP message types
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Troubleshooting tools
  • 2. Routing policy application
  • 3. Peers and peer groups
IPv6- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
- Identify the concepts, operation, or functionality of IPv6
  • 1. Dynamic routing - OSPFv3, IS-IS, BGP
  • 2. IPv6 over IPv4 tunneling
  • 3. Static routes
Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Static, aggregate, and generated routes
  • 2. Filter-based forwarding
  • 3. Load balancing
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Static, aggregate, and generated routes
  • 2. Martian addresses
  • 3. Filter-based forwarding
  • 4. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 5. Load balancing
Intermediate System to Intermediate System (IS-IS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Interfaces and adjacencies
  • 2. Troubleshooting tools
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of IS-IS
  • 1. Designated intermediate system (DIS)
  • 2. Type, length, values (TLVs)
  • 3. IS-IS protocol data units (PDUs)
  • 4. Metrics
  • 5. Adjacencies and neighbors
  • 6. Link-state database
  • 7. Levels and areas
Spanning Tree Protocols- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. VSTP
  • 2. STP
  • 3. RSTP
  • 4. MSTP
- Identify the concepts, operation, or functionality of STP
  • 1. VSTP
  • 2. STP
  • 3. RSTP
  • 4. MSTP
Layer 2 Bridging or VLANs- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Interfaces and ports
  • 2. VLANs
  • 3. IRB
  • 4. Provider bridging
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Port modes
  • 3. Tagging
- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Provider bridging (Q-in-Q tunneling)
  • 2. Service provider switching platforms
  • 3. Bridging elements and terminology
  • 4. Virtual Switches
  • 5. Frame processing

>> JN0-364 Test Centres <<

Juniper JN0-364 Test Centres: Service Provider Routing and Switching, Specialist (JNCIS-SP) - ITCertMagic 100% Pass Rate Offer

Comparing to the training institution, our website can ensure you pass the Juniper actual test with less time and money. You just need to use spare time to practice the JN0-364 exam questions and remember key points of test answers. If you get a bad result in the JN0-364 Practice Test, we will full refund you to reduce the loss of your money.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q59-Q64):

NEW QUESTION # 59
In IS-IS, what would you use to control which external routes are installed in the routing table?

Answer: A

Explanation:
An import policy is used to control which routes learned from a routing protocol are accepted into the routing table. In IS-IS, applying an import policy allows the router to filter or modify external routes before they are installed in the routing table.


NEW QUESTION # 60
Which two statements are correct about the way that BGP propagates routes by default?
(Choose two.)

Answer: A,D

Explanation:
By default, BGP will propagate routes learned from EBGP peers to other IBGP peers. However, due to the BGP split-horizon rule, routes learned from one IBGP peer are not re-advertised to another IBGP peer. This behavior is designed to prevent routing information loops within the same AS.


NEW QUESTION # 61
Referring to the exhibit, what must be included in the Route1 configuration when establishing an EBGP session with the ISP?

Answer: A

Explanation:
When establishing an EBGP session, it's necessary to specify both the local AS number and the local address that the session will use. The local address is required for establishing the TCP connection for BGP. The local AS must be specified to identify the autonomous system of the router.


NEW QUESTION # 62
Which two protocols would be used for dynamic routing in IPv6 environments? (Choose two.)

Answer: A,C

Explanation:
The transition to IPv6 requires routing protocols that are capable of carrying 128-bit address information.
Juniper Networks Junos OS supports several "IPv6-ready" protocols for dynamic routing.
1. IS-IS (Option B):
As discussed in previous questions,IS-ISis inherently extensible due to its use ofTLVs (Type, Length, Value)
. To support IPv6, the protocol did not need a major rewrite; instead, new TLVs (such as TLV 236 for IPv6 reachability and TLV 232 for IPv6 interface addresses) were added. A single IS-IS process in Junos can simultaneously carry both IPv4 and IPv6 routing information, making it a highly efficient choice for "dual- stack" service provider backbones.
2. BGP (Option D):
BGP was updated to support multiple protocols throughMultiprotocol Extensions (MP-BGP), defined in RFC 4760. By usingAddress Family Identifiers (AFI)andSubsequent Address Family Identifiers (SAFI), a single BGP session can exchange NLRI (Network Layer Reachability Information) for IPv4 unicast, IPv6 unicast, and even VPNv4/VPNv6 routes. In Junos, this is configured under the family inet6 unicast hierarchy within the BGP protocols configuration.
Why other options are incorrect:
* IGMP (Option A):This is a management protocol for IPv4 multicast (Internet Group Management Protocol). Its IPv6 equivalent isMLD (Multicast Listener Discovery).
* OSPFv2 (Option C):OSPF version 2 is strictly for IPv4. To run OSPF in an IPv6 environment,OSPFv3 must be used, as it was specifically redesigned to handle the IPv6 address space and link-local communication.


NEW QUESTION # 63
Which two protocols are capable of distributing labels for segment routing? (Choose two.)

Answer: C,D

Explanation:
Segment routing labels can be distributed by link-state routing protocols such as IS-IS and OSPF, which have been extended to support segment routing capabilities.


NEW QUESTION # 64
......

We ITCertMagic are growing faster and faster owing to our high-quality latest JN0-364 certification guide materials with high pass rate. Based on our past data, our pass rate of JN0-364 training guide is high up to 99% to 100% recently years. Many customer will become regular customer and think of us once they have exams to clear after choosing our JN0-364 Exam Guide one time. So we have no need to spend much spirits to advertise but only put most into researching and after-sale service. As long as you study with our JN0-364 learning questions, you will find that it is a right choice.

JN0-364 Examcollection Dumps: https://www.itcertmagic.com/Juniper/real-JN0-364-exam-prep-dumps.html

What's more, part of that ITCertMagic JN0-364 dumps now are free: https://drive.google.com/open?id=1KYPZBw8Oq8E0Qo4ynj5-3n7hE1fYGtIc