We also provide timely and free update for you to get more H35-581_V2.0 questions torrent and follow the latest trend. The H35-581_V2.0 exam torrent is compiled by the experienced professionals and of great value. You can master them fast and easily. We provide varied versions for you to choose and you can find the most suitable version of H35-581_V2.0 Exam Materials. So it is convenient for the learners to master the H35-581_V2.0 questions torrent and pass the H35-581_V2.0 exam in a short time.
| Section | Weight | Objectives |
|---|---|---|
| 5G Network Testing and Troubleshooting | 15% | - Testing Methods
|
| 5G Radio Network Planning Fundamentals | 20% | - Radio Propagation and Coverage Principles
|
| 5G Network Planning and Design | 30% | - Site Engineering
|
| 5G Network Optimization | 35% | - Coverage Optimization
|
>> H35-581_V2.0 Valid Test Voucher <<
When you use our H35-581_V2.0 learning guide, we hope that you can feel humanistic care while acquiring knowledge. Every staff at our H35-581_V2.0 simulating exam stands with you. So if you have any confusion about our H35-581_V2.0 exam questions, don't hesitate to ask for our service online or contact with us via email. we will solve your probelm by the first time and give you the most professional suggestions. And we always consider your interest and condition to the first place. That's why so many of our customers praised our warm and wonderful services.
NEW QUESTION # 31
Which of the following parameters determines the PRACH time-domain position?
Answer: D
NEW QUESTION # 32
Which of the following layers is responsible for concatenating RLC PDUs?
Answer: C
Explanation:
The Medium Access Control (MAC) layer is responsible for multiplexing multiple RLC PDUs into a MAC PDU for transmission over the physical transport channel.
In the 5G NR protocol architecture, the Radio Link Control (RLC) layer processes data received from upper protocol layers and constructs RLC PDUs.
RLC supports segmentation and reassembly of RLC Service Data Units (SDUs), depending on the configured RLC operating mode.
However, the NR RLC layer does not perform concatenation of multiple independent RLC SDUs into one RLC PDU in the manner associated with earlier LTE RLC processing.
Instead, each RLC SDU is used to construct an RLC PDU, or is segmented into multiple RLC PDUs when necessary.
These RLC PDUs are subsequently delivered to the MAC layer.
From the MAC perspective, an RLC PDU is received as a MAC SDU. The MAC multiplexing procedure can combine MAC SDUs belonging to one or several logical channels into a single MAC PDU.
The MAC PDU is then transferred to the physical layer through the corresponding transport channel.
PDCP performs functions such as sequence numbering, ciphering, and header compression where applicable.
PHY performs physical-channel processing, modulation, and transmission.
Therefore, option C correctly identifies the layer responsible for combining multiple RLC PDUs for transmission.
Official Reference: 3GPP TS 38.321, Section 4.4, MAC Functions ; TS 38.322, Sections 4.2 and 5, RLC Sublayer and Data Transfer Procedures .
NEW QUESTION # 33
Which of the following channels or signals support closed-loop power control?
Select All that Apply
Answer: A,D
Explanation:
The Physical Uplink Shared Channel (PUSCH) and Physical Uplink Control Channel (PUCCH) support closed-loop transmit-power control in 5G NR.
Closed-loop power control enables the gNodeB to adjust UE transmission power dynamically according to radio-channel conditions, received signal quality, and interference-management requirements.
Option A - PUSCH: The PUSCH carries uplink user data and selected control information. Its transmit- power calculation combines configured open-loop parameters with closed-loop power adjustments communicated through Transmit Power Control (TPC) commands.
These adjustments help maintain reliable uplink reception while limiting unnecessary UE power consumption and inter-cell interference.
Option D - PUCCH: The PUCCH carries uplink control information, including HARQ acknowledgments, scheduling requests, and CSI reports. Its power-control procedure also incorporates TPC commands and the corresponding closed-loop adjustment state.
Option B - PRACH: PRACH uses a random-access transmit-power calculation and power-ramping mechanism. It does not use the conventional PUSCH/PUCCH closed-loop TPC procedure.
Option C - PBCH: PBCH is a downlink broadcast channel transmitted by the gNodeB, so UE uplink closed-loop power control does not apply.
Therefore, PUSCH and PUCCH are the correct selections.
Official Reference: 3GPP TS 38.213, Sections 7.1.1 and 7.2.1, PUSCH and PUCCH Transmit Power Control
; TS 38.321, Random Access Procedure .
NEW QUESTION # 34
Which message is used to provide the LTE frequencies and reselection parameters configured on the 5G side?
Answer: C
Explanation:
System Information Block 5 (SIB5) is the correct answer because it provides information required for inter- Radio Access Technology (inter-RAT) cell reselection from 5G NR to LTE E-UTRA.
When an NR UE operates in RRC_IDLE or RRC_INACTIVE, cell reselection allows it to identify and camp on a more appropriate serving cell according to broadcast network priorities and radio conditions.
The NR network broadcasts the relevant E-UTRA reselection configuration through SIB5.
According to 3GPP TS 38.331, SIB5 contains the carrierFreqListEUTRA information element, identifying LTE carrier frequencies that the UE may evaluate.
It also contains t-ReselectionEUTRA , which determines the applicable inter-RAT reselection timing requirement.
Additional information can include frequency priorities, reselection thresholds, minimum received signal- level requirements, and neighboring-cell restrictions.
These parameters allow the UE to compare candidate LTE cells against the NR serving cell and apply the configured reselection criteria.
The remaining options serve different functions.
SIB3 provides NR intra-frequency cell-reselection information.
SIB4 provides NR inter-frequency cell-reselection information.
SIB6 is not the system information block used to advertise the NR-to-E-UTRA reselection frequency configuration.
Therefore, SIB5 is specifically responsible for supplying the LTE frequencies and associated reselection parameters configured by the NR network.
Official Reference: 3GPP TS 38.331, Section 6.3.1, SIB5 Information Element ; TS 38.304, UE Procedures in Idle Mode and RRC_INACTIVE .
NEW QUESTION # 35
Which of the following timers is specific to 5G networks?
Answer: B
Explanation:
T319 is the correct answer because it is defined in the 5G New Radio (NR) Radio Resource Control (RRC) specification to supervise the RRC connection resume procedure.
5G NR supports three principal RRC states: RRC_IDLE, RRC_CONNECTED, and RRC_INACTIVE. The RRC_INACTIVE state allows a UE to retain its Access Stratum (AS) context while reducing signaling overhead and power consumption.
When a UE in RRC_INACTIVE needs to resume communication, it initiates the RRC connection resume procedure by transmitting an RRCResumeRequest or RRCResumeRequest1 message. Timer T319 supervises this procedure.
If the UE receives an appropriate RRCResume message, T319 is stopped, and the UE restores the relevant radio-bearer configuration and transitions to RRC_CONNECTED.
If T319 expires before successful completion, the UE performs RRC resume failure handling and enters RRC_IDLE.
The remaining timers are also present in LTE:
T300: Supervises RRC connection establishment.
T310: Supports radio-link failure detection.
T311: Supervises cell selection during RRC connection reestablishment.
Therefore, among the listed options, T319 is specifically associated with the NR RRC connection resume procedure.
Official Reference: 3GPP TS 38.331, Sections 5.3.13.3-5.3.13.5, RRC Connection Resume , and Section
7.1.1, RRC Timers .
NEW QUESTION # 36
......
Our H35-581_V2.0 training braindumps are famous for its wonderful advantages. The content is carefully designed for the H35-581_V2.0 exam, rich question bank and answer to enable you to master all the test knowledge in a short period of time. Our H35-581_V2.0 Exam Questions have helped a large number of candidates pass the H35-581_V2.0 exam yet. Hope you can join us, and we work together to create a miracle.
Download H35-581_V2.0 Fee: https://www.dumpstests.com/H35-581_V2.0-latest-test-dumps.html