Fast2test는 오래된 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. Fast2test의 Nutanix인증 NCA-7.5덤프는 업계에서 널리 알려진 최고품질의Nutanix인증 NCA-7.5시험대비자료입니다. Nutanix인증 NCA-7.5덤프는 최신 시험문제의 시험범위를 커버하고 최신 시험문제유형을 포함하고 있어 시험패스율이 거의 100%입니다. Fast2test의Nutanix인증 NCA-7.5덤프를 구매하시면 밝은 미래가 보입니다.
| Section | Objectives |
|---|---|
| Demonstrate and Understand Platform Health and Monitoring | - Alerts, events, and performance monitoring - Support case creation and diagnostic tools - Cluster health checks and resiliency status |
| Recognize Nutanix Solutions and Tools | - Use cases and features of Nutanix management and operational tools - Nutanix solutions, use cases, and features of Nutanix Cloud Infrastructure (NCI) Technologies |
| Describe Cluster Configuration and Maintenance | - Software updates and Life Cycle Management (LCM) - Valid cluster configuration options - Hardware maintenance procedures |
| Describe Nutanix Platform Administration | - Basic virtual networking configuration - Virtual machine management tasks - Storage operations and licensing management |
Fast2test의Nutanix인증 NCA-7.5덤프의 인지도는 아주 높습니다. 인지도 높은 원인은Nutanix인증 NCA-7.5덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. Fast2test의Nutanix인증 NCA-7.5덤프로Nutanix인증 NCA-7.5시험에 도전해보세요.
질문 # 83
An administrator is troubleshooting resource availability within the cluster. As part of the troubleshooting, the administrator wants to build a list of powered-off VMs on the Nutanix cluster.
In order for these VMs to be listed in the Prism Central VM Efficiency widget, how many days must the VMs be powered off to be considered a Dead VM?
정답：C
설명：
Prism Central classifies a virtual machine as a Dead VM after it has remained powered off for at least 30 days. The VM Efficiency capability uses this duration to distinguish temporarily stopped workloads from VMs that are sufficiently inactive to justify administrative review. Consequently, a VM powered off for only
5 or 15 days does not meet the classification threshold, while 45 days exceeds-but does not define-the required minimum.
A Dead VM is not automatically deleted. The classification is an efficiency finding intended to identify resources that may no longer be required. Even while powered off, the VM can continue consuming storage through its virtual disks, snapshots, recovery points, and associated configuration objects. Administrators should therefore validate application ownership, retention requirements, protection policies, and compliance obligations before deleting or archiving it.
The VM Efficiency widget is part of Prism's broader behavioral and capacity-optimization functionality.
Other inefficiency classifications can identify overprovisioned or constrained VMs by evaluating historical resource behavior. The 30-day rule is specifically associated with the powered-off Dead VM condition and should not be confused with utilization-based efficiency findings.
NHCF/NCA reference: Prism Central monitoring, VM efficiency, resource optimization, and behavioral analysis. Official reference: Behavioral Learning Tools and VM Efficiency , specifically the Dead VM classification.
질문 # 84
Which statement best describes the requirement for migrating a vDisk between storage containers in Nutanix AOS?
정답：A
설명：
AOS supports live vDisk migration between storage containers while the vDisk remains attached to a powered-on guest VM. The VM does not need to be shut down or deleted. This capability allows administrators to move individual vDisks or all eligible vDisks associated with a VM to a container providing different storage settings.
Storage-container properties can include replication factor, encryption, compression, deduplication, and erasure coding. Migrating a vDisk to another container is therefore a controlled method of changing the storage characteristics applied to that disk without interrupting the running workload.
The operation does not require cluster maintenance mode, and existing snapshots do not universally need to be deleted. However, important restrictions apply. Migration cannot proceed when an applicable Prism Central storage policy is configured for the associated VM. Protected VMs may also need to be removed from their protection domain or protection policy before migration. The target container must have sufficient free capacity, and operations such as cloning, resizing, or taking new snapshots may be blocked while migration is active.
The essential requirement tested is that the VM may remain powered on during the storage-container migration.
NHCF/NCA reference: Storage operations, vDisk placement, storage containers, and live migration. Official references: Live vDisk Migration , Migrating a vDisk , and Storage Policy Limitation .
질문 # 85
When creating a new VLAN, what should be specified as the VLAN ID if a network interface uses the Native VLAN?
정답：A
설명：
In Nutanix AHV network configuration, VLAN ID 0 represents the native or untagged VLAN. Therefore, when a VM network interface must communicate through the native VLAN on the connected physical-switch port, the administrator specifies VLAN ID 0 while creating the VLAN-backed virtual network.
The native VLAN carries Ethernet frames without a conventional 802.1Q VLAN tag across the applicable switch connection. Nutanix uses the value 0 as the administrative representation for this untagged behavior. It does not mean that an ordinary production VLAN numbered zero is being created on the physical switch. The physical switch port and AHV uplink configuration must still agree on which traffic is treated as native or untagged.
VLAN ID 1 is commonly a switch default but is not Nutanix's required value for designating native-VLAN behavior. VLAN 255 is an otherwise ordinary numerical VLAN identifier and has no special native-VLAN meaning. VLAN 4096 is outside the usable IEEE 802.1Q VLAN range; Nutanix accepts VLAN identifiers through 4094 for normal tagged VLAN configurations.
NHCF/NCA reference: Networking-AHV networking terminology, VLAN-backed virtual networks and virtual network configuration; NCA Section 2, "Identify virtual networking tasks." Official reference: Prism
7.5-Creating a Basic VLAN Subnet .
질문 # 86
Which Nutanix product provides capabilities for advanced insights and automation for troubleshooting applications?
정답：D
설명：
NCM Intelligent Operations provides centralized monitoring, advanced operational analytics, capacity planning, anomaly detection, resource optimization, reporting, and automation. It evaluates infrastructure and workload behavior across managed environments and helps administrators correlate performance conditions with affected applications and resources. Its automation capabilities can initiate predefined actions or playbooks when specified events, alerts, or operational conditions occur.
Nutanix Cloud Infrastructure supplies the core compute, storage, virtualization, networking, resilience, and management foundation. Although it exposes operational metrics through Prism, it is not the dedicated advanced analytics and automation product described in the question. Nutanix Enterprise AI is used to deploy, manage, monitor, and test large language models and inference endpoints. Nutanix Cloud Clusters extends Nutanix infrastructure into supported public-cloud environments but does not itself provide the specialized operational-intelligence feature set.
Intelligent Operations is specifically positioned as an end-to-end operations, monitoring, optimization, and planning solution. It can identify anomalous behavior, inefficient VMs, resource constraints, and capacity risks while reducing manual troubleshooting through automated workflows. References: NCM Intelligent Operations Overview and Nutanix Cloud Monitoring and Intelligent Operations . NHCF alignment:
recognizing Nutanix management and operations products.
질문 # 87
In a Nutanix cluster where compute nodes run ESXi, which hypervisor is required on storage-only nodes added to the cluster?
정답：D
설명：
A Nutanix storage-only node operates with AHV even when the hyperconverged compute nodes in the same cluster use VMware ESXi. The storage-only node contributes storage capacity and runs the Controller VM and required Nutanix services, but it does not host ordinary user VMs. Using AHV on the storage-only node preserves compatibility with the Nutanix storage-only architecture and avoids requiring an additional third- party hypervisor licence solely for a node that supplies storage.
This creates a supported mixed-hypervisor cluster configuration: ESXi remains on the compute-capable HCI nodes, while AHV runs on the storage-only nodes. Administrators must observe the documented restrictions for cluster expansion, network segmentation, maintenance, and workload placement in this configuration.
User workloads remain on the ESXi compute nodes because the AHV storage-only nodes are not available as general VM execution targets.
Hyper-V is not used for this ESXi storage-only-node design. Although AHV is based on KVM technology, the supported Nutanix hypervisor product and configuration is specifically AHV, making generic KVM an incorrect selection. Reference: Prism 7.5 - Storage-Only Nodes . NHCF alignment: compute-only and storage- only node configurations.
질문 # 88
......
Nutanix인증 NCA-7.5시험을 패스하는 지름길은Fast2test에서 연구제작한 Nutanix 인증NCA-7.5시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 Nutanix 인증NCA-7.5시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. Nutanix 인증NCA-7.5시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고Fast2test의Nutanix 인증NCA-7.5시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.
NCA-7.5최신 시험대비자료: https://kr.fast2test.com/NCA-7.5-premium-file.html