在IT行業中工作的人們現在最想參加的考試好像是Fortinet的認證考試吧。作為被廣泛認證的考試，Fortinet的考試越來越受大家的歡迎。其中，NSE6_EDR_AD-7.0認證考試就是最重要的一個考試。這個考試的認證資格可以證明你擁有很高的技能。但是，和考試的重要性一樣，這個考試也是非常難的。要通过考试是有些难，但是不用担心。NewDumps可以帮助你通过NSE6_EDR_AD-7.0考试。
| Section | Objectives |
|---|---|
| Topic 1: Installation and Deployment | - Server and console installation requirements - Agent deployment and onboarding |
| Topic 2: System Administration and Troubleshooting | - System monitoring and health checks - Troubleshooting common FortiEDR issues |
| Topic 3: Threat Detection and Response | - Incident detection and alert handling - Automated response actions and remediation |
| Topic 4: Policy Configuration and Management | - Prevention and detection policies - Policy tuning and exclusions |
| Topic 5: Forensics and Investigation | - Event analysis and telemetry review - Endpoint investigation workflows |
| Topic 6: FortiEDR Architecture and Components | - System architecture and deployment models - FortiEDR components overview (agents, management console, collectors) |
你用過NewDumps的NSE6_EDR_AD-7.0考古題嗎？這個考古題是最近剛更新的資料，包括了真實考試中可能出現的所有問題，保證你一次就可以通過考試。這個考古題可以讓你看到你意想不到的成果。如果你考試失敗NewDumps將會全額退款，所以請放心使用。利用NewDumps的考試資料，你肯定可以得到你想要的成功。
問題 #33
You added three new applications to FortiEDR using only the Path attribute. What are two expected outcomes of this configuration? (Choose two answers)
答案：B,D
解題說明：
The correct answers are A and B .
The FortiEDR 7.0.0 Administration Guide states that newly added applications are disabled by default , which means they are not blocked unless enabled. The guide further explains that the default state can be changed by enabling the Enable Default application state option in the Application Control Manager settings. Therefore, option A is correct.
Option B is also correct because Application Control allows an application to be defined by Hash or by any combination of File Name / Path / Signer . The guide says that the Path field specifies the path to the executable file of the application to be blocked. When using path-based matching, the enforcement is tied to the specified path criteria, not to every possible location of the same file.
Option C is wrong because the file name does not also need to match when only the Path attribute is used.
Option D is wrong because blocking all instances regardless of location applies when only the File Name field is used, not when the match is path-specific. The guide explicitly states that if only the File Name field is filled, the application is blocked no matter where the executable appears.
問題 #34
Refer to the Exhibit:
Based on the FortiEDR status output shown in the exhibit, what are two reasons for the degraded state?
(Choose two answers)
答案：B,D
解題說明：
The correct answers are B and C .
The exhibit shows:
FortiEDR Service: Up
FortiEDR Driver: Up
FortiEDR Status: Degraded (no configuration)
This means the local Collector service and driver are running, but the Collector has not received valid configuration. In FortiEDR, a Collector must register and communicate with the FortiEDR Aggregator to receive its configuration. The guide states that the Collector initially sends registration information to the FortiEDR Aggregator using SSL, sends ongoing health/status/security-event information, and receives its configuration from the Aggregator.
During installation, a non-customized Windows Collector requires the correct Aggregator address , Aggregator port 8081 , and registration password . The guide explicitly states that the Aggregator port should be specified as 8081 , and that the registration password must be entered during installation.
Therefore, an incorrect registration password or incorrect port number can prevent proper registration
/configuration retrieval, resulting in a degraded/no-configuration state.
Option A is not the best answer because Windows Firewall being enabled by itself does not automatically cause this FortiEDR status; only if it blocks required FortiEDR communication would it matter, and the option is too generic. Option D is also not correct as written because the Collector receives configuration from the Aggregator , not directly from the Central Manager. The guide describes Collector-to-Aggregator communication for registration and configuration.
=========
問題 #35
You discovered that a newly installed collector does not display on the Inventory tab in the central manager.
Which two troubleshooting steps must you perform? (Choose two answers)
答案：A,C
解題說明：
The correct answers are B and C .
The FortiEDR 7.0.0 Administration Guide has a specific troubleshooting section named "A FortiEDR Collector does not display in the INVENTORY tab." It states that after a Collector is first launched, it registers with the FortiEDR Central Manager and appears in the Inventory tab. If it does not appear, the first checks are to confirm that the device where the Collector is installed is powered on and has Internet connectivity, and to validate that ports 8081 and 555 are available and not blocked by another third-party product.
Option B is therefore correct in the exam sense because ports 8081 and 555 must be open for FortiEDR communication. More precisely, the Collector communicates with the Aggregator on port 8081 and the Core on port 555 , not directly to the Central Manager in every architecture. The option wording says "between the collector and the central manager," which is technically loose, but the required troubleshooting item is still the port availability.
Option C is also correct because the same guide says to check that the endpoint is powered on and connected.
In practical FortiEDR troubleshooting, this includes confirming the FortiEDR Collector service/driver are running on the endpoint; otherwise the Collector cannot register or report health.
Option A is not listed in the FortiEDR guide as a required step for this issue. Option D is not the best answer because the guide says logs are generally retrieved when Fortinet Support requests them, and Collector logs can only be exported for Collectors in Running status; a newly installed Collector that does not appear in Inventory cannot normally be selected from Central Manager for log export.
問題 #36
Refer to the exhibits.
You are attempting to move a collector into the High Security Collector Group for isolation but encounter an error in the API request as shown in the exhibit. To successfully isolate the collector, which API parameter must you correct? (Choose one answer)
答案：D
解題說明：
The correct answer is A. Set the organization parameter to Default .
From the first exhibit, the API query result for the Collector shows:
* Collector name: Desktop-PC
* Collector group name: Engineering
* Organization: Default
* State: Running
But in the second exhibit, the API request is using:
* organization = Fortinet-Training
* collectors = Desktop-PC
* targetCollectorGroup = High Security Collector Group
That organization value is wrong. The Collector belongs to the Default organization, so the API request must reference the Collector's actual organization. Otherwise FortiEDR cannot locate or move that Collector under the organization specified in the request.
The FortiEDR guide confirms that Collector Groups are used to assign different FortiEDR policies to different Collectors, and that Collectors can be moved between groups/organizations in the Inventory workflow. In Hoster view, FortiEDR shows Collectors from all organizations and allows moving Collectors between organizations, but the organization context must match the Collector being managed.
Option B is wrong because the exhibit shows the API request is authorized; the failure is a 400 Bad Request , not an authentication failure. Option C is wrong because the endpoint shown is already a move/update operation using PUT, and the issue is not the HTTP method. Option D is wrong because Engineering is the current Collector Group. The goal is to move the Collector to High Security Collector Group , so changing the target back to Engineering would not isolate or harden the Collector.
=========
問題 #37
What action does an on-premises reputation server take when it receives a hash request that is not found in its local database? (Choose one answer)
答案：A
解題說明：
The correct answer is C .
The FortiEDR 7.0.0 Administration Guide states that for on-premises deployments, the on-premise reputation service requests missing hashes from the cloud reputation service . If a proxy is not enabled, it requests the missing hashes from the cloud reputation service through the manager nginx . If a proxy is enabled, the on-premises reputation service requests the missing hashes through the proxy.
So, when the local reputation database does not contain the requested hash, the on-premises reputation server does not ignore the request, wait for endpoint input, or automatically block the application. It queries the cloud reputation service for the missing hash reputation data.
=========
問題 #38
......
成千上萬的IT考生通過使用我們的產品成功通過考試，Fortinet NSE6_EDR_AD-7.0考古題質量被廣大考試測試其是高品質的。我們從來不相信第二次機會，因此給您帶來的最好的Fortinet NSE6_EDR_AD-7.0考古題幫助您首次就通過考試，并取得不錯的成績。NewDumps網站幫助考生通過NSE6_EDR_AD-7.0考試獲得認證，不僅可以節約很多時間，還能得到輕松通過NSE6_EDR_AD-7.0考試的保證，這是IT認證考試中最重要的考試之一。
NSE6_EDR_AD-7.0試題: https://www.newdumpspdf.com/NSE6_EDR_AD-7.0-exam-new-dumps.html