Getting certified is a surefire way to advance your career in the IT industry. Nowadays, Fortinet NSEI_OTS_AR-7.6 certification has been one of the hottest exams which many IT candidates chased after. While how to pass the NSEI_OTS_AR-7.6 exam test in an efficient way is another question for all of you. I think our ValidDumps NSEI_OTS_AR-7.6 will do some help. The high hit rate can ensure you 100% pass. The regular updates of the NSEI_OTS_AR-7.6 study material can keep you one step ahead in the real exam. The comprehensive questions with the accurate answers will help you have a good knowledge of the actual test and assist you pass with ease.
| Section | Weight | Objectives |
|---|---|---|
| Network Access Control | 25% | - Authentication and access policies for OT devices - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models |
| Monitoring and Risk Assessment | 25% | - Event handling and logging with FortiAnalyzer 7.6 - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management |
| Asset Management | 25% | - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC |
| Network Security | 25% | - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems - Security automation and threat response |
>> NSEI_OTS_AR-7.6 Real Torrent <<
Free update for 365 days are available for NSEI_OTS_AR-7.6 exam dumps, that is to say, if you buy NSEI_OTS_AR-7.6 study guide materials from us, you can get the latest information for free in the following year. Besides, NSEI_OTS_AR-7.6 exam dumps are compiled by experienced experts, and they are quite familiar with the exam center, and therefore the quality and exam dumps can be guaranteed. And we have online and offline chat service stuff for NSEI_OTS_AR-7.6 Exam Materials, they have professional knowledge for the exam dumps, and if you have any questions about NSEI_OTS_AR-7.6 exam materials, just consult us.
NEW QUESTION # 29
Refer to the exhibit.
Why is the OT View tab not available in the Asset Identity Center section of the FortiGate-1 device? (Choose one answer)
Answer: B
Explanation:
The correct answer is A . The study guide states that "The OT view is not available by default. You must enable it in the Feature Visibility section of the GUI or using the CLI command shown on this slide" and shows config system settings # set gui-ot enable . It also says that "After you enable the feature, the Asset Identity Center contains an Asset Identity List tab and an OT View tab." This directly explains why the OT View tab is missing: the feature that enables the Purdue-style OT display has not been enabled yet.
The OT View is the view that displays devices in a Purdue diagram , and the Asset Identity List also shows the current Purdue level for each device. Because the answer options do not explicitly say enable OT View in Feature Visibility , option A is the intended match, since it refers to enabling the Purdue-related OT display feature. Option B is incorrect because device detection affects visibility of devices, not whether the OT View tab exists. Option C is not supported by the study guide, and option D is also not given as the requirement for showing the OT View tab.
NEW QUESTION # 30
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 31
Refer to the exhibits.
A partial Basic Event Handler page on FortiAnalyzer and the creation of a trigger in a FortiGate device are shown. To improve the protection of your OT network, you want to automate the handling of compromised devices notified through FortiAnalyzer. You have configured an event handler named Alert_trigger as shown in the exhibit. When you create the trigger on the FortiGate device, the Event handler name field does not provide the Alert_trigger option. What two actions must you perform to make the Alert_trigger option available? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are C and D .
Option C is correct because the study guide explains that when "a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" and, in the Security Fabric workflow, "FortiAnalyzer parses the logs and notifies the root FortiGate." This means FortiGate must first have the FortiAnalyzer connection configured so it can consume FortiAnalyzer event handlers and use them in automation. The wizard message in the exhibit also points to this requirement by indicating that a FortiAnalyzer connection must be configured.
Option D is also correct because the study guide explicitly says that in this automation flow "the root FortiGate triggers the action" and shows "Stitches configured on root FortiGate." Therefore, if you want the FortiAnalyzer event handler to appear and be usable for automation, the trigger must be configured on the root FortiGate , not on an arbitrary downstream FortiGate.
Option A is incorrect because + Create is only a GUI control and does not solve the missing-event-handler visibility problem. Option B is not identified in the study guide as the requirement for making a FortiAnalyzer event handler available in the FortiGate automation trigger list.
NEW QUESTION # 32
Refer to the exhibits.
A partial Basic Event Handler page on FortiAnalyzer and the creation of a trigger in a FortiGate device are shown. To improve the protection of your OT network, you want to automate the handling of compromised devices notified through FortiAnalyzer. You have configured an event handler named Alert_trigger as shown in the exhibit. When you create the trigger on the FortiGate device, the Event handler name field does not provide the Alert_trigger option. What two actions must you perform to make the Alert_trigger option available? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are C and D .
Option C is correct because the study guide explains that when "a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" and, in the Security Fabric workflow, "FortiAnalyzer parses the logs and notifies the root FortiGate." This means FortiGate must first have the FortiAnalyzer connection configured so it can consume FortiAnalyzer event handlers and use them in automation. The wizard message in the exhibit also points to this requirement by indicating that a FortiAnalyzer connection must be configured.
Option D is also correct because the study guide explicitly says that in this automation flow "the root FortiGate triggers the action" and shows "Stitches configured on root FortiGate." Therefore, if you want the FortiAnalyzer event handler to appear and be usable for automation, the trigger must be configured on the root FortiGate , not on an arbitrary downstream FortiGate.
Option A is incorrect because + Create is only a GUI control and does not solve the missing-event-handler visibility problem. Option B is not identified in the study guide as the requirement for making a FortiAnalyzer event handler available in the FortiGate automation trigger list.
NEW QUESTION # 33
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Answer: C
Explanation:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
NEW QUESTION # 34
......
Are you preparing to take the Fortinet NSE I - OT Security 7.6 Architect Exam Questions? Look no further! ValidDumps is your go-to resource for comprehensive Fortinet NSEI_OTS_AR-7.6 exam questions to help you pass the exam. With ValidDumps, you can access a wide range of features designed to provide you with the right resources and guidance for acing the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) Exam. Rest assured that ValidDumps is committed to ensuring your success in the NSEI_OTS_AR-7.6 exam. Explore the various features offered by ValidDumps that will guarantee your success in the exam.
NSEI_OTS_AR-7.6 Exam Success: https://www.validdumps.top/NSEI_OTS_AR-7.6-exam-torrent.html