Außerdem sind jetzt einige Teile dieser It-Pruefung 200-301 Prüfungsfragen kostenlos erhältlich: https://drive.google.com/open?id=1Y7ieS2E1C5567OiBzjptv0Rfu97ecuEd
It-Pruefung spezialisiert sich auf die Schulungsunterlagen zur Cisco 200-301 Zertifizierungsprüfung. Mit It-Pruefung brauchen Sie sich keine Sorgen für die Cisco 200-301 Zertifizierungsprüfung zu machen. Die Zertifizierungsantworten von It-Pruefung sind qualitativ hochwertig. Sobald Sie It-Pruefung wählen, können Sie in kurzer Zeit die Prüfung mit einer hohen Note die Cisco 200-301 Zertifizierungsprüfung effizient bestehen und bessere Resultate bei weniger Einsatz erzielen.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Network Fundamentals | 20% | - Identify interface and cable issues (collisions, errors, mismatch) - Compare TCP to UDP - Compare IPv6 address types - Explain the role and function of network components - Describe wireless principles - Compare physical interface and cabling types - Configure and verify IPv6 addressing and prefix - Describe characteristics of network topology architectures - Describe the need for private IPv4 addressing - Describe switching concepts - Explain virtualization fundamentals (virtual machines) - Verify IP parameters for Client OS (Windows, Mac OS, Linux) - Configure and verify IPv4 addressing and subnetting |
| Topic 2: IP Services | 10% | - Explain the function of SNMP in network operations - Configure network devices for remote access using SSH - Describe the use of syslog features including facilities and levels - Describe the capabilities and function of TFTP/FTP in the network - Configure and verify inside source NAT using static and pools - Configure and verify NTP operating in a client and server mode - Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, shaping - Configure and verify DHCP client and relay - Explain the role of DHCP and DNS within the network |
| Topic 3: Security Fundamentals | 15% | - Describe remote access and site-to-site VPNs - Describe security program elements (user awareness, training, and physical access control) - Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics) - Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques) - Differentiate authentication, authorization, and accounting concepts - Configure and verify access control lists - Configure Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security) - Describe wireless security protocols (WPA, WPA2, and WPA3) - Configure device access control using local passwords - Configure WLAN using WPA2 PSK using the GUI |
| Topic 4: IP Connectivity | 25% | - Describe the purpose of first hop redundancy protocol - Configure and verify IPv4 and IPv6 static routing - Configure and verify single area OSPFv2 - Interpret the components of routing table - Determine how a router makes a forwarding decision by default |
| Topic 5: Automation and Programmability | 10% | - Explain how automation impacts network management - Compare traditional campus device management with Cisco DNA Center enabled device management - Describe controller-based and software defined architectures (overlay, underlay, and fabric) - Compare traditional networks with controller-based networking - Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding) - Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible - Interpret JSON encoded data |
| Topic 6: Network Access | 20% | - Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG) - Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP) - Configure and verify interswitch connectivity - Configure the components of a wireless LAN access for client connectivity using GUI only such as WLAN creation, security settings, QoS profiles, and advanced WLAN settings - Describe Cisco Wireless Architectures and AP modes - Configure and verify VLANs (normal range) spanning multiple switches - Configure and verify (Layer 2/Layer 3) EtherChannel (LACP) - Describe AP and WLC management access connections (Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS) - Describe the need for and basic operations of Rapid PVST+ Spanning Tree Protocol |
>> 200-301 Prüfungsaufgaben <<
Möchten Sie die Cisco 200-301 Zertifizierungsprüfung beim ersten Versuch bestehen? Auf der Webseite It-Pruefung werden wir alle Ihrer Wünsche erfüllen und Ihnen versprechen, dass Sie die 200-301 Zertifizierungsprüfung in begrenzter Zeit einmalig bestehen. Denn It-Pruefung verfügt über die Fragenkataloge zur Cisco 200-301 Zertifizierungsprüfung, die von erfahrenen IT-Experten entworfen werden und aus Fragen und Antworten kombiniert sind. Sie werden niemals bereuen, dass Sie It-Pruefung gewählt haben. bearbeitet
773. Frage
Refer to Exhibit.
An engineer is configuring the NEW York router to reach the Lo1 interface of the Atlanta router using interface Se0/0/0 as the primary path. Which two commands must be configured on the New York router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two)
Antwort: B,E
Begründung:
Explanation
Floating static routes are static routes that have an administrative distance greater than the administrative distance (AD) of another static route or dynamic routes. By default a static route has an AD of 1 then floating static route must have the AD greater than 1. Floating static route has a manually configured administrative distance greater than that of the primary route and therefore would not be in the routing table until the primary route fails.
774. Frage
What is the temporary state that switch ports always enter immediately after the boot process when Rapid PVST+ is used?
Antwort: C
Begründung:
When Rapid PVST+ is used, switch ports always enter the blocking state immediately after the boot process
1. The blocking state is the first of the five possible port states in the Rapid PVST+ protocol. In this state, the port does not forward frames but listens to BPDUs to determine the location of the root bridge and the best path to reach it 12. After a port enters the blocking state, it transitions to the listening state and then to the learning state before finally entering the forwarding state. When Rapid PVST+ (Per-VLAN Spanning Tree Plus) is used, switch ports go through a specific state immediately after the boot process. This state is known as the "discarding" state.
775. Frage
Which three commands can you use to set a router boot image? (Choose three.)
Antwort: A,B,E
776. Frage
Refer to the exhibit.
The primary route across Gi0/0 is configured on both routers. A secondary route must be configured to establish connectivity between the workstation networks. Which command set must be configured to complete this task?
Antwort: C
777. Frage
Refer to the exhibit.
An engineer booted a new switch and applied this configuration via the console port. Which additional configuration must be applied to allow administrators to authenticate directly to enable privilege mode via Telnet using a local username and password?
Antwort: B
778. Frage
......
Welche Methode der Prüfungsvorbereitung mögen Sie am meisten? Mit PDF, online Test machen oder die simulierte Prüfungssoftware benutzen? Alle drei Methoden können Cisco 200-301 von unserer It-Pruefung Ihnen bieten. Demos aller drei Versionen von Prüfungsunterlagen können Sie vor dem Kauf kostenfrei herunterladen und probieren. Die beste Methode zu wählen ist ein wichtiger Schritt zum Bestehen der Cisco 200-301. Zweifellos garantieren wir, dass jede Version von Cisco 200-301 Prüfungsunterlagen umfassend und wirksam ist.
200-301 Deutsch Prüfungsfragen: https://www.it-pruefung.com/200-301.html
BONUS!!! Laden Sie die vollständige Version der It-Pruefung 200-301 Prüfungsfragen kostenlos herunter: https://drive.google.com/open?id=1Y7ieS2E1C5567OiBzjptv0Rfu97ecuEd