P.S. Free & New 100-150 dumps are available on Google Drive shared by Test4Sure: https://drive.google.com/open?id=18T5dob2JL3LPqnJf5vNwexgia1puzIM-
The Test4Sure team is updating the Cisco 100-150 study material according to the changes in the syllabus on daily basis. The users will receive 100-150 updates for 365 days so they can prepare according to the updated content. The 24/7 support system has been made for customers to solve their problems and serve them in the best possible ways in order to pass the Cisco Certified Support Technician (CCST) Networking (100-150) certification exam on the first try!
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Endpoints and Media Types | 20% | - Network Devices and Media
|
| Topic 2: Diagnosing Problems | 20% | - Troubleshooting
|
| Topic 3: Networking Standards and Concepts | 23% | - Network Fundamentals
|
| Topic 4: Addressing and Subnets | 20% | - IP Addressing
|
| Topic 5: Network Infrastructures | 17% | - Infrastructure Components
|
>> 100-150 Reliable Test Camp <<
Most users are confident in our Cisco 100-150 Test Questions Pdf, they write and master our questions carefully, so they can always clear exam successfully. If you have any doubt and suggestion about our 100-150 test questions pdf, we are happy that you reply to us. If you fail exam because of our invalid products, once we confirm we will full refund all cost of dumps to you without any condition. Your money will be guaranteed for every user.
NEW QUESTION # 54
Select the statements that are correct about bandwidth and throughput (Choose 3).
Answer: A,B,D
NEW QUESTION # 55
You purchase a new Cisco switch, turn it on, and connect to its console port. You then run the following command:
For each statement about the output, select True or False.
Note: You will receive partial credit for each correct selection.
Answer:
Explanation:
* The two interfaces are administratively shut down :
* False : The output does not show any " shutdown " command under the interfaces, which would indicate that they are administratively shut down. Therefore, they are likely in their default state, which is administratively up.
* The two interfaces have default IP addresses assigned :
* False : The output does not show any IP address configuration. In the default state, interfaces do not have IP addresses assigned unless explicitly configured.
* The two interfaces can communicate over Layer 2 :
* True : By default, interfaces on a switch are Layer 2 interfaces capable of forwarding Ethernet frames. As there is no configuration provided that changes this, it can be assumed they can communicate over Layer 2.
* Interface Status : The absence of the " shutdown " command means the interfaces are not administratively shut down.
* IP Address Assignment : There is no evidence in the output that IP addresses have been assigned to the interfaces, which would typically be shown as " ip address " entries.
* Layer 2 Communication : Switch interfaces in their default state operate at Layer 2, enabling them to forward Ethernet frames and participate in Layer 2 communication.
:
Cisco IOS Interface Configuration: Cisco Interface Configuration
Understanding Cisco Switch Interfaces: Cisco Switch Interfaces
NEW QUESTION # 56
Examine the connections shown in the following image. Move the cable types on the right to the appropriate connection description on the left. You may use each cable type more than once or not at all.
Answer:
Explanation:
Explanation:
Based on the image description provided, here are the cable types matched with the appropriate connection descriptions:
Connects Switch S1 to Router R1 Gi0/0/1 interface Cable Type : = Straight-through UTP Cable Connects Router R2 Gi0/0/0 to Router R3 Gi0/0/0 via underground conduit Cable Type : = Fiber Optic Cable Connects Router R1 Gi0/0/0 to Router R2 Gi0/0/1 Cable Type : = Crossover UTP Cable Connects Switch S3 to Server0 network interface card Cable Type : = Straight-through UTP Cable The choices are based on standard networking practices where:
* Straight-through UTP cables are typically used to connect a switch to a router or a network interface card.
* Fiber optic cables are ideal for long-distance, high-speed data transmission, such as connections through an underground conduit.
* Crossover UTP cables are used to connect similar devices, such as router-to-router connections.
These matches are consistent with the color-coded cables in the image: green for switch connections, yellow for router-to-router connections within the same rack, and blue for inter-rack connections. The use of these cables follows the Ethernet cabling standards.
* Connects Switch S1 to Router R1 Gi0/0/1 interface :
* Cable Type : Straight-through UTP Cable
* Explanation: A straight-through UTP cable is typically used to connect different types of devices, such as a switch to a router.
* Connects Router R2 Gi0/0/0 to Router R3 Gi0/0/0 via underground conduit :
* Cable Type : Fiber Optic Cable
* Explanation: Fiber optic cables are used for long-distance connections, such as those through an underground conduit between buildings.
* Connects Router R1 Gi0/0/0 to Router R2 Gi0/0/1 :
* Cable Type : Crossover UTP Cable
* Explanation: A crossover UTP cable is typically used to connect similar devices directly, such as router to router connections.
* Connects Switch S3 to Server0 network interface card :
* Cable Type : Straight-through UTP Cable
* Explanation: A straight-through UTP cable is typically used to connect a switch to an end device, such as a server.
* Straight-through UTP Cable : Used to connect different devices (e.g., switch to router, switch to server).
* Crossover UTP Cable : Used to connect similar devices directly (e.g., router to router, switch to switch).
* Fiber Optic Cable : Used for long-distance and high-speed connections, often between buildings or data centers.
:
Network Cable Types and Uses: Cisco Network Cables
Understanding Ethernet Cabling: Ethernet Cable Guide
NEW QUESTION # 57
You need to connect a computer's network adapter to a switch using a 1000BASE-T cable.
Which connector should you use?
Answer: D
Explanation:
*1000BASE-T Cable: This refers to Gigabit Ethernet over twisted-pair cables (Cat 5e or higher).
*Connector: RJ-45 connectors are used for Ethernet cables, including those used for 1000BASE-T.
*Coax: Used for cable TV and older Ethernet standards like 10BASE2.
*RJ-11: Used for telephone connections.
*OS2 LC: Used for fiber optic connections.
References:
*Ethernet Standards and Cables: Ethernet Cable Guide
NEW QUESTION # 58
What is the most compressed valid format of the IPv6 address 2001:0db8:0000:0016:0000:001b:2000:0056?
Answer: A
Explanation:
Removing leading zeros yields 2001:db8:0:16:0:1b:2000:56, and collapsing the longest zero run (the fifth hextet) produces 2001:db8:0:16::1b:2000:56.
NEW QUESTION # 59
......
The Cisco 100-150 certification exam also enables you to stay updated and competitive in the market which will help you to gain more career opportunities. Do you want to gain all these Cisco Certified Support Technician (CCST) Networking (100-150) certification exam benefits? Looking for the quick and complete Cisco 100-150 exam dumps preparation way that enables you to pass the 100-150 Certification Exam with good scores? If your answer is yes then you are at the right place and you do not need to go anywhere. Just download the Test4Sure 100-150 Questions and start Cisco Certified Support Technician (CCST) Networking (100-150) exam preparation without wasting further time.
100-150 Valid Exam Preparation: https://www.test4sure.com/100-150-pass4sure-vce.html
BTW, DOWNLOAD part of Test4Sure 100-150 dumps from Cloud Storage: https://drive.google.com/open?id=18T5dob2JL3LPqnJf5vNwexgia1puzIM-