P.S. Kostenlose und neue EDGE-Expert Prüfungsfragen sind auf Google Drive freigegeben von DeutschPrüfung verfügbar: https://drive.google.com/open?id=1FNRvdzyPVN2kQQZlq4YJKwbs2xyBrpp0
IT-Fachleute sind sehr beliebt. Aber die Konkurrenz ist zugleich auch sehr heftig. So beteiligen sich viele IT-Fachleute an der autoritären EDGE EDGE-Expert IT-Zertifizierungsprüfung, um Ihre Position zu konsolidieren. Und unser DeutschPrüfung bietet speziell Bequemlichkeiten für den EDGE EDGE-Expert Kandidaten.
| Section | Weight | Objectives |
|---|---|---|
| Energy Efficiency | 25% | - HVAC Systems
|
| Software & Methodology | 25% | - EDGE Software Interface
|
| EDGE System Overview | 15% | - Building Types & Applicability
|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Water Efficiency & Materials | 25% | - Water Demand
|
>> EDGE-Expert Zertifikatsfragen <<
Fragenkataloge zur EDGE EDGE-Expert Zertifizierungsprüfung von DeutschPrüfung sind zutreffender, autoritärer und leichter zu verstehen als die aus anderen Webseiten. Wählen Sie DeutschPrüfung, werden Sie niemals bereuen. Falls Sie noch ein paar Sorgen haben, können Sie einige kostenlosen Testfragen und Antworten als Testvision durch unsere Webseite DeutschPrüfung herunterladen. Nachdem Sie die Fragenkataloge zur EDGE EDGE-Expert Zertifizierungsprüfung von DeutschPrüfung gekauft haben, können Sie sicherlich erfolgreich bestehen.
30. Frage
Which of the following describes a more efficient lamp?
Antwort: B
31. Frage
A medium-rise building comprises retail on the first two floors with offices on succeeding floors (third to fifth). If one of the tenants on the third floor aims for EDGE certification, which building type should be used?
Antwort: C
Begründung:
The EDGE software requires users to select a building type (typology) to model resource consumption accurately, and the choice depends on the scope of the certification. In this scenario, a tenant on the third floor (an office floor) of a medium-rise building seeks EDGE certification. The EDGE User Guide provides guidance on selecting building types for tenant spaces: "When a tenant within a larger building seeks EDGE certification, the building type should reflect the tenant's space. For an office tenant on the third floor of a mixed-use building, the 'Office' typology should be selected, as the certification applies only to the tenant's space, not the entire building, unless the whole building is being certified" (EDGE User Guide, Section 2.2:
Project Setup). Option A, Office, aligns with this guidance, as the tenant's space is an office. Option B (Retail) is incorrect, as the retail floors are on the first two levels, not the third: "Retail typology would apply if the tenant space were on the retail floors, not the office floors" (EDGE User Guide, Section 2.2: Project Setup). Option C (Mixed-use) is also incorrect, as this typology applies to the entire building, not a single tenant space: "Mixed-use typology is used when the entire building, including all uses (e.g., retail and offices), is being certified, not for individual tenant spaces" (EDGE Methodology Report Version 2.0, Section
2.1: Calculation Approach). Option D (Core and Shell) is typically used for buildings certified up to the core and shell stage, not for tenant fit-outs: "Core and Shell typology applies to buildings certified without tenant fit-outs, focusing on the building envelope and systems, not individual tenant spaces like an office" (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE User Guide further clarifies: "For tenant-led certifications, the typology should match the tenant's use-e.g., 'Office' for an office tenant-even if the building has multiple uses, ensuring the Base Case reflects the tenant's specific consumption patterns" (EDGE User Guide, Section 2.2: Project Setup). Since the tenant on the third floor operates an office, the Office typology (Option A) is the correct choice for EDGE certification.
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 2.1: Calculation Approach; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard.
32. Frage
In the EDGE software, which of the following does NOT produce grey water?
Antwort: D
Begründung:
Within the CBCI EDGE curriculum, greywater is defined as relatively low-contamination wastewater generated from bathing and handwashing activities, typically coming from fixtures such as showers, wash basins, and bathtubs. This type of wastewater is considered suitable for recovery and reuse in certain non- potable applications, depending on local codes and the treatment approach, because it does not contain toilet waste.
A water closet WC produces blackwater, not greywater. Blackwater contains fecal matter and urine and therefore has a much higher pathogen load and organic content. Because of this, it requires more stringent treatment processes and different health and safety controls compared with greywater systems. In EDGE water measures, greywater reuse calculations and strategies are based on sources like showers and hand basins, while toilet discharge is excluded from greywater source assumptions.
Therefore, among the listed fixtures, the one that does not produce greywater in EDGE is the water closet WC, making option D the correct answer.
33. Frage
Which of the following properties of glass are used in EDGE?
Antwort: A
Begründung:
In the CBCI EDGE curriculum, glazing performance is characterized using properties that directly influence solar heat gains through windows, because this is a major driver of cooling energy demand in many climates.
The EDGE software uses Solar Heat Gain Coefficient, which represents the fraction of incident solar radiation that enters the building as heat through the glazing system. A lower SHGC reduces solar heat entering the indoor space, lowering cooling loads and improving the project's energy savings in the improved case.
Shading Coefficient is an older metric that is sometimes referenced in market literature, but EDGE standardizes the glazing solar performance input using SHGC for consistency across regions and products.
Solar Heat Loss Coefficient is not a standard glazing metric used in EDGE; heat loss through glazing is addressed using thermal transmittance measures such as U-value rather than an SHLC parameter. Solar Reflectivity may be relevant for certain roof or surface materials, but it is not the primary glazing property used in EDGE to quantify solar heat admitted indoors. Therefore, the correct glass property used in EDGE among the options provided is SHGC.
34. Frage
Excellence Lawyers wish to obtain an EDGE Advanced certificate for an entire single floor office they own within a high-rise building. What is the way to model this project in EDGE?
Antwort: C
Begründung:
In the CBCI EDGE curriculum, a project can be certified for a defined scope when the owner is pursuing certification for only the area under their control, such as a tenant space, a single owned floor, or a partial building section. In this case, the "project" for EDGE purposes is the single-floor office area owned by Excellence Lawyers, not the entire high-rise. Therefore, the EDGE model must reflect the geometry and specifications of the certified scope only.
That means the envelope inputs should correspond to the office floor's relevant boundaries: external façade walls (if any), glazing areas, and the resulting Window-to-Wall Ratio for that office scope. Internal partitions that adjoin other conditioned spaces are not treated the same as external envelope elements, because they do not drive the same heat transfer to the outdoors. The same principle applies to wall materials and lengths: they must represent the office area being certified, using the actual constructions that apply to that scope.
Modeling the whole building would incorrectly attribute systems and envelope characteristics outside the owner's control and could distort the calculated savings and audit evidence. Hence, the correct approach is to model the office floor only.
35. Frage
......
Sind Sie neugierig, warum so viele Menschen die schwierige EDGE EDGE-Expert Prüfung bestehen können? Ich können Sie beantworten. Der Kunstgriff ist, dass Sie haben die Prüfungsunterlagen der EDGE EDGE-Expert von unsere DeutschPrüfung benutzt. Wir bieten Ihnen: reichliche Prüfungsaufgaben, professionelle Untersuchung und einjährige kostenlose Aktualisierung nach dem Kauf. Mit Hilfe der EDGE EDGE-Expert Prüfungsunterlagen können Sie wirklich die Erhöhung Ihrer Fähigkeit empfinden. Sie können auch das echte Zertifikat der EDGE EDGE-Expert erwerben!
EDGE-Expert Fragenpool: https://www.deutschpruefung.com/EDGE-Expert-deutsch-pruefungsfragen.html
BONUS!!! Laden Sie die vollständige Version der DeutschPrüfung EDGE-Expert Prüfungsfragen kostenlos herunter: https://drive.google.com/open?id=1FNRvdzyPVN2kQQZlq4YJKwbs2xyBrpp0