The NSE7_FSN_AR-7.6 certification is the best proof of your ability. However, it's not easy for those work officers who has less free time to prepare such an NSE7_FSN_AR-7.6 exam, and people always feel fear of the unknown thing and cannot handle themselves with a sudden change. However, our NSE7_FSN_AR-7.6 Exam Questions can stand by your side. And we are determined to devote ourselves to serving you with the superior NSE7_FSN_AR-7.6 study materials. You can have a try on the free demo of our NSE7_FSN_AR-7.6 exam questions, you can understand in detail and make a choice.
| Section | Objectives |
|---|---|
| Enterprise Firewall | - Centralized management and analytics - Authentication and identity - VPN technologies - Advanced firewall deployment - High availability - Troubleshooting - Routing and advanced networking - Security Fabric integration |
| SD-WAN | - SD-WAN architecture - Performance SLA - SD-WAN routing - Overlay VPN - Deployment and troubleshooting - Application steering |
>> Sample NSE7_FSN_AR-7.6 Questions Pdf <<
Our online staff is professionally trained and they have great knowledge on the NSE7_FSN_AR-7.6 study guide. So they can clearly understand your requirements and ideas and then help you make the right choices. When you have purchased our NSE7_FSN_AR-7.6 exam practice, but you do not know how to install it, we can also provide remote guidance to help you complete the installation. All in all, we will always be there to help you until you pass the NSE7_FSN_AR-7.6 Exam and get a certificate.
NEW QUESTION # 61
Refer to the exhibits.
The system administrator settings configured on the root FortiGate and the Security Fabric settings configured on a downstream FortiGate are shown.
When prompted to sign in with Security Fabric to the downstream FortiGate, a user enters the single sign-on (SSO) provider credentials.
What happens next for the user?
Answer: A
Explanation:
The Enterprise Firewall 7.6 Administrator Study Guide explains: "The root FortiGate acts as the identity provider (IdP) and you configure the other devices as service providers (SP)." Therefore, the root FortiGate authenticates the credentials for the AdminSSO administrator, while the downstream FortiGate operates as the SAML service provider.
After successful authentication, the root FortiGate returns a SAML assertion to the downstream FortiGate.
The downstream device then grants access according to its configured SAML administrator profile. The exhibit shows that its Default admin profile is super_admin_readonly. Consequently, the user is logged in to the downstream FortiGate with read-only super-administrator privileges.
The browser can be redirected temporarily to the root FortiGate for identity-provider authentication, but that is not the final access outcome, so option A is incomplete. AdminSSO is the administrator account name, not an access profile, and the user is not left on the root FortiGate, eliminating option C. Because the credentials are successfully authenticated, option D is also incorrect.
References: Enterprise Firewall 7.6 Administrator Study Guide, Security Fabric - Use Case 4: Security Fabric with SAML SSO, page 266; FortiOS 7.6 - Configuring a downstream FortiGate as an SP; FortiOS 7.6 - SSO administrators.
NEW QUESTION # 62
Refer to the exhibit.
Which two statements about the output are true, considering NGFW-1 and NGFW-2 have been up for a week? (Choose two.)
Answer: C,D
Explanation:
The correct answers are A and B.
The exhibit shows:
override: disable
both members are currently in-sync
only port7 appears under HBDEV stats, so it is the active heartbeat interface the cluster is in HA A-P mode Why A is correct:
With override disabled, after a failover the new primary keeps that role when the old primary comes back.
The FortiOS administration guide states:
"When the primary FortiGate rejoins the cluster the secondary FortiGate continues to operate as the primary FortiGate." So if FGVM...649 reboots and FGVM...650 becomes primary, FGVM...650 will remain primary after FGVM...649 rejoins.
Why B is correct:
The study guide states:
"When FortiGate devices configured in an HA cluster lose communication with each other on the heartbeat interface, each FortiGate assumes the role of the primary device." The exhibit shows only port7 as the heartbeat device in HBDEV stats So if port7 is disconnected and heartbeat communication is lost, the cluster can enter a split-brain condition, where both units believe they are primary. The FortiOS administration guide confirms the same behavior: loss of heartbeat communication causes each member to think it is the primary Why the other options are wrong:
C is wrong because configuration synchronization status is specifically used to detect whether secondary members remain synchronized with the primary. If members are no longer synchronized, the status changes from in-sync to out-of-sync D is wrong because the study guide explains that during a configuration change, checksums may differ briefly while changes are copied, but it does not describe this as the secondary initiating a "synchronization reset" So the verified answers are: A, B.
NEW QUESTION # 63
Refer to the exhibit.
An IPsec VPN tunnel is dropping, as shown by the debug output.
Analyzing the debug output, what could be causing the tunnel to go down?
Answer: A
NEW QUESTION # 64
In a transparent VDOM interface, what does the command set forward-domain < domain_ID > do?
Answer: A
Explanation:
In transparent mode, FortiGate forwards traffic at Layer 2, and interfaces in a transparent VDOM belong to the same broadcast domain by default. The Enterprise Firewall 7.6 Administrator Study Guide explains that set forward-domain < domain_ID > subdivides that transparent VDOM into separate broadcast domains.
Fortinet recommends using the VLAN ID as the forward-domain ID where appropriate because it makes the relationship straightforward to identify. Therefore, C correctly describes the command ' s purpose.
The setting is unrelated to FortiManager administrative domains (ADOMs), eliminating A. It does not specifically restrict management traffic, so B is incorrect. Nor does it enable an interface to operate across multiple VLANs as D suggests. Instead, interfaces assigned to different forward domains are Layer 2 isolated from one another within the transparent VDOM.
NEW QUESTION # 65
Which two protocol states indicate that traffic is bidirectional? (Choose two.)
Answer: A,B
Explanation:
The correct answers are A and B .
For UDP , the study guide states this directly: "For UDP, the session state can have only two values: 00 when traffic is only one way, and 01 when traffic is two ways. For ICMP, the protocol state is always
00."
That makes B correct and D incorrect.
For TCP , the study guide explains that the protocol state is a two-digit number, where the first digit is the server-side state and the second digit is the client-side state . It also states that the first digit is 0 when the session is not subject to any inspection , and the TCP state table shows that value 1 = ESTABLISHED So, for a normal non-proxied/non-inspected TCP session, proto_state=01 means the TCP session is in the ESTABLISHED state. An established TCP session means the three-way handshake has completed, which requires traffic in both directions. That is why A is correct.
The study guide also says: "proto_state=11 means that the TCP three-way handshake for both server- side and client-side is completed (ESTABLISHED)." This confirms that TCP state value 1 represents an established state.
Why C is not selected: the study guide defines value 5 as TIME_WAIT and says: "When a session is closed by both the sender and receiver, FortiGate keeps that session in the session table for a few seconds...
This is the state value 5."
So proto_state=05 represents a closing/closed TCP session in TIME_WAIT , not the normal bidirectional state the question is testing.
Therefore, the verified answers are A and B .
NEW QUESTION # 66
......
In order to meet a wide range of tastes, our company has developed the three versions of the NSE7_FSN_AR-7.6 preparation questions, which includes PDF version, online test engine and windows software. According to your own budget and choice, you can choose the most suitable one for you. And if you don't know which one to buy, you can free download the demos of the NSE7_FSN_AR-7.6 Study Materials to check it out. The demos of the NSE7_FSN_AR-7.6 exam questions are a small part of the real exam questions.
NSE7_FSN_AR-7.6 Questions Answers: https://www.vce4plus.com/Fortinet/NSE7_FSN_AR-7.6-valid-vce-dumps.html