2026 Juniper Valid JN0-364 Exam Questions Pdf

2026 Latest Free4Torrent JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1ucbmcAVf-ZBwhx8dXkkAL0ywplrE1XjH

It is a common sense that in terms of a kind of Service Provider Routing and Switching, Specialist (JNCIS-SP) test torrent, the pass rate would be the best advertisement, since only the pass rate can be the most powerful evidence to show whether the JN0-364 Guide Torrent is effective and useful or not. We are so proud to tell you that according to the statistics from the feedback of all of our customers, the pass rate among our customers who prepared for the exam under the guidance of our Service Provider Routing and Switching, Specialist (JNCIS-SP) test torrent has reached as high as 98%to 100%, which definitely marks the highest pass rate in the field. Therefore, you can carry out the targeted training to improve yourself in order to make the best performance in the real exam, most importantly, you can repeat to do the situation test as you like.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Topic 1: Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. MPLS terminology
  • 2. MPLS packet header
  • 3. RSVP
  • 4. LDP
  • 5. End-to-end packet flow and forwarding
  • 6. Segment routing with MPLS
  • 7. MPLS and routing tables
  • 8. Labels and the label information base
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. MPLS forwarding
  • 2. LDP-signaled Label-Switched Paths (LSPs)
  • 3. Shortest path segment-routing LSPs
  • 4. RSVP-signaled Label-Switched Paths (LSPs)
Topic 2: Intermediate System to Intermediate System (IS-IS)- Identify the concepts, operation, or functionality of IS-IS
  • 1. Metrics
  • 2. Levels and areas
  • 3. Designated intermediate system (DIS)
  • 4. IS-IS protocol data units (PDUs)
  • 5. Type, length, values (TLVs)
  • 6. Link-state database
  • 7. Adjacencies and neighbors
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Troubleshooting tools
  • 2. Interfaces and adjacencies
  • 3. Routing policy application
Topic 3: Border Gateway Protocol (BGP)- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Troubleshooting tools
  • 2. Peers and peer groups
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of BGP
  • 1. Route selection process
  • 2. BGP route reflection and confederations
  • 3. BGP message types
  • 4. Attributes
  • 5. BGP basic operation
  • 6. IBGP and EBGP functionality and interaction
Topic 4: Spanning Tree Protocols- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. STP
  • 2. VSTP
  • 3. RSTP
  • 4. MSTP
- Identify the concepts, operation, or functionality of STP
  • 1. STP
  • 2. VSTP
  • 3. RSTP
  • 4. MSTP
Topic 5: Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Load balancing
  • 2. Filter-based forwarding
  • 3. Static, aggregate, and generated routes
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Load balancing
  • 2. Martian addresses
  • 3. Filter-based forwarding
  • 4. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 5. Static, aggregate, and generated routes
Topic 6: Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. Router ID
  • 2. Designated router and backup designated router
  • 3. OSPF packet types
  • 4. Link-state database
  • 5. Link-state advertisement (LSA) packet type
  • 6. OSPF area and router types
  • 7. Adjacencies and neighbors
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Troubleshooting tools
  • 2. Interfaces and neighbor
  • 3. Routing policy application
Topic 7: Layer 2 Bridging or VLANs- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Provider bridging
  • 2. IRB
  • 3. VLANs
  • 4. Interfaces and ports
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Port modes
  • 3. Tagging
- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Frame processing
  • 2. Service provider switching platforms
  • 3. Bridging elements and terminology
  • 4. Provider bridging (Q-in-Q tunneling)
  • 5. Virtual Switches
Topic 8: IPv6- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
- Identify the concepts, operation, or functionality of IPv6
  • 1. IPv6 over IPv4 tunneling
  • 2. Static routes
  • 3. Dynamic routing - OSPFv3, IS-IS, BGP

>> JN0-364 Exam Questions Pdf <<

JN0-364 Exam Vce Format | Latest JN0-364 Real Test

If you buy the JN0-364 training files from our company, you will have the right to enjoy the perfect service. We have employed a lot of online workers to help all customers solve their problem. If you have any questions about the JN0-364 learning materials, do not hesitate and ask us in your anytime, we are glad to answer your questions and help you use our JN0-364 study questions well. We believe our perfect service will make you feel comfortable when you are preparing for your JN0-364 exam.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q66-Q71):

NEW QUESTION # 66
You are deploying an MC-LAG connection at the edge of your network to a new customer. This solution must ensure that traffic uses all available links when forwarding traffic between the two networks.
In this scenario, which two statements are correct? (Choose two.)

Answer: B,C


NEW QUESTION # 67
Referring to the exhibit. Which type of load balancing is shown in the exhibit?

Answer: C

Explanation:
The policy statement shown in the exhibit has a term that specifies load-balance per-packet, which indicates that per-packet load balancing is being used. This means that the routing device will distribute packets out multiple paths on a per-packet basis, rather than on a per-flow (per- destination or per-source-destination pair) basis.


NEW QUESTION # 68
Referring to the exhibit, which two statements are correct? (Choose two.)

Answer: A,C

Explanation:
You can see area 0.0.0.1 set for one interface and area 0.0.0.0 for the other interface. This means the router communicates in the backbone and area 1, thus it is an ABR.
Default hello timer and dead intervals are configured
hello-interval--Specifies the length of time, in seconds, before the routing device sends a hello packet out of an interface. By default, the routing device sends hello packets every 10 seconds.
The range is from 1 through 255 seconds.
dead-interval--Specifies the length of time, in seconds, that the routing device waits before declaring that a neighboring routing device is unavailable. This is an interval during which the routing device receives no hello packets from the neighbor. By default, the routing device waits
40 seconds (four times the hello interval). The range is 1 through 65,535 seconds.
C). The R2 device is shown as having interfaces in two different OSPF areas (Area 0 and another area not specified), which makes it an Area Border Router (ABR).
D). The OSPF hello and dead intervals are set to their default values of 10 and 40 seconds, respectively.


NEW QUESTION # 69
You are designing an MPLS network and want to ensure that traffic traverses an LSP between PE routers that follow an explicit path through the core. Which protocol would accomplish this task?

Answer: D

Explanation:
In a Juniper Networks MPLS environment, the selection of a signaling protocol depends heavily on the requirement for traffic engineering and path control. To satisfy the requirement for anexplicit path-where the network architect defines specific hop-by-hop routers that the traffic must traverse-theResource Reservation Protocol (RSVP)is the necessary choice.
According to Juniper documentation, RSVP (specifically RSVP-TE) supports the use ofExplicit Route Objects (EROs). When you configure an LSP in Junos OS, you can define a path consisting of a series of IP addresses (strict or loose hops). RSVP then signals the LSP along that exact sequence of routers, reserving resources and establishing labels as it goes. This allows for precise control over the network's traffic patterns, enabling administrators to steer traffic away from congested links or toward specific high-bandwidth paths.
In contrast,LDP (Label Distribution Protocol)(Option D) is a "best-effort" signaling protocol. LDP strictly follows the Interior Gateway Protocol (IGP) shortest path. It does not support explicit paths or traffic engineering constraints; it simply builds a "mesh" of labels based on the existing routing table.IS-IS(Option C) is an IGP used to populate the routing table and TED but does not signal labels.BGP(Option A) is used for service delivery (like L3VPNs) but relies on an underlying transport LSP (built by RSVP or LDP) to reach its next hop. Therefore, only RSVP provides the mechanism for explicit path manipulation.


NEW QUESTION # 70
Referring to the exhibit. Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?

Answer: D

Explanation:
In the OSPF routing table output, prefixes are marked with different route types. An external prefix injected into OSPF is marked as 'Ext' (External) followed by a number that indicates whether it's an E1 or E2 route. The prefix 172.18.1.0/24 is marked as Ext2, which indicates that it is an external route that has been redistributed into OSPF from another routing protocol or static configuration.


NEW QUESTION # 71
......

Through continuous development and growth of the IT industry in the past few years, JN0-364 exam has become a milestone in the Juniper exam, it can help you to become a IT professional. There are hundreds of online resources to provide the Juniper JN0-364 questions. Why do most people to choose Free4Torrent? Because Free4Torrent has a huge IT elite team, In order to ensure you accessibility through the Juniper JN0-364 Certification Exam, they focus on the study of Juniper JN0-364 exam. Free4Torrent ensure that the first time you try to obtain certification of Juniper JN0-364 exam. Free4Torrent will stand with you, with you through thick and thin.

JN0-364 Exam Vce Format: https://www.free4torrent.com/JN0-364-braindumps-torrent.html

What's more, part of that Free4Torrent JN0-364 dumps now are free: https://drive.google.com/open?id=1ucbmcAVf-ZBwhx8dXkkAL0ywplrE1XjH