Pass4Test의 API인증 API-SIEE덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. Pass4Test의 API인증 API-SIEE덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이Pass4Test의 API인증 API-SIEE덤프만 공부하시면API인증 API-SIEE시험을 패스하여 자격증을 취득할수 있습니다.
| Certification Vendor: | American Petroleum Institute (API) |
|---|---|
| Exam Name: | API Source Inspector Electrical Equipment (SIEE) |
| Exam Number: | SIEE |
| Certificate Validity Period: | 3 years |
| Exam Duration: | 195 minutes |
| Real Exam Qty: | 110 (100 scored + 10 unscored pretest) |
| Related Certifications: | API Source Inspector Rotating Equipment (SIRE) API Source Inspector Fixed Equipment (SIFE) |
| Exam Format: | Closed-book, Multiple Choice |
| Available Languages: | English |
| Exam Registration: | API ICP Certification Portal |
| Sample Questions: | API API-SIEE Sample Questions |
| Exam Way: | Computer-based / remote proctored exam (scheduled exam windows) |
| Pre Condition: | Prequalification required; relevant electrical or inspection experience in industrial/petroleum environments is typically expected |
| Official Syllabus URL: | https://www.api.org/products-and-services/individual-certification-programs/certifications/apisiee |
Pass4Test의 API인증 API-SIEE덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. Pass4Test의 API인증 API-SIEE덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이Pass4Test의 API인증 API-SIEE덤프만 공부하시면API인증 API-SIEE시험을 패스하여 자격증을 취득할수 있습니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
| 주제 6 |
|
| 주제 7 |
|
| 주제 8 |
|
질문 # 59
In addition to maximum rated voltage, manufacturer's name, trademark and AWG, which of the following markings is required for all conductors and cables?
정답：A
설명：
The correct answer isD. Wire type designator. In electrical inspection practice, conductor and cable identification markings are required so the inspector can verify that the installed or supplied cable matches the approved specification, intended service, insulation system, and voltage class. Standard conductor markings commonly include themanufacturer's name or trademark, conductor size such as AWG, voltage rating, and the cable or wire type designation. Thewire type designatoris essential because it identifies the insulation and use category of the conductor, such as whether it is a specific thermoplastic, thermoset, heat-resistant, wet- location, or other recognized type.
The other options are not universal marking requirements for all conductors and cables.NEC classis not a standard marking item in this context.Country of originmay appear for commercial or regulatory reasons but is not the fundamental conductor marking requirement being asked here.Batch or lot numbermay be used by manufacturers for traceability, but it is not the general required marking for all conductors and cables.
Therefore, the required marking that completes the list is thewire type designator.
질문 # 60
According to API 541, determination of efficiency and power, locked-rotor current, power factor, torque, full- load current and slip are some of the tests verified when performing a:
정답：C
설명：
The correct answer isAbecause the group of performance items listed in the question-efficiency, power, locked-rotor current, power factor, torque, full-load current, and slip-belongs to acomplete testfor large electric motors under API 541 practice. A complete test is broader than a routine production test because it verifies the motor's full performance characteristics, not just basic manufacturing acceptability. These measurements are used to confirm that the motor meets its guaranteed operating and starting characteristics and that its electrical and mechanical performance aligns with the design and specification requirements.
Aroutine testis normally more limited and is intended to confirm standard production quality on each motor, such as winding resistance, insulation checks, no-load current, vibration, or similar baseline acceptance items.
Adesign testis generally associated with proving a design type rather than verifying all ordered motor performance data on a specific unit. Acompliance testis not the best match for this defined set of performance determinations. In API-aligned source inspection, these performance verifications are associated with thecomplete test, makingoption Athe correct answer.
질문 # 61
According to ANSI C57.12, the average winding temperature rise above ambient temperature shall not exceed what value?
정답：B
설명：
The correct answer isA. UnderANSI C57.12transformer requirements, theaverage winding temperature rise above ambientis commonly limited to65°Cfor standard transformer designs. This limit is important because transformer insulation life is strongly affected by operating temperature. If the winding temperature rise exceeds the permitted value, insulation aging accelerates, reducing transformer reliability and service life.
That is why temperature-rise testing is a key verification item during transformer manufacture and factory acceptance activities.
From a source inspection perspective, the inspector should verify that the transformer has been tested in accordance with the applicable standard, that the measured temperature-rise values are properly recorded, and that the results comply with the specified acceptance criteria. The average winding temperature rise is not the same as hotspot temperature, and it must be evaluated against the standard test method and rating basis. The other options are too high for the standard average winding rise value typically associated with ANSI C57.12.
In API-aligned source inspection and quality surveillance oftransformers, confirming compliance of factory test results such as temperature-rise performance is an essential part of final acceptance. Therefore,65°Cis the verified answer.
질문 # 62
A circuit breaker is defined as:
정답：B
설명：
The correct answer isC. Acircuit breakeris a switching and protective device used tomake, carry, and interrupt currentin an electrical circuit. In normal service, it can be used to energize and de-energize a circuit, and under abnormal conditions it is designed to open automatically to interrupt fault or overload current. In source inspection and quality surveillance of switchgear and related electrical equipment, the inspector verifies that the circuit breaker type, ratings, interrupting capacity, trip features, mechanical condition, and test documentation conform to the approved specification and equipment data.
OptionAdescribes afuse, which is a one-time overcurrent device that opens when its element melts. OptionBis too vague and better describes surge-protective or voltage-limiting devices rather than a circuit breaker.
OptionDrefers more closely to the construction of switchgear or motor control assemblies, not the breaker itself.
Although the formal standard definition of a circuit breaker includes its fault-interrupting function, the best available answer among the listed options isC, because it most closely identifies the breaker as the device used to switch a circuit on and off.
질문 # 63
Which edition of industry codes and standards applies to the equipment being inspected?
정답：C
설명：
The correct answer isD. The edition specified in the engineering design. In API source inspection practice, the inspector does not choose whichever code edition appears newest or most convenient. The applicable requirements are the ones defined by thepurchase order, engineering design documents, project specifications, approved drawings, and referenced codes and standards identified for that job. Source inspection is a verification function, so the inspector must confirm compliance against thecontractual and technical basis of designestablished for the equipment being manufactured.
This is important because different editions of the same standard may contain different rating rules, test requirements, construction details, or acceptance criteria. If an inspector were to apply the latest edition without project authorization, that could create conflict with the approved design basis and lead to incorrect acceptance or rejection. Likewise, the edition found at the point of use or supplied by the inspection agency is not automatically controlling unless it matches the project's specified design basis.
Therefore, for inspection and quality surveillance of electrical equipment, the governing edition is theedition specified in the engineering designand related contract documents.
질문 # 64
......
API-SIEE시험대비 공부: https://www.pass4test.net/API-SIEE.html