참고: Pass4Test에서 Google Drive로 공유하는 무료, 최신 H35-580_V2.0 시험 문제집이 있습니다: https://drive.google.com/open?id=10i31N1gYrIb3H7Gxq5gHBrTGh2k4SGyK
우리Pass4Test에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리Pass4Test는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리Pass4Test 사이트에서 제공하는Huawei H35-580_V2.0관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.
| Section | Weight | Objectives |
|---|---|---|
| 5G Base Station Overview and Basic Operations | 10% | - 5G Base Station Installation and Deployment - 5G Base Station Configuration and Commissioning - 5G Base Station Products and Hardware Composition - 5G Base Station Maintenance and Fault Handling |
| Fundamentals of 5G Network Optimization | 30% | - Network Optimization Process and Methods - Coverage Optimization - Capacity and Throughput Optimization - Mobility Optimization - Interference Optimization - Performance Monitoring and Evaluation Indicators |
| Fundamentals of 5G Network Planning | 20% | - Wireless Environment Analysis and Coverage Planning - Parameter Planning and Configuration - 5G Network Planning Process and Principles - Site Survey and Design - Capacity and Interference Planning |
| 5G Wireless Network Principles | 20% | - 5G NR Channels and Signals - 5G NR Mobility and Power Control - 5G NR Overview and Key Technologies - 5G NR Frame Structure and Physical Resources |
| Basic Features of 5G Wireless Networks | 20% | - Beam Management and Optimization - Massive MIMO Technology - Flexible Duplex and Spectrum Sharing - 5G QoS and Slicing |
>> Huawei H35-580_V2.0유효한 최신덤프 <<
이 산업에는 아주 많은 비슷한 회사들이 있습니다, 그러나 Pass4Test는 다른 회사들이 이룩하지 못한 독특한 이점을 가지고 있습니다. Pss4Test Huawei H35-580_V2.0덤프를 결제하면 바로 사이트에서Huawei H35-580_V2.0덤프를 다운받을수 있고 구매한Huawei H35-580_V2.0시험이 종료되고 다른 코드로 변경되면 변경된 코드로 된 덤프가 출시되면 비용추가없이 새로운 덤프를 제공해드립니다.
질문 # 54
Which of the following materials does not need to be prepared before site survey?
정답：A
설명：
Explanation
According to the 5G Site Survey Guide (V1.0) (PDF)-EN, the engineering file is not a material that needs to be prepared before site survey. The engineering file is a document that records the site survey results and the design plan for the site. The engineering file is generated after the site survey is completed and approved by the customer. The materials that need to be prepared before site survey are:
Local map: A map of the area where the site is located, showing the roads, buildings, landmarks, and other features. The local map helps the site survey team to plan the route, identify the site location, and evaluate the surrounding environment.
Site survey table: A table that lists the items and parameters that need to be checked and measured during the site survey, such as antenna installation space, equipment room space and load bearing capacity, power supply, grounding, lightning protection, cable routing, etc. The site survey table helps the site survey team to conduct a comprehensive and systematic inspection of the site conditions and record the data.
5G antenna height table: A table that shows the recommended antenna height for different scenarios and frequency bands based on empirical data and theoretical calculations. The 5G antenna height table helps the site survey team to determine the optimal antenna installation height for achieving the best coverage and performance.
Therefore, the correct answer is D.
질문 # 55
In a Huawei base station, which of the following bearers can only be configured as an MCG bearer?
정답：C
설명：
Explanation
According to the LTE-NR tight-interworking and the first steps to 5G, in a Huawei base station, QCI2 can only be configured as an MCG (Master Cell Group) bearer. QCI2 is a voice bearer that requires low latency and high reliability. Therefore, it cannot be configured as an SCG (Secondary Cell Group) bearer or a split bearer that may introduce additional delay or packet loss. QCI6, QCI9, and QQ1 can be configured as either MCG bearers, SCG bearers, or split bearers depending on the service requirements and network conditions.
질문 # 56
Which of the following modules is responsible for the selection of PCF during the PDU session establishment process?
정답：C
설명：
The Session Management Function (SMF) is responsible for selecting the appropriate PCF during PDU session establishment.
질문 # 57
In RAN3.0, for the mobility algorithm of SA network, how many A2 thresholds can be set on the base station side?
정답：A
설명：
RAN3.0 supports the configuration of two A2 thresholds to enable flexible mobility and measurement control strategies.
질문 # 58
Which of the following items can be used for measurement evaluation in idle mode during coverage problem analysis?
정답：A
설명：
According to the HCIA-5G V2.0 Exam Outline , SS-RSRP is the reference signal received power of the synchronization signal block (SSB) in NR systems. It can be used for measurement evaluation in idle mode during coverage problem analysis, which corresponds to option D. OPMI is an indicator of uplink interference power measurement, CSI-RSRP is the reference signal received power of the channel state information reference signal (CSI-RS), and SRS is the sounding reference signal. These indicators are used for measurement evaluation in connected mode, not idle mode, which correspond to options A, B, and C.
질문 # 59
......
Pass4Test선택으로Huawei H35-580_V2.0시험을 패스하도록 도와드리겠습니다. 우선 우리Pass4Test 사이트에서Huawei H35-580_V2.0관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의Pass4Test에 신뢰감을 느끼게 됩니다. Pass4Test에서 제공하는Huawei H35-580_V2.0덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
H35-580_V2.0퍼펙트 덤프문제: https://www.pass4test.net/H35-580_V2.0.html
Pass4Test H35-580_V2.0 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=10i31N1gYrIb3H7Gxq5gHBrTGh2k4SGyK