Latest 300-515 Practice Questions - New 300-515 Exam Cram

Begin Your Preparation with Cisco 300-515 Real Questions. The DumpsQuestion is a reliable platform that is committed to making your preparation for the Cisco 300-515 examination easier and more effective. To meet this objective, the DumpsQuestion is offering updated and real Understanding Implementing Cisco Service Provider VPN Services exam dumps. These Cisco 300-515 Exam Questions are approved by experts.

Cisco 300-515 Exam Syllabus Topics:

Section	Objectives
VPN Fundamentals in Service Provider Networks	- MPLS VPN architecture 1. Route distinguisher and route target usage 2. VRF concepts and implementation - VPN models 1. Layer 3 VPN basics 2. Layer 2 VPN basics
MPLS VPN Services Implementation	- L3VPN configuration 1. PE-CE routing protocols 2. MP-BGP for VPNv4 routes - L2VPN services 1. EVC-based services 2. VPWS and VPLS concepts
Advanced VPN Technologies	- Inter-AS VPN architectures - Segment routing integration with VPNs - Multicast VPN (MVPN)
Service Provider VPN Operations	- Troubleshooting VPN connectivity - QoS in MPLS VPN environments - Performance and scalability considerations

>> Latest 300-515 Practice Questions <<

300-515 Pass4sure Guide & 300-515 Exam Preparation & 300-515 Study Materials

There are more opportunities for possessing with a certification, and our 300-515 study tool is the greatest resource to get a leg up on your competition. When it comes to our time-tested 300-515 latest practice materials, for one thing, we have a professional team contains a lot of experts who have devoted themselves to development of our 300-515 Exam Guide, thus we feel confident enough under the intensely competitive market. For another thing, conforming to the real exam our 300-515 study tool has the ability to catch the core knowledge. So our customers can pass the exam with ease.

Cisco Implementing Cisco Service Provider VPN Services Sample Questions (Q105-Q110):

NEW QUESTION # 105
Refer to the exhibit. PE1 and PE2 are exchanging VPNv4 routes for CE1 and CE2, and PE3 contains the default route to the internet. If the three devices are operating normally, which two conclusions describe this configuration? (Choose two.)

A. All three routers must be running a distance-vector routing protocol.
B. Only the CE2 VRF can access the default route provided by the Internet VRF.
C. The CE1 and CE2 VRFs can exchange routes only between their respective VRFs on PE1 and PE2.
D. All three routers must be running MP-BGP.
E. The CE1 and CE2 VRFs can access the default route provided by the Internet VRF.

Answer: B,D

Explanation:
Let me trace the route-target (RT) import/export relationships, since that's what determines route leaking between VRFs:

A route tagged with an export RT is installed by any VRF importing that same RT.
CE1 exports 100:1 → imported by CE2 and Internet
CE2 exports 200:2 → imported by CE1 and Internet
Internet exports 300:3 → imported by CE2 only (CE1 does not import
300:3)
Exchanging VPNv4 prefixes between PE routers across the MPLS backbone requires MP-BGP (the VPNv4 address family carries the RD, route targets, and VPN labels). Without MP-BGP running on all three PEs, none of this RT-based route leaking happens. This is a baseline requirement of MPLS L3VPN.
The default route lives in the Internet VRF, which exports 300:3. Only CE2 imports 300:3, so only the CE2 VRF installs and can use that default route. CE1 imports just 200:2 - it never imports
300:3, so it cannot reach the Internet VRF's default route. Hence only CE2 has Internet access.

NEW QUESTION # 106
Refer to the exhibit. Which result occurs when PE1 learns a new MAC address and all three PEs are enabled with EVPN native?

A. The new MAC address is sent by BGP to PE2 and PE3 as a Type 2 BGP route.
B. The MAC address is entered into the CAM table and is classified for use on the native VLAN
C. The MAC address is entered into the CAM table only if it is learned on the native VLAN.
D. A system notification is sent to the network administrator that triggers the manual configuration of the new MAC address on PE2 and PE3.

Answer: A

NEW QUESTION # 107
SIMULATION 6

Guidelines
This is a lab item in which tasks will be performed on virtual devices.
Refer to the Tasks tab to view the tasks for this lab item

Refer to the Topology tab to access the device console(s) and perform the tasks.

Console access is available for all required devices by clicking the device icon or using the

tab(s) above the console window.
All necessary pre-configurations have been applied.

Do not remove any existing configurations from the devices, only those necessary to make the

appropriate changes required to fulfill the listed tasks.
Do not change the enable password or hostname for any device.

Save your configurations to NVRAM before moving to the next item.

Click Next at the bottom of the screen to submit this lab and move to the next question.

When Next is clicked, the lab closes and cannot be reopened.

Topology

Tasks
CE1 and CE2 are IPv6 Customer Premise Equipment of two customers that communicate with each other through the MPLS L3VPN core comprising Provide Edge PE1, PE2, and route- reflector RR.
Perform the below configuration and verification tasks as noted.
1. Troubleshoot and modify the CEs to establish IPv6 BGP sessions with the PEs.
2. Troubleshoot and modify the PEs to receive the remote CE's advertised route in their BGP VRF table.
Initial configuration with IPv6 addressing has been completed. Do not change the configurations except to fulfill the abovementioned tasks.
Apply the solution with the minimum configuration.

Answer:

Explanation:
See explanation below.
Explanation:
CE1

CE2

PE1

PE2

Route-Reflector (RR)

CE routers: Enabling the IPv6 address-family, activating the PE neighbor, and advertising the internal /128 loopbacks brings the eBGP IPv6 sessions up.
PE routers:
Under address-family ipv6 vrf CUST the CE neighbors are activated so the PE learns the

customer routes.
Matching route-target import/export ensures those VPNv6 routes are exported to RR and

imported by the remote PE.
Activating the RR neighbor under address-family vpnv6 allows VPNv6 prefixes to flow between

PEs through the route-reflector.
RR: Activating each PE as a VPNv6 peer reflects the VPNv6 routes between them, so each PE receives the remote CE's IPv6 prefixes in its VRF BGP table.

NEW QUESTION # 108
Refer to the exhibit.

While provisioning a new BGP session between the PE and CE router, you issue the as- override command. Which statement describes modification of the prefix before being sent to the CE router (10.10.10.1)?

A. The first AS changes, but no other autonomous systems change.
B. The fourth AS changes, but no other autonomous systems change.
C. The second and third autonomous systems change.
D. The first and fourth autonomous systems change.

Answer: A

NEW QUESTION # 109
Refer to the exhibit.

A technician is troubleshooting a connectivity issue and notices that there is no IS-IS adjacency between R1 and R2. What can the technician change to bring the IS-IS adjacency up?

A. Change R1's is-type to level-2-only
B. Change R2's configuration to no longer set the overload bit.
C. Change R1's net address to be in the same area as R2.
D. Change R2's net address to be in the same area as R1.

Answer: A

NEW QUESTION # 110
......

With the help of DumpsQuestion’s marvelous brain dumps, you make sure your success in 300-515 certification exam with money back guarantee. DumpsQuestion serves a huge network of its clientele with the state of the art and exam-oriented short-term study content that requires as little as a two-week time to get ready the entire 300-515 Certification syllabus.

New 300-515 Exam Cram: https://www.dumpsquestion.com/300-515-exam-dumps-collection.html